The HP Spectre x360 13-ap Touch Screen Replacement is now available at Mascom International for KSh 23,000, a 13.3-inch FHD (1920 x 1080) IPS touch display assembly built to fit the HP Spectre x360 13-ap0000, 13-ap0xxx, and 13t-ap000 convertible series. This full assembly combines the LCD panel, the capacitive touch digitizer, and Corning Gorilla Glass NBT in a single unit that matches the original 30-pin connector. Mascom International stocks the HP Spectre x360 13-ap screen at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, with in-store fitting available the same day you walk in.
A cracked or dead screen on the HP Spectre x360 13-ap does not mean replacing the whole laptop. This part suits owners whose display shows spider cracks, black patches, flickering lines, or a touch layer that stopped responding after a drop. Business owners who run the Spectre as a daily 2-in-1, university students at Strathmore and USIU who take notes in tablet mode, and consultants who fold the machine flat during client meetings all depend on a working touch panel. Rather than paying six figures for a fresh convertible, the HP Spectre x360 13-ap screen restores full function for KSh 23,000.
Unlike other electronics retailers in Kenya that fit generic panels or lower-grade non-touch displays into convertibles, Mascom International sources the correct HP Spectre x360 13-ap assembly with the touch digitizer and glass intact. Customers across Nairobi report that a matched assembly brings back both the picture and the finger and pen response, not just the image. Our technicians test every HP Spectre x360 13-ap screen on the actual machine before you leave the counter. Walk in to Kimathi Street to have it fitted while you wait, or order for countrywide pay-on-arrival delivery to all 47 counties.
Common Questions About the HP Spectre x360 13-ap Touch Screen Replacement
Is this the correct screen for my HP Spectre x360 13-ap?
Yes, this 13.3-inch FHD assembly is cut for the HP Spectre x360 13-ap0000, 13-ap0xxx, and 13t-ap000 convertible range, the 2018 to 2019 models. It uses the same 1920 x 1080 IPS panel, the same touch digitizer, and the same 30-pin connector as the factory unit. The best way to confirm a match is to check the model number printed on the base of your laptop, or bring the machine to our Kimathi Street counter. Our team verifies the exact panel type against your unit before fitting or dispatch, so you never receive a screen that does not seat.
Does the replacement keep the touchscreen and pen working?
Yes. This is a full display assembly, not a bare LCD, so the touch digitizer and the Corning Gorilla Glass NBT layer come as one piece with the panel. Once fitted, finger taps, pinch-to-zoom, and multi-finger gestures respond as they did originally, and an HP active pen writes and draws normally in tablet mode. A common mistake in Kenya's repair market is fitting a cheaper non-touch or LCD-only panel, which leaves the picture working but the touch dead. Mascom International supplies the matched touch assembly so both the image and the touch return together.
How much does the HP Spectre x360 13-ap screen cost, and what does that price cover?
The HP Spectre x360 13-ap screen replacement is KSh 23,000 at Mascom International. That price covers the complete display assembly: the 13.3-inch FHD IPS panel, the touch digitizer, and the Corning Gorilla Glass front. In-store fitting by our technicians at Kimathi Street is included when you have the work done at our counter. The figure sits far below the cost of a new HP Spectre x360, which runs into six figures in Kenya, so a screen swap keeps a still-capable convertible in service for a small fraction of a replacement machine.
Can Mascom fit the screen for me, or do I only buy the part?
Both options are open. You can buy the HP Spectre x360 13-ap screen as a part and fit it yourself or through your own technician, or you can have Mascom International fit it at our Nairobi CBD store while you wait. Convertible screens are trickier than standard laptops because the hinge, the touch cable, and the glass all sit under tension, so most owners prefer in-store fitting. Our technicians open, transfer, seat, and test the assembly on your actual machine, then confirm the touch and picture with you before you pay for the fitting.
How long does the screen replacement take?
Most HP Spectre x360 13-ap screen fittings finish within the same visit, often inside one to two hours depending on the counter queue. The convertible design means the technician works carefully around the hinge and the touch ribbon cable, which takes a little longer than a plain laptop screen. If you walk in during our Monday to Saturday hours between 9:00 AM and 7:00 PM, you can usually leave the same day with the screen fitted and tested. For upcountry customers, we dispatch the part on pay-on-arrival delivery and share fitting guidance for your local technician.
What screen faults does this replacement fix?
This assembly fixes the full range of display damage on the HP Spectre x360 13-ap: shattered or spider-cracked glass, a black or blank screen, flickering, vertical or horizontal lines, dead or stuck pixels, bleeding patches, and a touch layer that no longer registers taps after a drop or knock. If your Spectre still powers on, charges, and runs but the picture or touch is damaged, a screen swap usually restores it to full daily use. Bring the machine to Kimathi Street and our technicians confirm the fault is the panel, not the cable or board, before fitting.
My Spectre came with a 4K screen. Will this FHD panel fit?
The HP Spectre x360 13-ap shipped in two display builds: this common FHD (1920 x 1080) IPS touch panel and a less common 4K UHD OLED touch panel. The two are not interchangeable, since the panels and cabling differ. If your unit left the factory as FHD, this assembly is the correct match. If yours is the 4K OLED build, tell our team and we source the matching 4K panel instead. Either way, confirm your exact display type with Mascom International first, using your model number or an in-store check, so you receive the right screen.
Technical Specifications
Screen and Resolution Details
- 13.3-inch diagonal display sized exactly to the HP Spectre x360 13-ap chassis for a flush, gap-free fit.
- Native FHD resolution of 1920 x 1080 keeps text, spreadsheets, and video sharp at the factory clarity.
- IPS panel technology holds accurate colour and steady brightness across wide side-on viewing angles.
- Micro-edge WLED backlight matches the original thin-bezel look of the Spectre convertible.
- 16:9 aspect ratio restores the same workspace proportions the laptop shipped with from HP.
- Matched panel type means Windows scaling and display settings work without any adjustment after fitting.
Touch Layer and Glass Protection
- Capacitive touch digitizer bonded to the panel restores tap, swipe, and pinch input in tablet mode.
- Corning Gorilla Glass NBT front resists scratches and everyday knocks better than plain replacement glass.
- Multi-touch support handles several finger points at once for map, drawing, and gesture control.
- HP active pen input works for note-taking and sketching once the matched assembly is fitted.
- Glossy finish reproduces the original Spectre screen look rather than a dull aftermarket surface.
- Single bonded unit avoids the air gaps and touch lag common with separately fitted digitizers.
Model Fitment and Compatibility
- Fits HP Spectre x360 13-ap0000, 13-ap0xxx, and 13t-ap000 convertible models from the 2018 to 2019 range.
- Designed for the FHD IPS configuration; the 4K OLED build needs the matching 4K panel instead.
- Model number on the laptop base confirms the exact fit before purchase or fitting.
- Not compatible with the earlier 13-ae or later 13-aw Spectre series, which use different panels.
- Mascom verifies your unit against the assembly before dispatch so you avoid a wrong-fit return.
- In-store checks at Kimathi Street remove the guesswork for owners unsure of their exact model.
Connector and Installation Notes
- 30-pin display connector matches the factory HP ribbon, so no adapters or modifications are needed.
- Full assembly swap transfers as one piece, reducing the risk of damaging the touch cable during fitting.
- Convertible hinge and touch ribbon sit under tension, so careful, tested fitting protects the new screen.
- Technicians disconnect the battery and adapter cable before opening the lid, as the panel handling requires.
- Fitting on the actual machine confirms picture and touch before the laptop is closed and returned.
- Self-fitting is possible for experienced users, though most Spectre owners choose in-store fitting for safety.
Build Quality and Sourcing
- Complete assembly ships with the panel, digitizer, and glass aligned and bonded at the correct factory tolerances.
- Sourced to match the original HP part rather than a lower-grade generic convertible display.
- New condition unit, not a salvaged or previously fitted screen pulled from another laptop.
- Consistent brightness and colour output tested before the part reaches Mascom International's Nairobi CBD counter.
- Correct thickness and mounting points keep the lid closing flush without pressure marks on the panel.
- Every unit checked for dead pixels and touch response before it is offered for sale or fitting.
Fitting Service and Testing
- In-store fitting at Kimathi Street is included when the replacement is done at our counter.
- Technicians test the picture, brightness, and full touch response on your machine before you pay for fitting.
- Same-visit turnaround for most units, usually within one to two hours during working hours.
- Fault confirmation first, so a cable or board issue is ruled out before a screen swap.
- Upcountry buyers receive the part on delivery plus fitting guidance for their local technician.
- Post-fitting checks confirm Windows display and touch settings behave exactly as before the damage.
What Mascom Provides
The HP Spectre x360 13-ap screen replacement comes as a complete 13.3-inch FHD IPS touch display assembly: the LCD panel, the bonded touch digitizer, and the Corning Gorilla Glass NBT front, with the factory-matching 30-pin connector. In-store fitting by Mascom International technicians at Kimathi Street is included when you have the work done at our counter, along with full picture and touch testing on your machine. Fitting guidance is shared with customers who order the part for delivery and fit through their own technician.
Warranty and Support
The HP Spectre x360 13-ap touch screen replacement carries a 6-month Mascom International warranty covering manufacturing defects on the panel, the touch layer, and the connector under normal use. Our Nairobi CBD service desk handles any warranty claim directly. The cover applies to faults in the part itself, verified against your original purchase, and does not extend to accidental damage after fitting.
Where to Buy the HP Spectre x360 13-ap Screen Replacement in Kenya
The HP Spectre x360 13-ap touch screen replacement is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, to have the screen fitted and tested on your laptop while you wait, or to confirm your exact panel type before you buy.
Three ways to order:
- Call +254 708 852 521
- Email info@mascomintl.com
- Order through www.mascomintl.com
Mascom International ships the HP Spectre x360 13-ap screen across all 47 Kenyan counties with pay-on-arrival delivery, so you only pay when the part reaches you. Nairobi, Mombasa, Kisumu, Nakuru, and Eldoret receive delivery within 1 business day. Outer counties including Lodwar, Wajir, Mandera, and Marsabit receive delivery within 2 to 3 business days.
This part carries a 6-month Mascom International warranty on manufacturing defects. Buyers across Kenya rely on Mascom International for correct fitment, honest pricing, and direct after-sales support on every laptop screen and spare we stock.
