The CUDY GS1028PS2 24-Port Gigabit PoE Switch is now available at Mascom International for KSh 25,500 at our Nairobi CBD store on Kimathi Street. This unmanaged switch carries 24 Gigabit PoE+ ports, 2 Gigabit SFP fiber uplink slots, and a 300W total power budget that feeds up to 30W to each connected device. Switching capacity reaches 52 Gbps with a 38.68 Mpps forwarding rate. The CUDY GS1028PS2 mounts in a standard 19-inch rack or sits flat on a desk. Buy it today from Mascom International at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD.
The CUDY GS1028PS2 is built for CCTV installers, IT administrators, and small internet service providers running IP cameras, VoIP phones, and Wi-Fi access points across Kenya. Running a separate power line to every rooftop camera or ceiling access point costs money and creates cable clutter. PoE solves that problem by sending data and electricity down a single network cable. One CUDY GS1028PS2 can power an entire floor of cameras in a Westlands office block, a hotel in Diani, or a school computer lab, with no wall adapter needed at each device.
At Mascom International, we're seeing security installers, retail chains, and SACCOs across Nairobi switch to PoE to cut installation labour. The CUDY GS1028PS2 handles that shift at a price most 24-port PoE switches in Kenya cannot match. Unlike other electronics retailers in Kenya, Mascom International lets you test the switch in person before you buy and pay only when it reaches your site. Users consistently report that the metal chassis runs cool and quiet in a wall-mounted rack. Visit our Kimathi Street store or order the CUDY GS1028PS2 for pay-on-arrival delivery countrywide.
Common Questions About the CUDY GS1028PS2
What can the CUDY GS1028PS2 power over its PoE ports?
Every one of the 24 Gigabit ports on the CUDY GS1028PS2 supplies PoE. Each port delivers up to 30W under the IEEE 802.3af and 802.3at standards. That covers IP security cameras, VoIP desk phones, wireless access points, and PTZ dome cameras that pan and tilt. The device draws both its data connection and its power from one Ethernet cable, so there is no need for a plug socket beside each camera or phone. Older 802.3af devices that need less power also connect and run without any manual setting.
How many devices can the 300W budget actually run?
The CUDY GS1028PS2 shares a 300W total PoE budget across all connected devices. A typical IP bullet camera pulls 4W to 7W, so the switch comfortably powers around 30 to 40 standard cameras at once. Higher-draw PTZ cameras or dual-band access points use more, which lowers the count. When total demand nears the 300W ceiling, priority-based power management keeps the lower-numbered ports supplied first and protects the switch from overload. This lets you plan a full CCTV floor around one unit.
Is the CUDY GS1028PS2 a good choice for a CCTV camera system?
Yes. The CUDY GS1028PS2 was made with surveillance in mind. Its VLAN isolation mode separates camera traffic so each device talks only to the uplink, which stops one infected camera from reaching the rest of the network. The 250-metre Extend mode reaches distant gate cameras and perimeter posts that sit beyond the normal 100-metre cable limit. Security firms wiring compounds in Karen, Runda, and Industrial Area use this range daily. The 2 SFP slots take fibre modules for long uplinks back to the recording room.
Does the CUDY GS1028PS2 need configuration, or is it plug-and-play?
The CUDY GS1028PS2 is an unmanaged switch, so it works the moment you plug it in. There is no web login, no IP address to set, and no software to install. Power on the unit, connect your cameras or phones, link the uplink to your router, and traffic flows. The VLAN and Extend modes switch on through physical DIP settings on the unit rather than a config page. This suits installers who want a fast, no-fuss deployment in offices, shops, and schools across Kenya.
What do the VLAN and Extend modes do on this switch?
The CUDY GS1028PS2 runs three modes: Default, VLAN, and Extend. Default mode passes all traffic normally for standard office networks. VLAN mode isolates each PoE port from the others so devices cannot see each other, which raises security on camera and public Wi-Fi networks. Extend mode stretches ports 17 to 24 to a 250-metre reach at 10 Mbps, useful for far gate cameras. A built-in watchdog checks each Extend-mode link and restarts a port on its own if a connected device stops responding.
How far can the CUDY GS1028PS2 send data and power over one cable?
Standard Gigabit runs reach 100 metres on Cat 5e or better cable, matching every wired network in a normal building. When you switch ports 17 to 24 into Extend mode, those eight ports reach 250 metres at 10 Mbps. That extra distance matters for a warehouse on Mombasa Road, a school field camera, or a boundary post on a Naivasha farm. For runs beyond copper range, the 2 SFP slots accept fibre modules that carry traffic over kilometres back to your core switch or recording server.
Is the CUDY GS1028PS2 worth KSh 25,500 in Kenya's market?
For a 24-port Gigabit switch that powers every port, KSh 25,500 sits well below most rival units of the same size and PoE budget. Buying 24 separate PoE injectors would cost more and clutter the rack. Field engineers covering Nakuru, Eldoret, and Kisumu deployments choose it because one box replaces a wall of adapters. Mascom International backs the price with a 12-month warranty and a physical service desk in Nairobi CBD, so support is a walk-in away rather than a foreign call centre.
What networks and devices is the CUDY GS1028PS2 compatible with?
The CUDY GS1028PS2 works with any wired Ethernet network and any router from Safaricom, JTL Faiba, Zuku, or a private ISP. Its PoE ports follow the 802.3af and 802.3at standards, so any camera, phone, or access point that lists those standards will draw power correctly. The 2 SFP slots take standard 1.25G fibre modules. The switch runs on ordinary 100-240V mains power, matching Kenya's 240V supply, and its surge protection guards against the power spikes common on the national grid.
Technical Specifications
Port Layout and PoE Power Delivery
- 24 Gigabit RJ45 ports, and every port supplies PoE for cameras, phones, and access points
- Up to 30W of power on each port for higher-draw PTZ cameras and dual-band access points
- 300W total PoE budget shared across all ports, enough for a full floor of devices
- IEEE 802.3af and 802.3at support covers both low-power and higher-power PoE hardware
- Priority-based power management keeps key ports live if total demand nears the budget ceiling
- 2 SFP fibre uplink slots handle long-distance links to a core switch or recording room
Switching Speed and Data Capacity
- 52 Gbps switching capacity moves traffic between all ports without a bottleneck
- 38.68 Mpps forwarding rate handles heavy camera and file-transfer loads at once
- 8192-entry MAC address table tracks large numbers of connected devices cleanly
- Full Gigabit speed on every RJ45 port for fast local file sharing and NVR recording
- 802.3x flow control smooths traffic bursts so no packets drop under load
- Non-blocking design lets many cameras stream to a recorder at full frame rate
Network Modes and Traffic Segmentation
- Default mode passes all traffic for a standard office or home network setup
- VLAN mode isolates each PoE port so a compromised device cannot reach the others
- Extend mode stretches ports 17 to 24 to 250 metres at 10 Mbps for distant cameras
- Built-in watchdog restarts a stalled Extend-mode port on its own with no staff action
- Mode switching happens on the unit itself, so no login or software is needed
- Port isolation raises security on public Wi-Fi and guest camera networks
Chassis Build and Cooling
- Metal casing resists knocks and spreads heat for steady all-day running in a rack
- Standard 440mm width fits any 19-inch server or comms rack across Kenyan offices
- Quiet cooling keeps noise low enough for an open office or a small shop counter
- 44mm one-unit height saves rack space where cabinet room is tight
- Weighs 2.9kg, light enough for a single installer to mount on wall brackets
- Desktop or rackmount install with the bundled bracket kit suits any site layout
Electrical Input and Surge Protection
- Runs on 100-240V at 50/60Hz, a direct match for Kenya's 240V mains supply
- Internal 300W power supply removes the need for a separate external power brick
- Draws only 10W for its own operation before any PoE load is added
- Level 4 surge protection guards against the voltage spikes common on the grid
- Three-prong grounded plug adds a safety path against electrical faults
- Wide voltage range keeps the switch stable through minor mains fluctuations
Deployment and Device Compatibility
- Works with routers from Safaricom, Faiba, Zuku, and any private ISP out of the box
- Pairs with IP cameras, NVRs, VoIP phones, and Wi-Fi access points from any brand
- 100-metre standard cable reach on Cat 5e covers a full building floor
- SFP slots accept common 1.25G fibre modules for links between separate blocks
- Operating range of 0 to 40 degrees Celsius suits both coastal and inland Kenyan sites
- Plug-and-play setup needs no technical training for a basic office install
What's in the Box
The CUDY GS1028PS2 retail package includes the 24-port PoE switch unit, a power cord for Kenya's mains supply, a rack mounting kit with brackets and screws for 19-inch cabinet installation, and a printed installation guide. Mascom International confirms the box contents before dispatch. For fibre uplinks, standard 1.25G SFP modules are sold separately at our Kimathi Street store, and our team can recommend the right module for your cable run and distance.
Warranty
The CUDY GS1028PS2 ships with a 12-month warranty through Mascom International, covering manufacturing defects under normal use. Our Nairobi CBD service desk handles any warranty claim directly, so you deal with a local team on Kimathi Street rather than a distant support line. Customers across Kenya rely on our after-sales backing for networking hardware.
Where to Buy the CUDY GS1028PS2 in Kenya
The CUDY GS1028PS2 24-Port Gigabit PoE Switch is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, to inspect the switch and test its ports before purchase. The unit ships in a standard black metal rackmount chassis.
Order through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the CUDY GS1028PS2 across all 47 Kenyan counties with pay-on-arrival delivery, so you pay only when the switch reaches you. Nairobi, Mombasa, Kisumu, Nakuru, and Eldoret receive next-business-day delivery. Outer counties including Lodwar, Wajir, Mandera, and Marsabit receive the switch within 2 to 3 business days.
Our Nairobi CBD service desk handles after-sales support directly. Buyers across Kenya rely on Mascom International for honest specifications, current market pricing, and dependable warranty backing on every PoE switch, router, and networking unit we stock. Reach us on +254 708 852 521, info@mascomintl.com, or www.mascomintl.com to place your order today.
