The HP Envy 13-bf touchscreen replacement assembly is now available at Mascom International for KSh 18,500, covering the 13.3-inch WUXGA (1920 x 1200) IPS touch panel fitted to HP's Envy x360 13-bf convertible range. This is a complete display-and-digitizer unit, not a bare glass sheet, so the screen and the touch layer arrive as one matched part. Mascom International supplies and fits the HP Envy 13-bf screen at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. The panel carries a 30-pin eDP connector, an LED backlight, and 400 nits of brightness, matching the factory specification of the original HP Envy 13-bf.
A cracked screen turns a working convertible into a paperweight, and that is the exact problem this HP Envy 13-bf replacement solves. It suits university students who dropped a machine mid-semester, consultants who cracked a screen in a matatu or on a Thika Road commute, and small-business owners who cannot lose a laptop to a two-week overseas repair. Rather than shipping the whole machine abroad or paying for a new unit, owners fit a fresh HP Envy 13-bf touch panel and keep every file, licence, and setting exactly where it was. The repair restores full touch, pen input, and the folding x360 hinge action.
At Mascom International, we're seeing more Kenyans hold onto capable convertibles for four and five years, and a single cracked panel should not end that run. Unlike other electronics retailers in Kenya who quote a full-machine swap, Mascom International stocks the HP Envy 13-bf screen as a named part with a clear KSh 18,500 price and same-day fitting. Customers across Nairobi report that a repaired unit reads and responds like the original once the correct panel goes in. Walk into our Kimathi Street counter with the laptop, or order the part for countrywide pay-on-arrival delivery.
Common Questions About the HP Envy 13-bf touchscreen replacement assembly
How much does an HP Envy 13-bf screen replacement cost in Kenya?
The HP Envy 13-bf touchscreen assembly costs KSh 18,500 at Mascom International, and that figure covers the full display-and-digitizer part. Fitting at our Kimathi Street counter is quoted separately and confirmed before any work starts, so there are no surprise charges. This price applies to the standard 13.3-inch WUXGA (1920 x 1200) IPS touch version, which is the panel most Envy x360 13-bf units in Kenya carry. Higher-resolution WQXGA and OLED versions of the same laptop use different panels at different prices. Bring the machine or its model number and Mascom International confirms the exact match before you pay.
Which HP Envy models does this replacement screen fit?
This assembly fits the HP Envy x360 13-bf and 13t-bf convertible series, including common units such as the 13-bf0013dx and 13-bf0747nr. It is the 13.3-inch, 16:10, 1920 x 1200 IPS touch panel with a 30-pin eDP connector. It does not fit the 2560 x 1600 WQXGA version or the 2880 x 1800 OLED version, which use their own panels. Because HP shipped the Envy 13-bf in three resolutions, matching yours matters. Mascom International checks your exact model and screen resolution against the part before fitting, which stops the single most common cause of a failed swap.
Is this a genuine HP screen or a compatible part?
This is a genuine-compatible replacement panel built to HP's original Envy 13-bf specification: same 13.3-inch size, same 1920 x 1200 resolution, same 400-nit IPS touch layer, same 30-pin connector. Mascom International states this plainly rather than passing an aftermarket part off as factory HP stock. In real use the picture, touch response, and pen support match the panel HP fitted at the factory. Every unit is tested before it leaves our counter, and it carries a 6-month Mascom International warranty. If you specifically need an HP-branded original pull, tell us and we will source and quote that separately.
How do I know which HP Envy 13-bf screen I have?
The quickest route is to bring the laptop to Mascom International so our team reads the panel directly. If you prefer to check first, the model number sits on the base of the machine, and the display resolution appears under Windows Display Settings. A 1920 x 1200 reading means the standard WUXGA touch panel this listing covers. Readings of 2560 x 1600 or 2880 x 1800 point to the higher-resolution or OLED versions, which need a different part. Getting this right before purchase is what separates a clean repair from a returned screen.
Does Mascom fit the screen or do I install it myself?
Both options are open. Most customers hand the HP Envy 13-bf to our Kimathi Street counter and collect it fitted and tested the same day, which removes the risk of a cracked digitizer or a torn ribbon cable during a DIY attempt. If you run a repair workshop upcountry or prefer to fit it yourself, Mascom International ships the part alone across all 47 counties on pay-on-arrival terms. Fitting an x360 convertible panel calls for careful bezel removal and cable transfer, so in-store fitting is the safer path for most owners.
Will touch and pen input still work after the replacement?
Yes. This is a full touch-and-digitizer assembly, so the finished repair restores ten-point touch, on-screen typing, and pen support exactly as the HP Envy 13-bf had from the factory. The x360 hinge still folds through tent, stand, and tablet modes once the panel is seated. Because the glass and touch sensor come bonded as one part, you avoid the calibration gaps that appear when only a bare LCD gets swapped. Mascom International tests touch across the whole surface before returning the machine to you.
How long does the screen replacement take?
In-store fitting at Mascom International is usually a same-day job, and many HP Envy 13-bf swaps are ready within a few hours when the matched panel is in stock. Bring the laptop early in the day, Monday to Saturday between 9:00 AM and 7:00 PM, and our Kimathi Street service desk works through the bezel removal, cable transfer, seating, and full touch test. For customers ordering the part for delivery, Nairobi reaches you the same day and major towns the next business day.
What warranty covers the replacement screen, and what if it arrives faulty?
The HP Envy 13-bf touchscreen carries a 6-month Mascom International warranty covering panel and touch functionality under normal use. Every unit is tested for dead pixels, backlight evenness, and touch response before it leaves our counter. If a panel develops a fault within the warranty window, our Nairobi CBD service desk handles the claim directly. Accidental cracks after fitting are not covered, as with any glass part, but a genuine functional defect is replaced. This backing is why buyers across Kenya treat Mascom International as the safe place to source a screen.
Can I get the HP Envy 13-bf screen delivered outside Nairobi?
Yes. Mascom International ships the HP Envy 13-bf panel across all 47 Kenyan counties on pay-on-arrival terms, so you inspect the part and pay only when it reaches you. Nairobi and its environs receive same-day delivery, major towns get it within one business day, and the farthest counties receive it within two to three business days. Customers in Nakuru, Eldoret, Kisumu, Mombasa, and Nyeri order Envy 13-bf parts through Mascom International regularly. Local technicians then fit the tested panel using the reused cable and hinges.
Technical Specifications
Display Panel and Resolution
- 13.3-inch diagonal panel matching the original HP Envy 13-bf footprint, so it seats in the existing lid.
- Native resolution of 1920 x 1200 (WUXGA) for the sharp text this convertible shipped with.
- 16:10 aspect ratio gives extra vertical height for documents, code, and web pages over a 16:9 screen.
- IPS technology holds colour and contrast steady at wide viewing angles for shared screen use.
- 400 nits of brightness matches the factory panel, keeping the screen readable under Nairobi office lighting.
- LED backlight draws modest power, so battery runtime after fitting tracks the original.
Touch Digitizer and Glass Layer
- Ten-point capacitive touch layer bonded to the glass restores full finger control after fitting.
- Pen and stylus input works as before, useful for signatures, sketches, and marking up PDFs.
- Bonded glass-and-sensor build avoids the touch dead zones that appear when panels are mismatched.
- Toughened outer glass returns the surface to a usable state after a cracked or shattered original.
- Touch surface is tested edge to edge before handover so no unresponsive strips reach the customer.
- Supports the x360 fold into tablet mode, where touch does the work of the closed keyboard.
Model Compatibility and Correct Fit
- Fits HP Envy x360 13-bf and 13t-bf convertibles, including the 13-bf0013dx and 13-bf0747nr units.
- Built for the 1920 x 1200 IPS touch configuration, the most common Envy 13-bf panel in Kenya.
- Does not fit 2560 x 1600 WQXGA or 2880 x 1800 OLED versions, which need their own parts.
- Resolution and model are checked against your machine before fitting to prevent a wrong-part swap.
- Available in Natural Silver to match the standard Envy 13-bf lid finish.
- Bring the laptop or its product number so Mascom International confirms the match in minutes.
Connector, Backlight, and Installation
- 30-pin eDP connector matches the Envy 13-bf socket, so the original display cable is reused.
- Not compatible with 40-pin cables, another reason exact-model matching matters before purchase.
- Original ribbon cable, hinges, back cover, and webcam are retained from your machine during fitting.
- Careful bezel removal protects the frame, which is why in-store fitting suits most owners.
- Cable seating and connector alignment are tested for flicker before the lid is closed.
- Same-day counter fitting removes the risk of cracking a fresh panel during a home attempt.
What the Replacement Restores
- Full picture on a cracked, black, lined, or flickering Envy 13-bf, returning the machine to daily use.
- Complete touch and pen control for note-taking, drawing, and app navigation in tablet mode.
- Original 16:10 workspace for spreadsheets, legal documents, and long web pages.
- Factory-level brightness so the screen stays clear during outdoor and bright-window work.
- A repair that keeps your files, Windows licence, and settings untouched, unlike buying a new laptop.
- Extended service life on a convertible that is otherwise sound apart from the broken glass.
Quality Testing and Handling
- Each panel is bench-tested for dead pixels before it is offered to a customer.
- Backlight evenness is checked so there are no dark patches or bright bleed at the edges.
- Touch calibration is verified across the full surface during the pre-handover test.
- Panels are stored flat and handled by the frame to avoid pressure marks before fitting.
- Anti-static handling during the swap protects the digitizer and the mainboard socket.
- A final power-on test confirms picture, touch, and hinge action before the laptop leaves the desk.
What You Receive
- One HP Envy 13-bf touchscreen assembly: 13.3-inch WUXGA IPS panel with bonded touch digitizer and bezel.
- Bench-testing before handover for picture, backlight, and touch across the full surface.
- Optional same-day fitting at our Kimathi Street counter, quoted and confirmed before work starts.
- Guidance on reusing your original cable, hinges, and back cover if you fit it yourself.
- Note: the assembly does not include the display cable, hinges, back cover, webcam, or hinge covers — these are retained from your existing machine.
Warranty
The HP Envy 13-bf touchscreen carries a 6-month Mascom International warranty covering panel and touch functionality under normal use. Every unit is tested for dead pixels, backlight evenness, and touch response before handover. Our Nairobi CBD service desk handles any warranty claim directly. Accidental cracks after fitting fall outside cover, as with any glass part.
Where to Buy the HP Envy 13-bf Screen Replacement in Kenya
The HP Envy 13-bf touchscreen assembly is available now at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, with your laptop, and our service desk confirms the exact panel match, fits it, and tests touch across the full surface the same day. Available finish: Natural Silver.
Order or enquire through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the HP Envy 13-bf panel across all 47 Kenyan counties with pay-on-arrival delivery you inspect the part and pay only when it reaches you. Nairobi and its environs receive same-day delivery, major towns get it within one business day, and the farthest counties within two to three business days. Buyers across Kenya rely on Mascom International for correctly matched parts, honest specifications, and warranty backing on every laptop screen we supply. Bring the model number, and our Kimathi Street team gets your convertible working again.
