The HP EliteBook 1030 G2 screen replacement is now in stock at Mascom International for KSh 18,500, covering the 13.3-inch FHD 1920 x 1080 IPS touch panel that uses the 30-pin eDP connector. Every HP EliteBook 1030 G2 screen replacement we stock is brand new and sealed, never salvaged from a stripped machine. Each HP EliteBook 1030 G2 screen replacement arrives as a bonded unit: the LCD and its touch digitizer are fused together, so one part brings back both picture and finger input. Collect it at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, or order it delivered anywhere in Kenya.
Kenyan buyers reach for this part after a familiar set of accidents. Lawyers working out of Milimani Law Courts drop the machine lid-first onto a corridor floor. Consultants in Upper Hill shut a pen inside the hinge. Students at Strathmore and USIU crack a corner during the matatu commute home. In each case the laptop still boots, the SSD is untouched, and only the HP EliteBook 1030 G2 screen replacement stands between a working convertible and a write-off. Field staff still running these seven-year-old EliteBooks tell us the same thing every week: the hardware underneath is fine, the glass is not.
Unlike other electronics retailers in Kenya, Mascom International confirms the connector before selling you anything. The HP EliteBook 1030 G2 shipped with three different panel versions, and two of them use a 40-pin socket that will not accept a 30-pin ribbon. Buyers consistently report that they already paid for one wrong screen online before walking into our shop. Bring the laptop in, or send a photo of the old panel's rear label over WhatsApp, and our bench verifies the part first. Fitting takes roughly 45 minutes at our Nairobi CBD counter. Pay-on-arrival delivery reaches all 47 counties if you would rather fit it yourself.
Common Questions About the HP EliteBook 1030 G2 screen replacement
Will this panel fit my machine, or must I check something first?
Check the connector count first. This part serves the 13.3-inch FHD 1920 x 1080 model with a 30-pin eDP ribbon socket, matching HP spare 917927-001 and panel codes B133HAN04.2 or N133HCE. It does not fit the 3840 x 2160 UHD version or the HP Sure View privacy version, both of which use 40 pins. Flip your lid open, look at the ribbon plug on the old panel, or bring the laptop to Kimathi Street and our bench counts the pins for you free of charge.
What is the real difference between the 30-pin and 40-pin versions?
Pin count controls how much data the ribbon carries. The 30-pin socket feeds a standard FHD touch panel at 60Hz. The 40-pin socket carries either the 3840 x 2160 UHD panel or the HP Sure View privacy panel, which needs extra lines to switch its viewing angle on demand. Forcing the wrong ribbon into the wrong socket bends pins and can damage the motherboard's display port.
Can Mascom International fit it, or is this a do-it-yourself part?
Our Nairobi CBD workshop fits it for you. The 1030 G2 lid opens from the bezel edge with plastic spudgers, and the panel is adhesive-bonded rather than screwed, so heat and patience matter more than tools. Most units are done inside 45 minutes while you wait. If you are outside Nairobi and confident with disassembly, order the part alone and follow HP's service guide. Our team walks self-fitters through the tricky bezel corners over WhatsApp at no extra cost.
My picture is fine but touch has died. Do I still need the whole assembly?
Yes, on this model. HP bonds the touch digitizer directly onto the LCD glass in the 1030 G2, so the two cannot be separated without cracking the panel. Attempting to peel and rebond the touch layer almost always ends with a ruined LCD and a second purchase. At Mascom International, we're seeing more customers arrive after a failed separation attempt elsewhere. Replacing the complete assembly costs less than that two-step gamble and restores both functions in one fitting.
The picture is dark but the backlight glows. What has actually failed?
That pattern usually points at the panel itself rather than the motherboard. A dim image with a visible glow when you shine a torch at the screen means the backlight is running but the LCD layer or its ribbon has failed. Cracked corners, pressure marks, and stuck pixel clusters confirm it. Our bench connects your board to a known-good panel before we sell you anything, so you never buy a screen to fix a fault that lives on the motherboard.
Is KSh 18,500 sensible, or should I just buy a different laptop?
Compare it against the machine's remaining value. A clean used 1030 G2 with a working display trades between KSh 45,000 and KSh 60,000 in Nairobi, so a KSh 18,500 panel returns roughly three times its cost in restored resale value. The i5-7300U and i7-7600U chips inside still handle Office, Zoom, and browser work fine. Replacing the display costs far less than a comparable convertible, and you keep your existing Windows licence, SSD, and stored data.
What backs the screen if it fails a few weeks after fitting?
A 6-month Mascom International warranty covers the panel against manufacturing defects, detailed in full below. That period covers the failure modes that show up early: backlight flicker, dead ribbon lines, and touch layer separation. Accidental cracks from a second drop are not covered, which is standard across the industry. Bring the laptop back to our Nairobi CBD service desk with your receipt and we handle the claim in-house rather than shipping it away for weeks.
How quickly can I get one outside Nairobi?
Same day inside Nairobi and its environs, next business day for every other major town. Buyers in Mombasa, Kisumu, Nakuru, Eldoret, Nyeri, Meru, Thika, Kakamega, and Kisii typically have the panel within one working day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days. You pay the rider on arrival, after checking the packaging. Send your old panel label on WhatsApp first so we dispatch the correct connector version straight away.
Technical Specifications
Panel Hardware and Picture Quality
- 13.3-inch diagonal LCD measuring 33.8cm, matching the original HP factory panel dimensions exactly.
- Native 1920 x 1080 FHD resolution at 166 pixels per inch keeps small legal and spreadsheet text readable.
- UWVA IPS technology holds colour accuracy at 85 degrees off-axis in every direction, useful in tablet mode.
- Typical brightness of 300 nits handles office lighting and shaded outdoor work at Kenyan noon.
- 72% colour gamut coverage suits document work, presentations, and light photo review rather than print-grade grading.
- 60Hz refresh rate with LED backlight, matching what the 1030 G2 motherboard drives natively.
Connector Standard and Model Compatibility
- 30-pin eDP ribbon connector with panel self-refresh support, the version fitted to non-privacy FHD units.
- Cross-references HP spare part 917927-001 and panel codes B133HAN04.2 and N133HCE.
- Not compatible with 40-pin sockets used by HP Sure View privacy panels or 3840 x 2160 UHD builds.
- Fits HP EliteBook x360 1030 G2 convertible chassis; confirm your service tag before ordering to avoid returns.
- Motherboard requires no BIOS change, driver install, or firmware flash after the swap is complete.
- Bring the machine to Kimathi Street and our bench confirms pin count in under five minutes.
Touch Layer and Glass Protection
- Capacitive multi-touch digitizer bonded to the LCD, registering ten simultaneous contact points under Windows.
- Corning Gorilla Glass front surface resists the scratches that keys and desk grit cause in laptop bags.
- Digitizer is factory-calibrated, so Windows recognises touch input immediately without a separate calibration routine.
- Pen input through capacitive styluses works normally; the 1030 G2 does not use an active digitizer layer.
- Bonded construction removes the air gap, cutting internal reflection when working near Nairobi office windows.
- Touch controller sits on the panel itself, so no separate control board purchase is required.
Build Dimensions and Fitment
- Ultra-slim 2.0mm panel thickness matches the original assembly so the lid still closes flush.
- Supplied without bezel, hinges, back cover, or LCD cable; your existing parts transfer across during fitting.
- 16:9 aspect ratio preserves the exact mounting bracket positions used by the factory panel.
- Adhesive-bonded mounting rather than screw-mounted, which is why controlled heat is needed on removal.
- Weight matches the original closely enough that hinge tension and lid balance stay unchanged.
- Edge sealing keeps out the fine dust that gets into machines on Thika Road and Mombasa Road.
Installation Requirements and Workshop Fitting
- Fitting takes roughly 45 minutes at our Nairobi CBD counter, including a full function test afterwards.
- Battery must be disconnected before the ribbon is unplugged, protecting the motherboard's display port from shorts.
- Plastic spudgers and a low-heat pad are required; metal tools crack the Gorilla Glass edge.
- Self-fitters should follow the HP EliteBook x360 1030 G2 Maintenance and Service Guide step sequence.
- Test the panel while it is still loose, before pressing the adhesive down permanently.
- Our team supports self-fitters over WhatsApp with photos and voice notes at no charge.
Testing, Sourcing, and Quality Standard
- Every panel is bench-tested on a live 1030 G2 board before it leaves our Kimathi Street counter.
- Sourced as new stock from established display suppliers, never harvested from scrapped or water-damaged laptops.
- Graded to ISO 13406-2 and ISO 9241 Class 1, the industry pixel standard used by HP.
- Under that standard, one to five isolated sub-pixel faults are not classed as a defect.
- Clustered pixel faults, backlight bleed, and touch failure are covered and replaced under our warranty.
- Serial-matched to your receipt at point of sale, which speeds up any later warranty claim.
Package Contents
- One brand new 13.3-inch FHD IPS LCD panel with the touch digitizer bonded on
- 30-pin eDP connector fitted to the panel, ready to seat in the 1030 G2 socket
- Anti-static protective packaging with corner padding for countrywide transit
- Mascom International receipt with the panel serial recorded for warranty tracking
Note:Your original bezel, hinges, back cover, LCD cable, and webcam module are reused during fitting. Installation tools and adhesive strips are not included in the boxed part; our workshop supplies both when we fit it for you.
Warranty
The HP EliteBook 1030 G2 screen replacement carries a 6-month Mascom International warranty on manufacturing defects, covering backlight failure, dead ribbon lines, clustered pixel faults, and touch layer separation under normal use. Accidental damage after fitting is excluded. Claims are handled directly at our Nairobi CBD service desk, with no shipping away and no third-party assessment queue.
Buying the HP EliteBook 1030 G2 screen replacement from Mascom International
Mascom International stocks this panel at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday between 9:00 AM and 7:00 PM with your laptop, and we confirm the connector, fit the panel, and test it in front of you before you pay.
Three ways to order:
- Call/WhatsApp +254 708 852 521
- Email info@mascomintl.com
- Order through www.mascomintl.com
Pay-on-arrival delivery reaches every Kenyan county. Nairobi and its environs receive the panel the same day. Mombasa, Kisumu, Nakuru, Eldoret, Nyeri, Meru, Thika, Kakamega, and all other major towns receive it within 1 business day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days. You inspect the packaging and pay only when it arrives.
Send a photo of your old panel's rear label on WhatsApp before ordering and our bench matches the connector for you. Buyers across Kenya rely on Mascom International for correct part identification, current Nairobi pricing, and repair support handled in our own workshop rather than passed along a chain of middlemen.
