The CUDY GS105 5-Port Gigabit Switch is now available at Mascom International for KSh 2,500, giving Kenyan homes and small offices five 10/100/1000 Mbps Ethernet ports in a compact metal case measuring just 86.5 by 53 millimetres. This CUDY GS105 unit runs plug-and-play, needs no setup, and moves data at full Gigabit speed with a 10 Gbps switching capacity. Mascom International stocks the CUDY GS105 at our Nairobi CBD store, Old Mutual Building, First Floor Room 4, Kimathi Street. Every unit ships with its own power adapter and an installation guide, ready to grow your wired network the moment you plug it in.
The CUDY GS105 suits small offices in Nairobi CBD, home fibre users on Safaricom Home Fibre, Zuku, or JTL Faiba, cyber cafés, and CCTV installers who run out of router ports. Most home and office routers carry only four LAN sockets, and those fill up fast once you add a desktop, a printer, a TV box, and a network video recorder. The CUDY GS105 solves this by turning one router port into five, letting you wire several devices to the same internet line at once. Gamers, remote workers, and shared households across Kenya use it to keep every device on stable cable instead of crowded Wi-Fi.
Unlike other electronics retailers in Kenya who stock unbranded switches with no warranty, Mascom International supplies the CUDY GS105 as a genuine unit with a 6-month warranty and honest specifications. Users consistently report that the metal casing stays cool without a fan, runs silently, and draws only 1.2 watts at full load a real saving on KPLC tokens for anything left on all day. At Mascom International, we're seeing steady demand for the CUDY GS105 from home offices and CCTV jobs countrywide. Visit our Kimathi Street store to see the unit, or order for pay-on-arrival delivery to any of Kenya's 47 counties.
Common Questions About the CUDY GS105
What can I connect to the CUDY GS105 5-Port Gigabit Switch?
You can connect any wired device with an Ethernet port: desktop computers, laptops, printers, network video recorders, TV boxes, gaming consoles, access points, and IP CCTV cameras. The GS105 has five RJ45 ports, so one port takes the cable from your router and the remaining four link your devices. Each port auto-detects speed from 10 to 1000 Mbps, so old and new equipment work side by side. A shared house in Kilimani or a small office in the CBD can put four wired devices on one internet line without touching any settings.
Do I need to configure or install any software?
No. The CUDY GS105 is an unmanaged plug-and-play switch, which means it works the instant you connect the cables and power. There is no app, no login page, no IP address to remember, and nothing to set up. You plug the power adapter into a socket, run one cable from your router to any port, then connect your devices to the other ports. The switch learns which device sits on which port on its own and starts moving traffic within seconds. This makes it a fit for anyone who wants more wired connections without networking knowledge.
How is the CUDY GS105 different from a cheaper unbranded switch?
The CUDY GS105 gives you true Gigabit speed, a metal case, built-in surge and static protection, and a warranty features many unbranded switches skip. Cheap plastic switches often cap at 100 Mbps, which throttles fibre plans above that speed and slows large file transfers. The GS105 pushes the full 1000 Mbps on every port, backed by a 10 Gbps switching capacity so no port waits on another. The metal casing spreads heat and survives daily use better than plastic. Mascom International supplies genuine CUDY stock, not grey imitations, with real after-sales support.
Will it slow down my internet if I connect many devices?
No. The CUDY GS105 uses a non-blocking design, meaning all five ports can run at full Gigabit speed at the same time without fighting for bandwidth. Its 7.44 Mpps forwarding rate and 2048-entry address table handle everyday home and small-office traffic with room to spare. The switch shares your existing internet line, so total download speed still depends on your fibre or router plan, but wiring devices through the GS105 gives each one a steadier, lower-lag path than Wi-Fi. Gamers and video callers on Safaricom Home Fibre notice fewer drops on cable.
How far can I run a cable from the switch?
The CUDY GS105 supports Gigabit connections up to 140 metres over Cat 5e or better cable, about 40 percent farther than the usual 100-metre limit on standard switches. That extra reach helps when wiring a CCTV camera at the far corner of a compound, linking an outbuilding to the main house, or running a cable across a two-storey office. For 10 and 100 Mbps links, cable runs reach 100 metres. Using quality Cat 5e or Cat 6 cable, which Mascom International also stocks, keeps speeds stable across the full distance.
Does it work with my Safaricom, Zuku, or Faiba fibre router?
Yes. The CUDY GS105 works with any router or ONT that has an Ethernet port, including Safaricom Home Fibre, Zuku Fiber, JTL Faiba, and Airtel routers. You simply run one cable from a free LAN port on your router into any port on the switch, and the switch extends that single connection to four more devices. It does not replace your router or Wi-Fi; it adds wired ports to what you already have. This is the easy way to connect more desktops, a printer, and a TV box when your fibre router runs out of sockets.
How much power does it use and does it get hot?
The CUDY GS105 draws no more than 1.2 watts and just 0.2 watts when idle, so it costs very little to keep running around the clock on KPLC power. It has no fan, which means it runs completely silent a plus for a bedroom, study, or quiet office. The metal casing acts as a heat spreader, staying cool during normal use, and the switch reduces power on ports with no device plugged in. Left on all day for CCTV or a home server, its running cost stays negligible on your monthly tokens.
Is the CUDY GS105 good for CCTV and NVR setups?
Yes, the CUDY GS105 works well for small IP camera systems, linking several cameras and a network video recorder on one wired network at full Gigabit speed. Note that this model does not supply power over the cable, so cameras that need PoE require a separate PoE injector or a PoE switch, which Mascom International can also supply. For CCTV setups where cameras have their own power, the GS105 handles the data side cleanly, and its 140-metre reach suits cameras placed at gates, perimeters, and outbuildings on Kenyan compounds.
Technical Specifications
Gigabit Ports and Switching Speed
- Five 10/100/1000 Mbps RJ45 ports auto-negotiate speed, so old and new devices connect without manual settings.
- Non-blocking design lets all five ports run full Gigabit at once with no slowdown between them.
- 10 Gbps switching capacity moves data across every port together, matching busy home and office use.
- 7.44 Mpps forwarding rate processes packets fast enough for HD streaming, gaming, and large file copies.
- 2048-entry MAC address table tracks connected devices so traffic reaches the right port every time.
- 1 Mbit packet buffer holds short data bursts to keep transfers smooth during peak load.
- 9 KB jumbo frame support speeds up large transfers between computers and network storage.
Long-Distance Cable Transmission
- Gigabit links reach 140 metres over Cat 5e or higher cable, 40 percent past the usual 100-metre limit.
- 10 and 100 Mbps connections run up to 100 metres, covering most home and office cable routes.
- Extra reach simplifies wiring across two floors, outbuildings, and CCTV camera positions on larger compounds.
- Auto-MDI/MDIX means any cable, straight or crossover, works in any port without checking cable type.
- Cat 6 cabling from Mascom International keeps full speed stable across long runs.
Low Power Consumption
- Draws no more than 1.2 watts under full load, costing very little to run on KPLC tokens.
- Idle draw of just 0.2 watts saves power when devices are off or disconnected.
- Fanless build runs silently, suiting bedrooms, studies, and quiet offices with no noise.
- Ports with no device attached power down automatically to cut wasted electricity.
- DC 5V 0.55A input keeps the unit safe and cool for round-the-clock use.
Metal Build and Mounting
- Sturdy metal casing spreads heat and resists knocks better than plastic switches over years of use.
- Compact 86.5 by 53 by 23 millimetre size fits on a desk, shelf, or network box.
- Two mounting holes on the base allow wall fixing to keep cables tidy and off the floor.
- Light 115-gram weight sits firmly without sliding, and mounts easily on drywall or wood.
- Rated for 0 to 40 degrees Celsius, matching Nairobi, Mombasa, and upcountry room conditions.
Network Standards Supported
- IEEE 802.3ab 1000BASE-T delivers true Gigabit speed on standard copper Ethernet cabling.
- 802.3u 100BASE-TX and 802.3i 10BASE-T keep older 100 and 10 Mbps devices fully compatible.
- 802.3x flow control prevents data loss when one port sends faster than another can receive.
- IGMP snooping directs video and multicast streams only to ports that request them, cutting clutter.
- Works with every router brand, including Safaricom, Zuku, Faiba, and Airtel fibre equipment.
Traffic Handling and Protection
- Built-in ESD protection guards the ports against static from cable handling and dry-season conditions.
- 2kV surge protection shields the switch from power spikes common during Kenyan storms and outages.
- Non-blocking forwarding sends packets at wire speed for full throughput across all five ports.
- MAC address auto-learning and auto-aging keep the switching table current as devices come and go.
- Per-port LED shows link and activity, making it easy to spot a loose cable at a glance.
What's in the Box
Each CUDY GS105 from Mascom International includes the GS105 5-port Gigabit switch unit, a matching DC power adapter (100-240V input, 5V 0.55A output), and an installation guide. The power adapter is included in the box, so there is nothing extra to buy to get started. Ethernet cables are sold separately; Mascom International stocks Cat 5e and Cat 6 cables in various lengths to pair with your switch.
Warranty
The CUDY GS105 carries a 6-month Mascom International warranty covering manufacturing defects under normal use. Our Nairobi CBD service desk at Old Mutual Building, Kimathi Street handles any warranty claim directly, so support stays local and quick. Bring the unit to the store or reach our team by phone or WhatsApp to arrange a replacement if a fault appears within the cover period.
Where to Buy the CUDY GS105 in Kenya
The CUDY GS105 5-Port Gigabit Switch is available now at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, to see the unit and pick up Cat 5e or Cat 6 cabling to go with it. The switch comes in a single metal finish.
Order through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
- WhatsApp: +254 708 852 521
Mascom International ships the CUDY GS105 across all 47 Kenyan counties with pay-on-arrival delivery you pay only once the unit reaches you. Nairobi and its environs receive same-day delivery, while Mombasa, Kisumu, Nakuru, Eldoret, and other major towns receive theirs within 1 business day. Outer counties receive delivery within 2 to 3 business days. Buyers across Kenya rely on Mascom International for genuine networking gear, accurate specifications, current pricing, and direct after-sales support from our Nairobi CBD store.
