New DAHUA PFS3206-4P-96 4-Port Hi-PoE Switch is now available at Mascom International for KSh 10,000, in stock at our Nairobi CBD store. This unmanaged two-layer switch carries four PoE copper ports and two 1000 Base-X SFP fiber slots, pushing up to 96W of total PoE output. Port 4 alone delivers up to 60W under the Hi-PoE standard, while ports 1, 2, and 3 each supply up to 30W. You will find it at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, ready for same-day pickup or countrywide delivery.
The DAHUA PFS3206-4P-96 suits CCTV installers, security integrators, retail shop owners, school IT staff, and property managers running camera networks across Kenya. One Ethernet cable carries both data and power to each IP camera, so you skip the separate power socket beside every camera mount. A single switch handles a four-camera setup at a shop in Nairobi CBD, an apartment block in Kilimani, or a warehouse along Mombasa Road. The two SFP fiber ports let you cascade switches over long distances where copper cabling cannot reach.
Mascom International stocks the PFS3206-4P-96 with pay-on-arrival delivery, so you inspect the switch before you pay a single shilling. Unlike traditional electronics retailers in Kenya, we ship to all 47 counties and back every unit with direct after-sales support from our Nairobi CBD desk. Installers across Nairobi, Mombasa, Kisumu, and Nakuru order this switch from us for camera jobs that need clean power and surge protection. Walk into our store to test the DAHUA PFS3206-4P-96 in person before you commit to a purchase.
Common Questions About the DAHUA PFS3206-4P-96 4-Port Hi-PoE Switch
What is the DAHUA PFS3206-4P-96 used for?
The DAHUA PFS3206-4P-96 powers and connects up to four IP devices over standard network cable. It is built for IP camera installations, but it also runs wireless access points, IP phones, and access-control readers. Each PoE port sends data and electricity down one cable, removing the need for a wall socket at every camera point. CCTV installers in Kenya use it for small to mid-size jobs covering shops, offices, schools, and residential gates where four cameras plus a fiber uplink cover the site.
How many devices can the PFS3206-4P-96 connect at once?
The switch carries six ports in total: four PoE copper ports and two SFP fiber slots. Three copper ports run at 10/100 Mbps and supply up to 30W each, while the fourth runs at full Gigabit speed and supplies up to 60W for higher-draw cameras like PTZ units. The two 1000 Base-X SFP ports handle fiber uplinks or cascading to another switch. This layout supports four powered cameras plus long-distance fiber backhaul on a single compact unit.
How much PoE power does the DAHUA PFS3206-4P-96 supply?
Total PoE budget reaches 96W across all four powered ports combined. Port 4 alone supplies up to 60W under the Hi-PoE standard, suiting pan-tilt-zoom cameras, heaters, and infrared illuminators that pull heavy current. Ports 1, 2, and 3 each supply up to 30W, covering standard fixed dome and bullet cameras. The switch follows IEEE802.3af, IEEE802.3at, and Hi-PoE protocols, so it works with most PoE cameras and access points sold in Kenya today.
Does the PFS3206-4P-96 work with non-Dahua cameras?
Yes. The PFS3206-4P-96 follows open IEEE802.3af and IEEE802.3at PoE standards, so it powers cameras and devices from Hikvision, TP-Link, Uniview, Axis, and other brands, not only Dahua units. As an unmanaged switch, it needs no configuration: you plug devices in and it works. This plug-and-play behavior makes it a practical choice for installers in Kenya who mix camera brands across a single site or service older systems with newer hardware.
How far can the PFS3206-4P-96 send data over fiber?
The two 1000 Base-X SFP slots accept fiber transceivers for long-distance links between buildings or floors. Paired with a Dahua PFT3950 multi-mode module, the switch reaches up to 500 metres over multi-mode fiber, far beyond the 100-metre copper limit. This lets you cascade multiple switches across a school compound in Nairobi, a logistics yard on Mombasa Road, or a multi-block estate where a single copper run would never stretch the full distance.
Is the DAHUA PFS3206-4P-96 protected against power surges?
Yes. The switch carries 4KV common-mode and 2KV differential-mode lightning protection on its ports, guarding connected cameras against voltage spikes. Kenya's frequent storms and unstable grid power make surge protection a real concern for outdoor camera runs. The wide working temperature range of -30°C to 65°C also lets the unit sit in hot ceiling voids, unventilated cabinets, or coastal humidity in Mombasa and Diani without overheating or shutting down during long deployments.
What is the difference between managed and unmanaged switches?
An unmanaged switch like the PFS3206-4P-96 works straight out of the box with no setup, no login, and no software. A managed switch requires configuration of VLANs, port settings, and monitoring through a web interface. For most small CCTV jobs in Kenya, an unmanaged switch is the right tool: it costs less, installs in minutes, and needs zero technical maintenance. Buyers who need traffic control or remote monitoring across large networks should look at a managed model instead.
Is the DAHUA PFS3206-4P-96 worth KSh 10,000 in Kenya's market?
At KSh 10,000, the PFS3206-4P-96 covers a complete four-camera site with fiber uplink capacity built in, which separate power supplies and copper-only switches cannot match at this price. The 96W budget and 60W Hi-PoE port handle demanding cameras that cheaper switches starve. Installers across Kenya report fewer site callbacks because one cable per camera means fewer failure points. For a switch that powers, connects, and protects an entire small camera system, it pays for itself on a single job.
Technical Specifications
Port Layout and Connection Options
- Three 10/100 Base-T copper ports handle standard fixed cameras at fast Ethernet speed for everyday CCTV coverage
- One 10/100/1000 Base-T Gigabit port runs the highest-bandwidth camera or PTZ unit without traffic bottlenecks
- Two 1000 Base-X SFP fiber slots accept transceivers for long-distance uplinks between separate buildings
- Six total ports fit a four-camera site plus dual fiber backhaul in one compact housing
- Auto-sensing ports detect device speed automatically, so no manual port configuration is ever required
- SFP cascading links several switches together to extend a camera network across a large compound
PoE Power Distribution
- Total PoE budget of 96W spreads across all four powered copper ports for multi-camera sites
- Port 4 supplies up to 60W under Hi-PoE for power-hungry PTZ cameras, heaters, and infrared illuminators
- Ports 1, 2, and 3 each supply up to 30W, covering standard dome and bullet cameras comfortably
- IEEE802.3af and IEEE802.3at compliance powers cameras and access points from most major brands
- Single-cable power and data removes the need for a wall socket beside each camera mount
- DC48 to 57V input range keeps power delivery steady across connected devices during operation
Switching Throughput and Data Handling
- Switching capacity of 6.8 Gbps moves camera video streams without lag across all ports at once
- Packet forwarding rate of 4.91 Mpps keeps recorded footage smooth even under heavy simultaneous load
- MAC address table holds up to 8,000 entries, tracking every connected device on the network automatically
- MAC auto-learning and aging manage device addresses without any setup from the installer
- Flow control runs on by default, preventing data loss when traffic spikes across busy ports
- 1Mb packet buffer memory holds data briefly during congestion so frames are not dropped
Surge Protection and Temperature Tolerance
- 4KV common-mode lightning protection shields ports from voltage spikes during Kenya's frequent storms
- 2KV differential-mode protection guards connected cameras against damaging power surges on the line
- Working temperature range of -30°C to 65°C suits hot ceiling voids and unventilated metal cabinets
- Humidity tolerance from 10% to 90% holds up in coastal Mombasa and Diani installation sites
- Industrial wide-temperature build keeps the switch stable in outdoor enclosures year-round
- Fanless operation means no moving parts to fail and silent running in occupied office spaces
Housing and Mounting Format
- Compact 150mm by 100mm by 30mm body fits inside small wall boxes and camera cabinets
- Light 480g weight mounts easily on a wall bracket, DIN rail, or shelf without heavy support
- Two-layer Layer 2 switching handles all local camera traffic without routing complexity
- Metal housing resists dust and knocks in active installation environments across job sites
- Slim 28mm slide width fits tight DIN-rail rows alongside other security cabinet hardware
- Unmanaged format needs no cooling fan, no console port, and no firmware updates to run
Package Contents
- DAHUA PFS3206-4P-96 4-Port Hi-PoE Switch unit
- Power adapter (DC48 to 57V supply)
- Mounting accessories
- Quick start guide and documentation
Warranty
The DAHUA PFS3206-4P-96 carries a 12-month Mascom International warranty covering manufacturing defects under normal use. Our Nairobi CBD service desk handles any warranty claims directly, with replacement units stocked locally so installers face no long downtime on active camera jobs.
Where to Buy the DAHUA PFS3206-4P-96 in Kenya
DAHUA PFS3206-4P-96 4-Port Hi-PoE Switch is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit our store Monday through Saturday, 9:00 AM to 7:00 PM, to test the PFS3206-4P-96 in person before purchase.
Order through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the PFS3206-4P-96 across all 47 Kenyan counties with pay-on-arrival delivery you only pay when the switch reaches you. Nairobi, Mombasa, Kisumu, Nakuru, and Eldoret receive next-business-day delivery. Outer counties including Lodwar, Wajir, Mandera, and Marsabit receive delivery within 2-3 business days.
Buyers across Kenya rely on Mascom International for honest specifications, current market pricing, and direct after-sales backing on every PoE switch we stock. Our Nairobi CBD service desk supports installers and businesses nationwide long after the sale.
