The HP Envy 13-bf OLED touch screen replacement is now available at Mascom International for KSh 25,500, a full 13.3-inch display assembly running 2880 x 1800 resolution (2.8K, WQXGA+) with an integrated touch layer and a 40-pin connector. This OLED assembly fits the HP Envy 13-bf0000 series and matching HP Envy 13-bf convertibles. Mascom International stocks the HP Envy 13-bf screen at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. The part arrives as one bonded unit, with the OLED panel and the touch glass fused together, ready for a technician to fit into a cracked or dead laptop.
A broken display does not mean buying a new machine. This HP Envy 13-bf replacement brings a damaged Envy back to full working order for a small fraction of a new laptop's price. It suits computer repair technicians along Luthuli Avenue and Moi Avenue, HP Envy owners who dropped their laptop on a matatu commute, university students at Strathmore and USIU facing a spider-cracked screen before exams, and freelancers who cannot afford days of downtime. Mascom International supplies the exact 40-pin OLED assembly the HP Envy 13-bf needs, so touch response, color, and brightness match the original factory display rather than a downgraded substitute.
Unlike other electronics retailers in Kenya that fit generic LCD panels into OLED machines, Mascom International supplies the correct OLED assembly for the HP Envy 13-bf, matching resolution, connector, and touch behaviour. Repair technicians across Nairobi report that an OLED-for-OLED swap avoids the washed-out color and dimmer picture of a mismatched part. Buyers throughout Kenya order this HP Envy 13-bf screen with pay-on-arrival delivery to all 47 counties, checking the panel before paying. Walk in to the Kimathi Street counter to confirm the part number against your machine, or call first to verify compatibility before you order the replacement.
Common Questions About the HP Envy 13-bf OLED touch screen replacement
Which HP Envy laptops does this 40-pin OLED screen fit?
This assembly fits the HP Envy 13-bf0000 series and the HP Envy 13-bf range, including the 13-bf0xxx and 13t-bf000 model numbers. It uses the same 2880 x 1800 OLED panel, the same touch digitizer, and the same 40-pin connector as the factory unit, so it seats without adapters. The safest way to confirm a match is to read the model number printed on the base of your laptop, then compare it to the bf-series list. You can also bring the machine to our Kimathi Street counter, where our team checks the panel type against your unit before dispatch.
Is this a real OLED panel or a cheaper LCD copy?
This is a genuine OLED assembly, not an LCD stand-in. OLED panels light each pixel individually, so blacks read as true black and contrast stays high, which an LCD substitute cannot match. The panel covers 100% of the DCI-P3 color range and reaches around 400 nits of brightness, holding accurate color for photo work and clear text in bright rooms. A common shortcut in Kenya's repair market is fitting a dimmer LCD into an OLED laptop to cut cost. Mascom International supplies the matched OLED part so your Envy keeps the display quality it left the factory with.
What is the difference between the full assembly and just the glass?
The full assembly bonds the OLED panel, the touch digitizer, and the front glass into one sealed unit, while a glass-only repair replaces the outer layer alone. On the HP Envy 13-bf, the glass and panel are fused, so a technician cannot split them cleanly without risking dead pixels or a broken touch layer. Buying the complete assembly removes that risk. You get the picture, the touch response, and the glass in a single part that drops in as one piece, which is why Mascom International stocks the whole unit rather than loose glass.
Will the color and brightness match my original Envy screen?
Yes. Because this is the same OLED panel specification HP fitted at the factory, the color range, brightness, and contrast return to their original levels after the swap. The 100% DCI-P3 coverage keeps skin tones and brand colors accurate, which matters for designers, photographers, and content creators editing on the go. Around 400 nits of brightness keeps the screen readable near a window or under office lighting. A mismatched LCD would leave the picture visibly duller and flatter. This matched OLED assembly keeps the HP Envy 13-bf looking as it did before the damage.
How do I check the 40-pin connector matches my laptop?
The 40-pin ribbon connector carries both the display signal and the touch data on the HP Envy 13-bf, so pin count is the first thing to confirm. Open the laptop lid, note the model number on the base, and match it to the bf-series range this part covers. If your original cable ends in a 40-pin plug, this assembly connects directly. Screens with a 30-pin connector belong to non-touch or different HP models and will not fit. Our Kimathi Street team confirms the connector against your machine before you buy, so you avoid ordering the wrong part.
Is KSh 25,500 worth it instead of buying a new laptop?
For most owners, yes. A working HP Envy 13-bf with a strong processor and OLED screen sells well above KSh 90,000 in Kenya, so a KSh 25,500 screen swap keeps a capable machine in service for a fraction of a replacement. The repair makes sense when the rest of the laptop still runs well and only the display is cracked, dead, or flickering. If the board or battery has also failed, our technicians advise you honestly on whether the repair adds up. For a drop-damaged but otherwise healthy Envy, the screen replacement is the sensible choice.
Can I install this screen myself, or should a technician do it?
Both are possible. You can buy the HP Envy 13-bf screen as a part and fit it yourself or through your own technician, or have Mascom International fit it at our Nairobi CBD store while you wait. OLED assemblies are delicate because the bonded glass and the touch ribbon sit under tension, so a steady hand and the right tools matter. Most owners prefer in-store fitting to avoid cracking a brand-new panel during a rushed swap. Our technicians open, transfer, seat, and test the assembly on your machine, then confirm touch and picture with you before handover.
What warranty and delivery come with this Envy screen?
The HP Envy 13-bf screen replacement carries a 6-month Mascom International warranty covering manufacturing defects such as dead pixels, touch failure, or backlight faults present in the part itself. The cover does not extend to accidental cracks caused during self-installation, which is why many buyers choose in-store fitting. Delivery reaches all 47 counties on pay-on-arrival terms, so you inspect the panel before paying. Nairobi and nearby towns receive the part same day, major towns within one business day, and outer counties within two to three business days.
Technical Specifications
Display Panel and Resolution
- 13.3-inch OLED panel at 2880 x 1800 resolution (2.8K, WQXGA+) for sharp text and fine image detail
- 16:10 aspect ratio matches the taller HP Envy 13-bf chassis and shows more document height per screen
- OLED technology lights each pixel individually, producing true black and high contrast that LCD cannot reach
- Around 400 nits of brightness keeps the screen readable near windows and under bright office lighting
- 100% DCI-P3 color coverage holds accurate tones for photo editing, design work, and video review
- 60Hz refresh rate matches the factory panel, so scrolling and video look identical to the original screen
- Panel reference ATNA33AA01, aligning with HP part numbers N15663-001 and M93268 for technician verification
Touch Layer and Connector Interface
- Capacitive touch digitizer bonded to the panel restores finger taps, swipes, and multi-touch gestures after fitting
- 40-pin ribbon connector carries display and touch signals together, matching the factory HP Envy 13-bf cable
- Single-cable design keeps installation simpler, since one connector handles both the picture and the touch data
- Touch layer supports the same gesture range as the original, so pinch-to-zoom and scrolling behave normally
- Connector keying prevents a reversed plug, reducing the risk of a wrong connection during a repair
- Bonded construction seals out dust between glass and panel, avoiding trapped particles common with loose-glass repairs
Compatibility and Model Coverage
- Fits HP Envy 13-bf0000 and 13-bf0xxx series laptops sold with the 2.8K OLED touch option
- Covers HP Envy x360 13-bf convertibles and 13t-bf000 configurations using the same 40-pin OLED panel
- Direct replacement for cracked, black, flickering, or line-streaked original OLED displays on these models
- Not compatible with 30-pin non-touch HP Envy units or FHD LCD variants, which use a different panel
- Model number on the laptop base confirms the exact match before ordering or in-store fitting
- Mascom International verifies the panel against your machine at the Kimathi Street counter to prevent mismatches
Build Construction and Assembly Format
- Ships as a complete display assembly, with OLED panel, touch digitizer, and front glass fused as one unit
- Thin glass front resists everyday fingerprint smudging and cleans easily with a microfibre cloth
- Slim panel profile matches the original lid depth, so the laptop closes flush after fitting
- Factory-direct part built to the OEM specification, holding the original color and brightness targets
- Rigid backing supports the bonded glass, reducing flex that can crack thinner aftermarket panels
- Dead-pixel handling follows the ISO 13406-2 standard, the same tolerance benchmark HP applies
Installation and Fitment Notes
- Fitting involves removing the damaged lid, transferring the assembly, and reseating the 40-pin cable carefully
- Static-safe handling and plastic pry tools protect the touch ribbon during transfer between lids
- Mascom International offers in-store fitting at Kimathi Street, tested on your machine before handover
- Self-installers should work slowly, since bonded OLED glass cracks under uneven pressure
- Our technicians confirm touch response and full-screen picture before returning the laptop to you
- Fitting guidance is shared with upcountry buyers who use a local technician after pay-on-arrival delivery
What's in the Package
The HP Envy 13-bf OLED touch screen replacement ships as one complete display assembly: the OLED panel, the touch digitizer, and the bonded front glass fused into a single unit with the 40-pin connector attached. It arrives in factory protective packaging built to guard the glass in transit. Installation tools and lid adhesive are available separately at Mascom International, and our Kimathi Street team can fit the part on request. No laptop chassis, battery, or hinge is included, since this is a display-only replacement part.
Warranty and Support
The HP Envy 13-bf OLED screen replacement carries a 6-month Mascom International warranty on manufacturing defects, covering dead pixels, touch failure, and backlight faults present in the part. The cover excludes accidental cracks during self-installation, so we recommend in-store fitting. Our Nairobi CBD service desk handles any warranty claim directly, checking the panel against your original purchase.
Where to Buy the HP Envy 13-bf Screen Replacement in Kenya
The HP Envy 13-bf OLED touch screen replacement is available now at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday to Saturday, 9:00 AM to 7:00 PM, to confirm the part number against your laptop or have the screen fitted while you wait. Bring the machine so our technicians can check the 40-pin connector and model number before you buy.
Order through any of these:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
- WhatsApp: +254 708 852 521
Mascom International ships the HP Envy 13-bf screen across all 47 Kenyan counties with pay-on-arrival delivery, so you inspect the panel and pay only when it reaches you. Nairobi and nearby towns receive the part same day, while Mombasa, Kisumu, Nakuru, and Eldoret receive it within one business day. Outer counties receive delivery within two to three business days, with fitting guidance shared for your local technician.
Buyers across Kenya rely on Mascom International for the correct panel, honest compatibility checks, and direct after-sales backing on every laptop screen we stock. Whether you run a repair shop on Luthuli Avenue or own a single Envy that took a fall, our team confirms the right 40-pin OLED assembly before you spend a shilling.
