The Dahua CS4006-4ET2GT-36 6-Port Cloud Managed Desktop Switch is now available at Mascom International for KSh 5,000, in stock at our Nairobi CBD store on the first floor of the Old Mutual Building, Room 4, Kimathi Street. This Layer 2 unit carries four 10/100 Mbps PoE ports plus two 10/100/1000 Mbps Gigabit uplink ports. The total PoE budget reaches 36W across the four powered ports, with up to 30W available on a single port. The Dahua CS4006-4ET2GT-36 supports IEEE 802.3af and 802.3at devices and runs cloud control through the DoLynk Care app.
Built for CCTV installers, small office owners, retail shops, hotels, and cafes across Kenya, the Dahua CS4006-4ET2GT-36 powers and connects up to four IP cameras, access points, or VoIP phones from a single compact box. Most small installations struggle with tangled separate PoE injectors and no easy way to restart a frozen camera. This switch removes that problem. The built-in PoE Watchdog watches each port, detects a camera that has stopped responding, and reboots that port on its own. Installers covering Nairobi, Nakuru, Eldoret, and Kisumu sites cut down repeat service visits.
Unlike basic unmanaged switches sold by most electronics retailers in Kenya, the Dahua CS4006-4ET2GT-36 lets you flip between managed and unmanaged modes with one DIP switch. The DoLynk Care platform shows real-time port status, power draw per port, and network topology on your phone, even over a 4G line with no static IP. Installers across Kenya tell us the remote reboot feature alone pays for the unit on the first avoided site trip. Visit Mascom International to see the Dahua CS4006-4ET2GT-36 before you buy, or order for pay-on-arrival delivery to any county.
Common Questions About the Dahua CS4006-4ET2GT-36 Desktop Switch
What does the Dahua CS4006-4ET2GT-36 do?
The Dahua CS4006-4ET2GT-36 is a 6-port Layer 2 desktop switch that powers and links network devices over Ethernet cable. Four ports carry both data and PoE power at up to 30W each, feeding IP cameras, wireless access points, and VoIP phones directly. Two Gigabit uplink ports connect the switch to an NVR, router, or main network at full 1000 Mbps. The total power pool across the four PoE ports sits at 36W. One cable per device handles power and data together, so you skip separate plug adapters at each camera.
How many cameras can the 36W PoE budget support?
The 36W total budget comfortably runs four standard IP cameras drawing roughly 8W each, with headroom to spare. A typical 2MP or 4MP Dahua or Hikvision camera pulls 5W to 8W, so four units fit inside the 36W pool. If you add an 8MP camera with infrared night vision that draws more, plan for three powered devices instead of four. Each port supplies up to 30W on its own, so one high-draw device like a pan-tilt-zoom camera or an access point works without trouble.
How does cloud management on the Dahua CS4006-4ET2GT-36 work?
Cloud control runs through Dahua's DoLynk Care app, free on Android and iOS. You scan the switch, add it to your account, and view every port from your phone anywhere with internet. The dashboard shows which ports draw power, real-time bandwidth per port, and a visual map of connected devices. You can set up VLANs to separate guest Wi-Fi from cameras, enable loop protection, and update firmware remotely. It works over a 4G connection without needing a fixed public IP address, which suits Kenyan sites on mobile broadband.
What is the PoE Watchdog feature?
The PoE Watchdog monitors each PoE port and checks whether the connected camera still responds. When a camera freezes or stops sending data, the switch cuts power to that single port for a moment and powers it back on, forcing the camera to restart. This happens automatically with no one on site. For installers managing CCTV across Mombasa, Thika, and Machakos, a frozen camera no longer means a physical trip. You can also trigger a manual port reboot from the DoLynk app on your phone.
Does the Dahua CS4006-4ET2GT-36 work with other camera brands?
Yes. The switch follows the open IEEE 802.3af and 802.3at PoE standards, so it powers any compliant device regardless of brand. It runs Dahua, Hikvision, Axis, Uniview, and other standard cameras, plus VoIP phones and Wi-Fi access points from any maker. You are not locked into one camera brand. The two Gigabit uplink ports also accept any standard router or NVR, so the switch fits into a mixed-brand setup already running in an office or shop.
How far can the Dahua CS4006-4ET2GT-36 send PoE power?
The Long Distance PoE mode pushes power and data up to 250 metres on a single Ethernet run, far beyond the usual 100-metre limit. This reaches a gate camera at the end of a long driveway or a perimeter camera across a compound without extra equipment. The trade-off is that data speed on that port drops to 10 Mbps in long-distance mode, which is plenty for a single camera feed. For shorter runs under 100 metres, ports operate at full speed.
Is the Dahua CS4006-4ET2GT-36 worth KSh 5,000?
At KSh 5,000, this switch sits at an entry price for a unit that adds cloud control and per-port reboot to a four-camera setup. A plain unmanaged PoE switch costs less but gives you no remote view, no per-port power data, and no way to restart a stuck camera off site. One avoided service trip across Nairobi traffic often costs more in time and transport than the switch itself. For installers and small business owners, the remote management saves repeat visits and keeps cameras online.
Does the Dahua CS4006-4ET2GT-36 need a separate power supply?
No. The switch ships with its own external power adapter rated at 53 VDC, 0.8 A, included in the box. You plug the adapter into a wall socket and connect it to the switch. Unlike larger rack switches that draw mains power directly, this desktop model uses the bundled adapter. Idle power draw stays under 3W, and full load with every PoE port working tops out near 42.4W, so running costs on your KPLC bill stay low for round-the-clock operation.
Technical Specifications
Port Configuration and Switching
- Four RJ45 ports run 10/100 Mbps with PoE for cameras, phones, and access points on single cables
- Two RJ45 uplink ports run 10/100/1000 Mbps Gigabit speeds to connect NVRs, routers, or the main network
- Switching capacity of 4.8 Gbps moves traffic between all six ports without bottlenecks under normal loads
- Packet forwarding rate of 3.57 Mpps handles multiple camera streams flowing to a recorder at once
- MAC address table holds 2,000 entries, enough to track every device on a small office or shop network
- Jumbo frame support up to 9,216 bytes lets large data packets pass for efficient video transfer
Power over Ethernet Delivery
- Total PoE budget of 36W spreads across the four powered ports for typical four-camera installations
- Each port supplies up to 30W, enough for a single high-draw pan-tilt-zoom camera or outdoor access point
- Follows IEEE 802.3af and 802.3at standards, powering any compliant camera, phone, or wireless unit
- Long Distance PoE mode reaches 250 metres on one cable for gate and perimeter cameras far from the switch
- PoE Watchdog detects a frozen camera and reboots that single port on its own to restore the feed
- Idle draw stays under 3W while full PoE load peaks near 42.4W, keeping electricity costs low for 24/7 use
Cloud Management and Software
- DoLynk Care app on Android and iOS shows port status, power use, and bandwidth from your phone anywhere
- Visual topology map displays every connected device so you spot a fault location at a glance
- VLAN support for up to 32 networks separates guest Wi-Fi from camera traffic for tighter control
- Loop protection stops broadcast storms that can crash a network when a cable is wrongly plugged
- Works over 4G mobile internet with no static public IP needed, suiting sites on Safaricom or Airtel broadband
- Remote firmware updates and per-port reboot run from the app, cutting physical visits to the site
Build and Protection
- Fanless metal housing runs silently with no moving parts, suited to a shop counter or reception desk
- Surge protection rated at 6 kV guards ports against power spikes during Kenya's rainy-season lightning
- Anti-static protection of 8 kV shields the unit from electrostatic damage during handling and installation
- Operating range of -10°C to +55°C covers hot Mombasa rooms and cooler highland sites in Nyeri or Limuru
- MTBF rating of 232.62 years signals a long service life for round-the-clock CCTV and office duty
- Compact desktop size sits on a shelf or mounts on a wall, fitting tight spaces in small premises
Mode and Configuration
- Single DIP switch flips between managed and unmanaged modes for installers who want plug-and-play setup
- Unmanaged mode powers cameras straight out of the box with no configuration for the simplest jobs
- Managed mode unlocks VLANs, loop protection, and cloud monitoring for setups needing tighter control
- Local web interface offers configuration on a laptop without the cloud app for offline network setup
- Real-time per-port power readout helps you balance the 36W budget across connected cameras
- Storage range of -40°C to +70°C lets the unit ride out shipping and warehouse heat before installation
Package Contents
Every Dahua CS4006-4ET2GT-36 from Mascom International ships with the switch unit, the 53 VDC external power adapter, the power cord, wall-mounting screws and accessories, and the quick start guide with warranty documentation. Mascom International supplies genuine Dahua stock, not grey imports.
Warranty
The Dahua CS4006-4ET2GT-36 carries a 12-month warranty through Mascom International, covering manufacturing defects under normal use. Our Nairobi CBD service desk handles any warranty claims directly, with replacement or repair on verified hardware faults.
Where to Buy the Dahua CS4006-4ET2GT-36 in Kenya
The Dahua CS4006-4ET2GT-36 is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit our store Monday through Saturday, 9:00 AM to 7:00 PM, to test the Dahua CS4006-4ET2GT-36 in person before purchase.
Order through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the Dahua CS4006-4ET2GT-36 across all 47 Kenyan counties with pay-on-arrival delivery you only pay when the switch reaches you. Major cities including Nairobi, Mombasa, Kisumu, Nakuru, and Eldoret receive next-business-day delivery. Other locations including Lodwar, Wajir, Mandera, and Marsabit receive delivery within 2-3 business days.
Our Nairobi CBD service desk handles after-sales support directly. Buyers across Kenya rely on Mascom International for honest specifications, current Kenyan pricing, and dependable warranty backing on every network switch we stock.
