The HP EliteBook 1030 G2 Screen Assembly is now in stock at Mascom International for KSh 25,000, supplying the entire top half of the machine rather than bare glass alone. Each HP EliteBook 1030 G2 Screen Assembly arrives brand new and sealed, carrying the 13.3-inch FHD 1920 x 1080 IPS touch surface already mounted inside its frame, with hinges, back cover, and display wiring attached. That turns six fiddly transfers into one bolt-on job. Collect the HP EliteBook 1030 G2 Screen Assembly at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, or have it delivered to any Kenyan county.
County government officers, NGO field staff posted to Turkana and Marsabit, and accountants chasing KRA filing deadlines make up most buyers for this part. Their machines rarely fail from age. They fail from a fall down office stairs, a bag crushed under a bus seat, or a hinge that finally tore its mounting posts out of the shell. Once the frame itself is twisted, a loose panel will never sit flat or close square. The HP EliteBook 1030 G2 Screen Assembly rebuilds the frame, the mounts, and the picture in a single fitting.
Unlike other electronics retailers in Kenya, Mascom International tests the part on a live 1030 G2 motherboard before it leaves the shop. Buyers throughout Kenya tell us the same story. They bought a loose panel online, then found that the twisted frame and snapped hinges still needed sourcing separately, adding three weeks and more money. At Mascom International, we're seeing that second purchase far too often. Bring the machine to Kimathi Street and we swap the HP EliteBook 1030 G2 Screen Assembly in about an hour while you watch. Pay-on-arrival delivery reaches all 47 counties for self-fitters.
Common Questions About the HP EliteBook 1030 G2 Screen Assembly
What comes in this assembly that a loose panel does not?
Everything above the keyboard deck. You receive the LCD with its touch layer bonded on, plus the front bezel, the aluminium back cover, both hinges with their mounting posts, and the display ribbon already routed through the left hinge channel. A loose panel gives you the picture only, leaving you to salvage a bent frame and worn hinges from the damaged unit. This route matters when the fall damaged the shell, not just the glass.
My hinges creak and the lid will not stay upright. Does this cure that?
Yes, provided the damage sits in the hinges themselves rather than the base chassis. The 1030 G2 uses dual 360-degree hinges anchored into plastic posts inside the lid. Those posts crack under repeated tablet-mode flipping, which is why the lid starts drooping or grinding. Fresh hinges and fresh posts arrive together in this part. If the mounting points on the keyboard base are also stripped, our bench will tell you before you buy anything.
Does the webcam still work after the changeover?
The webcam housing and its wiring come across in the new frame, so standard HD camera builds work immediately with no driver install. Machines fitted with the IR facial recognition module need that camera transferred from the damaged frame, a five-minute job our bench handles at no charge. Windows Hello sign-in behaves exactly as before once the module is seated. Confirm which camera your build carries by checking Device Manager, or simply bring the machine in.
Which resolution and ribbon version does this part carry?
It carries the 13.3-inch FHD 1920 x 1080 UWVA IPS touch version at 60Hz, the configuration fitted to the majority of 1030 G2 units sold into Kenya. HP also shipped a 3840 x 2160 UHD build and an HP Sure View privacy build, both using different ribbon counts. Send a photo of the sticker on the rear of your existing glass over WhatsApp and we match the version before dispatch, at zero cost.
What if my machine has the HP Sure View privacy display?
Tell us before ordering. Sure View builds carry an extra control layer that switches the viewing angle at the press of a function key, and they run on a 40-pin socket rather than 30 pins. Fitting a standard part to that machine costs you the privacy function. We stock the privacy version separately and quote it on request. Buyers in banking and legal work usually want the privacy layer retained, so it is worth checking your service tag first.
How long does the changeover take at your counter?
About an hour, including the function test afterwards. Most of that time goes into separating the base from the damaged frame, transferring the antenna wires that run up through the hinges, and reseating the ribbon without pinching it. Because the picture, frame, and hinges arrive as one piece, there is no adhesive heating or glass peeling involved, which is what makes bare-panel jobs slower. Walk in Monday through Saturday between 9:00 AM and 7:00 PM.
Does 360-degree rotation and tablet mode still behave normally afterwards?
Yes. The rotation sensor lives on the motherboard rather than in the lid, so tent, stand, and tablet modes switch automatically the moment Windows loads. Hinge tension is factory-set to match the original torque, meaning the lid holds any angle between flat and fully folded without sagging. Wi-Fi antenna wiring runs through the hinge channel and gets reconnected during fitting, so signal strength on your Safaricom or Airtel router stays unchanged.
Is KSh 25,000 justified against the price of the bare glass?
Compare the total repair bill, not the sticker. Our bare 1030 G2 panel sells at KSh 18,500, but a bent frame plus a pair of hinges bought separately typically adds KSh 9,000 to KSh 12,000 and a two-week wait for stock. This route closes the gap for KSh 6,500 more and lands in one delivery. A clean used 1030 G2 trades between KSh 45,000 and KSh 60,000 in Nairobi, so the maths still favours repair.
How do buyers in Kisumu, Mombasa, or Eldoret order this?
Send your service tag and a photo of the damage on WhatsApp, and we confirm the correct version the same morning. Nairobi and its environs receive it the same day. Kisumu, Mombasa, Eldoret, Nakuru, Nyeri, Meru, Thika, Kakamega, and every other major town receive it within 1 business day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days. You inspect the packaging and pay the rider on arrival.
Technical Specifications
Display Hardware and Picture Output
- 13.3-inch diagonal LCD measuring 33.8cm, matching the factory footprint so the shell closes square.
- Native 1920 x 1080 FHD resolution at 166 pixels per inch, keeping audit spreadsheets and PDF contracts legible.
- UWVA IPS construction holds colour steady at 85 degrees off-axis in all four directions, useful in tent mode.
- Typical brightness of 300 nits copes with lit offices and shaded verandas, though direct equatorial sun still washes it.
- 800:1 contrast ratio at 60Hz refresh, matching what the 1030 G2 graphics chip drives natively.
- LED backlight rated for roughly 15,000 hours of use, around seven working years at eight hours daily.
Complete Lid Structure and Hinge Mechanism
- Aluminium back cover supplied pre-fitted, replacing shells dented by drops, bag pressure, or crushed corners.
- Dual 360-degree hinges arrive attached with fresh mounting posts, curing droop, grinding, and lid sag.
- Front bezel included with clean adhesive channels, so no cracked plastic transfers from the damaged shell.
- Hinge torque is factory-set, letting the lid hold laptop, tent, stand, and tablet positions without slipping.
- Antenna routing channels sit ready inside the hinge covers, so Wi-Fi wires reseat without pinching.
- Internal magnet placement matches the original, keeping the lid-closed sleep trigger working correctly.
Touch Layer and Surface Protection
- Capacitive digitizer bonded onto the LCD, registering ten simultaneous contact points under Windows 10 and 11.
- Corning Gorilla Glass front face resists the scratches that keys, coins, and desk grit cause inside bags.
- Factory calibration means Windows recognises finger input straight away, with no separate calibration routine required.
- Bonded construction removes the internal air gap, cutting reflection when working beside bright office windows.
- Capacitive stylus input works normally; the 1030 G2 uses no active pen layer, so pressure sensitivity does not apply.
- Touch controller sits on the part itself, so no separate control board purchase is needed.
Connector Standard and Model Compatibility
- Ships with the 30-pin eDP ribbon fitted to standard non-privacy FHD units, pre-routed through the hinge.
- Cross-references HP spare 917927-001 and glass codes B133HAN04.2 and N133HCE for identification purposes.
- Does not fit 3840 x 2160 UHD builds or HP Sure View privacy builds, both of which use 40 pins.
- Suits the HP EliteBook x360 1030 G2 convertible chassis only; the 1030 G3 uses a different frame shape.
- No BIOS update, firmware flash, or driver install is needed after fitting, so Windows boots straight through.
Fitting Process and Workshop Turnaround
- Roughly one hour at our Kimathi Street bench, including a full picture, touch, camera, and Wi-Fi test.
- Battery must be unplugged before the ribbon is released, protecting the motherboard display port from shorts.
- Plastic spudgers and a T5 driver are the only tools required; metal levers chip the Gorilla Glass edge.
- Self-fitters should follow the HP EliteBook x360 1030 G2 Maintenance and Service Guide sequence exactly.
- Test the picture and touch before tightening the final hinge screws, while the wiring is still accessible.
- Our team supports self-fitters over WhatsApp using photos and voice notes, charged at nothing.
Sourcing, Testing, and Quality Grading
- Every unit is powered up on a live 1030 G2 motherboard before it leaves our Nairobi CBD shop.
- Sourced as new stock through established display suppliers, never stripped from scrapped or water-damaged machines.
- Graded to ISO 13406-2 and ISO 9241 Class 1, the same pixel standard HP applies at manufacture.
- Under that standard, one to five isolated sub-pixel faults are not classed as a fault.
- Clustered pixel defects, backlight bleed, hinge failure, and touch dropouts are covered and replaced.
- Serial numbers are recorded against your receipt at point of sale, which shortens any later claim.
Package Contents
- One HP EliteBook 1030 G2 Screen Assembly, brand new and sealed, with glass, touch layer, bezel, and back cover pre-fitted
- Both 360-degree hinges attached, complete with mounting posts and hinge covers
- 30-pin eDP display ribbon pre-routed through the hinge channel
- Webcam housing fitted, ready to receive an IR module if your build carries one
- Anti-static wrapping with moulded corner padding for countrywide transit
- Mascom International receipt with the serial recorded for warranty tracking
Note:Fitting tools and replacement adhesive strips are not boxed with the part. Our bench supplies both when we fit it for you.
Warranty
The HP EliteBook 1030 G2 Screen Assembly carries a 6-month Mascom International warranty on manufacturing defects, covering backlight failure, dead ribbon lines, clustered pixel faults, touch dropouts, and hinge mechanism failure under normal use. Accidental damage after fitting sits outside cover. Claims are settled directly at our Nairobi CBD service desk, with no shipping away and no third-party assessment queue.
Where to Buy the HP EliteBook 1030 G2 Screen Assembly in Kenya
The HP EliteBook 1030 G2 Screen Assembly is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, with the damaged machine, and we confirm the version, fit the part, and test picture, touch, camera, and Wi-Fi in front of you before you pay.
Order through any of the following:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships this part across all 47 Kenyan counties with pay-on-arrival delivery, so you settle the bill only once it reaches you. Nairobi and its environs receive same-day delivery. All other major cities and towns, including Mombasa, Kisumu, Nakuru, Eldoret, Nyeri, and Kakamega, receive next-business-day delivery. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Every unit ships backed by the 6-month Mascom warranty above, with claims coordinated at our Nairobi CBD service desk.
Send your service tag on WhatsApp before ordering and our bench matches the correct version for you. Buyers from Kisii to Garissa rely on Mascom International for honest part identification, current Kenyan pricing, and repair work carried out in our own shop rather than passed down a chain of middlemen.
