The HP Envy 13-ar laptop screen replacement is a new 13.3-inch FHD (1920 x 1080) IPS multitouch display assembly, now available at Mascom International for KSh 20,500, with fitting done at our Nairobi CBD store. This part restores HP Envy 13-ar notebooks with cracked, blank, lined, or unresponsive touch panels. It matches the original micro-edge, BrightView, edge-to-edge glass design and keeps the 10-point touch layer fully working. Mascom International stocks this HP Envy 13-ar screen replacement at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, and fits it while you wait during working hours.
A broken laptop screen stops your whole day. The HP Envy 13-ar screen replacement fixes that for students at Strathmore, USIU, and University of Nairobi, plus remote workers, accountants, and small-business owners who depend on one machine. Rather than buying a new laptop for KSh 90,000 or more, this repair returns your Envy to full use for a fraction of that. Cracked glass, ink-like blotches, half-lit panels, dead touch, and vertical lines all point to a failed display that a fresh assembly clears.
At Mascom International, we're seeing more Kenyans repair capable laptops instead of replacing them. Unlike other electronics retailers in Kenya that only sell whole machines, Mascom International supplies and fits the exact HP Envy 13-ar display your notebook needs. Customers across Nairobi report their laptops looking and behaving like new after the swap. Walk in to test the fit and touch response at our Kimathi Street store, or order the part alone for delivery to your technician anywhere in Kenya through pay-on-arrival service.
Common Questions About the HP Envy 13-ar
What laptops does this HP Envy 13-ar screen replacement fit?
This display fits HP Envy 13-ar0xxx notebooks, the AMD Ryzen models sold from 2019, in the touchscreen version. It is a 13.3-inch FHD IPS assembly with a 30-pin connector. The Envy line includes several close-looking series such as 13-ah, 13-ad, 13-aq, and 13-ba, and their panels are not always interchangeable. Bring your laptop or its HP part number to our Kimathi Street store, and Mascom International confirms the correct match before fitting. Sending a clear photo of your current screen and model sticker on WhatsApp also works.
Is this a real HP screen or a copy?
This is a new, tested display assembly matched to the original HP Envy 13-ar specification, not a used or cracked pull. Most replacement panels come from the same makers HP uses, including BOE, LG, and AUO, so the picture, colours, and touch feel match the factory unit. If you need a genuine HP-branded boxed part with an HP part number, Mascom International can source one on request where stock allows, usually at a higher price. Either way, every screen is checked for dead pixels and touch accuracy before it leaves the store.
How much does the HP Envy 13-ar screen replacement cost?
The HP Envy 13-ar screen replacement is KSh 20,500 at Mascom International, and that price covers the display assembly plus professional fitting at our Nairobi CBD store. There are no hidden charges once the model is confirmed. A brand-new HP Envy 13 laptop costs KSh 90,000 and upward in Kenya, so this repair saves you the larger spend while keeping the machine you already know. Pay when the work is done and tested. If you only want the part for your own technician, ask us, and we quote the panel separately.
Can Mascom fit the screen, or do I install it myself?
Mascom International fits the screen for you at our Kimathi Street workshop, and most jobs finish in about 30 to 60 minutes while you wait. Our technicians remove the broken assembly, seat the new panel, reconnect the ribbon cable, test touch across the full glass, and check for dead pixels before handing the laptop back. If you are a technician yourself, buy the assembly alone and fit it in your own shop. We include adhesive tape for mounting, though a heat tool and plastic pry tools help for a clean job.
Does the touch still work after the replacement?
Yes. This is a full touch assembly, so the LCD, the 10-point capacitive digitizer, and the front glass come bonded together as one unit. After fitting, your Envy 13-ar responds to taps, swipes, and pinch-to-zoom exactly as it did before the damage. Windows recognises the touch layer automatically with no extra driver in most cases. Mascom International tests every corner and edge of the glass in the store before you leave, so you confirm the touch works across the whole 13.3-inch panel yourself.
How do I know if I need the 300-nit or 400-nit panel?
HP Envy 13-ar models shipped with two brightness levels: a 300-nit FHD IPS panel and a brighter 400-nit, 100% sRGB version. Both are 13.3-inch touch displays, but they are separate parts. The easiest check is the HP part number on your old screen or in HP's service manual for your exact model. Bring the laptop to Mascom International and we read the label and match it. If you are unsure, our team helps identify the right brightness so colours and light output match your original display.
How long does fitting take, and is there a warranty?
Fitting usually takes 30 to 60 minutes at our Nairobi CBD store, so many customers wait and collect the same visit. Mascom International backs the HP Envy 13-ar screen replacement with a 6-month warranty covering the panel and touch layer against manufacturing faults. That warranty does not cover fresh physical damage, cracks, or liquid spills after fitting. Keep your receipt, and our Kimathi Street service desk handles any claim directly. Book ahead on +254 708 852 521 during busy periods so a technician is ready when you arrive.
Do you deliver the screen outside Nairobi?
Yes. If your own technician handles the fitting, Mascom International ships the HP Envy 13-ar screen assembly to all 47 counties on pay-on-arrival terms, so you pay when the part reaches you. Nairobi, Mombasa, Kisumu, Nakuru, and Eldoret receive it within 1 business day. Outer counties including Turkana, Marsabit, Wajir, Mandera, Lamu, and Tana River take 2 to 3 business days. Confirm your exact Envy model with us first on WhatsApp so the shipped panel matches your laptop and avoids a wrong-part return.
Technical Specifications
Display Panel Specifications
- 13.3-inch diagonal FHD panel at 1920 x 1080 resolution gives sharp text and clear video on the Envy 13-ar.
- IPS technology holds accurate colour and wide viewing angles when you tilt the laptop or share the screen.
- Micro-edge, edge-to-edge glass matches the thin-bezel look of the original HP Envy 13-ar display.
- BrightView WLED backlight matches the original finish for a bright, even picture across the whole panel.
- Brightness of 300 or 400 nits depending on your original model; the 400-nit version also covers 100% sRGB.
- Standard 60Hz refresh rate handles everyday scrolling, streaming, and video calls without visible lag.
Touch and Glass Layer
- Bonded touch assembly combines LCD, digitizer, and front glass so one part restores both picture and touch.
- 10-point capacitive multitouch reads taps, swipes, and pinch gestures across the full 13.3-inch surface.
- Edge-to-edge glass sits flush with the frame, keeping the clean feel of the factory Envy screen.
- Windows detects the touch layer automatically after fitting, so most laptops need no extra driver setup.
- Every unit is tested corner to corner for touch accuracy and dead pixels before it leaves Mascom International.
- Replacing the bonded assembly avoids the glass-only repairs that often leave gaps or reduced touch response.
Compatibility and Fitment
- Designed for HP Envy 13-ar0xxx AMD Ryzen models from 2019 in the touchscreen configuration.
- Uses the 30-pin eDP connector found on these Envy touch panels, matching the original ribbon cable.
- Not automatically compatible with Envy 13-ah, 13-ad, 13-aq, or 13-ba, which use different assemblies.
- Match by HP part number on the old screen or model sticker before buying to avoid a wrong fit.
- Mascom International confirms the correct part from your laptop or a WhatsApp photo before any order or fitting.
- Non-touch Envy 13-ar models use a separate LCD-only panel; ask us for that version if needed.
Connector and Build
- 30-pin eDP ribbon plugs directly into the Envy 13-ar mainboard with no adapter required.
- WLED edge backlight keeps the panel thin and light, matching the slim profile of the original.
- Bezel and mounting frame come attached, so the assembly seats cleanly into the existing laptop lid.
- Adhesive tape holds the panel securely once fitted, with no need for permanent glue in most cases.
- New Grade-A panel construction reduces the light bleed and uneven backlight common on worn screens.
- The whole assembly weighs only a few hundred grams, keeping the repaired laptop as portable as before.
Installation and Fitting
- Mascom International fits the screen at our Kimathi Street workshop, usually within 30 to 60 minutes.
- Technicians open the lid, disconnect the old ribbon, remove the broken panel, and seat the new one.
- Touch response and picture are tested in front of you before the laptop is handed back.
- Same-visit collection is common, so many customers wait in-store rather than leaving the machine overnight.
- Technicians buying the part alone receive adhesive tape; heat and pry tools help for a tidy fit.
- Booking ahead on +254 708 852 521 during busy periods keeps a technician ready when you arrive.
Inclusions and Support
- One new HP Envy 13-ar 13.3-inch FHD IPS multitouch display assembly, tested before dispatch or fitting.
- Mounting adhesive tape for a secure fit into the existing laptop lid frame.
- Professional fitting at the Nairobi CBD store included in the KSh 20,500 price.
- 6-month Mascom International warranty card covering panel and touch faults under normal use.
- Direct support from our Kimathi Street service desk for fitment questions and warranty claims.
- Confirmation of your exact model and part number before purchase to keep the match correct.
What's Included
Your KSh 20,500 covers one new HP Envy 13-ar 13.3-inch FHD IPS multitouch display assembly, tested for dead pixels and touch accuracy before fitting. Fitting at the Nairobi CBD store is included, along with mounting adhesive tape and a 6-month Mascom International warranty card. If you order the part alone for shipping, you receive the tested assembly and adhesive, ready for your own technician. Every order is matched to your exact Envy model first so the panel fits and the touch works.
Warranty
The HP Envy 13-ar screen replacement carries a 6-month Mascom International warranty covering the display panel and touch layer against manufacturing faults under normal use. The warranty does not cover new cracks, physical impact, or liquid damage after fitting. Keep your receipt, and our Nairobi CBD service desk handles claims directly.
Where to Buy the HP Envy 13-ar Screen Replacement in Kenya
The HP Envy 13-ar screen replacement is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit our store Monday through Saturday, 9:00 AM to 7:00 PM, to have the panel fitted while you wait, or bring your laptop for a quick model check first.
Order or book through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
- WhatsApp: +254 708 852 521
If your own technician does the fitting, Mascom International ships the HP Envy 13-ar screen across all 47 Kenyan counties with pay-on-arrival delivery you pay only when the part reaches you. Nairobi, Mombasa, Kisumu, Nakuru, and Eldoret receive delivery within 1 business day. Outer counties including Turkana, Marsabit, Wajir, Mandera, Lamu, and Tana River receive delivery within 2 to 3 business days.
Mascom International backs this repair with a 6-month warranty on the panel and touch layer, handled directly from our Nairobi CBD service desk. Buyers across Kenya rely on Mascom International for correct parts, honest pricing, and clean fitting on every laptop screen we supply. Send your Envy model number on WhatsApp today and we confirm the exact match before you pay.
