The Cudy GS1008P 8-Port Gigabit PoE+ Switch is now available at Mascom International for KSh 9,500, stocked at our Old Mutual Building location on Kimathi Street, Nairobi CBD. This unmanaged switch carries eight Gigabit ports running at 10/100/1000 Mbps, four of which supply Power over Ethernet at a combined 60W budget, up to 30W on a single port. It runs fanless and silent inside a metal case. The Cudy GS1008P sends power and data down the same Ethernet cable to IP cameras, VoIP phones, and wireless access points, removing the need for a separate power socket beside every device you mount.
The Cudy GS1008P suits CCTV installers, small-office IT technicians, and business owners across Kenya running IP-based security or phone systems. A Nairobi apartment block, cyber cafe, or Westlands office often needs cameras and access points placed where wall sockets rarely reach. Running a separate power line to each corner costs money and adds hours to a job. The Cudy GS1008P handles this by carrying power and data over one network cable up to 100 metres, so a technician mounts a camera on a stairwell ceiling or fits a phone at a reception desk with a single cable run.
Unlike other electronics retailers in Kenya that stock unbranded PoE switches with vague power ratings, Mascom International sells the Cudy GS1008P with verified specifications and clear warranty terms. Installers across Nairobi report that the 60W budget comfortably runs four standard IP cameras or three access points without dropping power. The fanless metal body copes with the warm, dusty conditions common in ceiling voids and back-office cupboards. Visit Mascom International on Kimathi Street to inspect the Cudy GS1008P in person, or order it for pay-on-arrival delivery to any of Kenya's 47 counties.
Common Questions About the Cudy GS1008P
What can the Cudy GS1008P power in a Kenyan CCTV or office setup?
The Cudy GS1008P powers any device that follows the IEEE 802.3af or 802.3at standard: IP security cameras, VoIP desk phones, and Wi-Fi access points are the common ones. Each of the four PoE ports feeds a device up to 30W, and the switch shares a 60W total across those ports. That covers a small home or shop CCTV setup, a reception desk phone system, or an office adding wireless coverage. The four regular Gigabit ports connect your router, recorder, or computers that supply their own power.
How many IP cameras can the 60W budget actually run?
The 60W budget runs roughly four standard fixed IP cameras, since most draw between 6W and 12W each. If you connect pan-tilt-zoom cameras or units with infrared heaters that pull 15W or more, plan for two or three instead. Add up the wattage listed on your camera labels and keep the total under 60W. Mascom International helps you count this before you buy, so your Nairobi install runs every camera at full power without the switch cutting a port.
Is the Cudy GS1008P easy to set up without an IT background?
Yes. The Cudy GS1008P is unmanaged and plug-and-play, meaning no configuration, passwords, or web setup. You plug the power adapter into a wall socket, connect your router to one port, and connect cameras or phones to the PoE ports. The switch detects each device and starts supplying power automatically. LED lights on the front show link, activity, and PoE status per port, so a shop owner in Nakuru or a homeowner in Kiambu can spot a loose cable or a powered camera at a glance.
What is the difference between the four PoE ports and the four regular ports?
Ports one to four supply both data and power, so you use them for cameras, phones, or access points that draw power over the cable. Ports five to eight move data only, so you connect your fibre router, a network video recorder, a desktop, or another switch to them. All eight ports run at full Gigabit speed. You can still plug a non-PoE device into a PoE port; the switch simply passes data and skips the power. This split keeps a typical Kenyan CCTV plus internet setup on one unit.
Does the switch work with any brand of IP camera or access point?
The Cudy GS1008P works with any camera, phone, or access point that meets the IEEE 802.3af or 802.3at PoE standard, regardless of brand: Hikvision, Dahua, TP-Link, Ubiquiti, and Cudy's own gear all qualify. It does not power passive or non-standard PoE devices, and it safely detects this before sending current, so it will not damage a plugged-in unit. If you are unsure whether your camera is standard PoE, Mascom International checks the model against its specifications before you commit to the KSh 9,500 purchase.
How does Extend mode help long cable runs in large compounds?
Extend mode lets ports one to four push data and power up to 250 metres, well beyond the usual 100-metre Ethernet limit, by capping those ports at 10 Mbps. That speed still carries a standard security camera feed comfortably. It suits a gated community in Karen, a school in Machakos, or a warehouse on Mombasa Road where a gate camera or perimeter unit sits far from the equipment room. You flip a physical switch on the unit to turn Extend mode on; no software is involved.
Is the Cudy GS1008P worth KSh 9,500 compared with cheaper unbranded switches?
At KSh 9,500 the Cudy GS1008P gives you a named brand, a stated 60W budget, safety detection that protects your devices, and a Mascom International warranty. Cheaper unbranded switches often overstate their power, lack proper PoE detection, and carry no support once they fail. Buyers throughout Kenya tell us a cut-price switch that shuts off cameras at night costs far more than the saving. Mascom International backs every Cudy GS1008P with clear terms and a Nairobi CBD service desk you can walk into.
How does Mascom International deliver and back the Cudy GS1008P?
Mascom International ships the Cudy GS1008P across all 47 Kenyan counties with pay-on-arrival delivery, so you pay only when the switch reaches you. Nairobi and its environs get same-day delivery, major towns receive it within one business day, and outer counties within two to three days. You can also collect it at our Kimathi Street shop, open Monday to Saturday, 9:00 AM to 7:00 PM. Reach us on +254 708 852 521, WhatsApp, info@mascomintl.com, or www.mascomintl.com to confirm stock and place your order.
Technical Specifications
Port Layout and Gigabit Speed
- Eight RJ45 ports run at 10/100/1000 Mbps, giving full Gigabit speed on every connection for cameras, recorders, and computers.
- Ports one to four carry data plus PoE power for cameras, phones, and access points on a single cable.
- Ports five to eight carry data only, suited to your router, network video recorder, or desktop machines.
- Every port auto-negotiates speed and duplex, so mixed old and new devices connect without manual settings.
- Ports use nickel-plated copper shielding that reduces interference on longer cable runs inside buildings.
- •The unmanaged design means no VLAN setup or logins are required before the switch starts working.
Power over Ethernet Capacity
- The switch shares a 60W total PoE budget across four ports, feeding up to 30W to any single device.
- It supports IEEE 802.3af (up to 15.4W) and 802.3at PoE+ (up to 30W) powered devices.
- Auto-detection checks each connected device and only sends power to standard PoE units, protecting your equipment.
- Passive and non-standard PoE devices are not powered, which prevents damage from mismatched voltage.
- One cable carries both power and data up to 100 metres, cutting the cost of separate electrical wiring.
- An external 60W power supply with a DC48–57V input feeds the whole unit from one wall socket.
Switching Performance and Throughput
- A 16 Gbps switching capacity lets all eight ports move traffic at the same time without slowing down.
- Non-blocking throughput handles up to 8 Gbps, so camera feeds and file transfers run together cleanly.
- Store-and-forward switching checks each data packet, reducing errors on busy security and office networks.
- A built-in MAC address table directs traffic straight to the right port instead of flooding the network.
- Full-duplex operation on every port lets devices send and receive at once for smoother video streams.
- Line-rate forwarding keeps recording steady when several cameras write to one network video recorder.
Build, Cooling, and Installation
- A fanless design runs the switch silently, suiting a reception desk, bedroom, or quiet office corner.
- The SPCC metal casing dissipates heat and resists knocks in cupboards, ceiling voids, and equipment rooms.
- Two rear mounting holes let you fix the unit flat on a wall to save desk space.
- The compact desktop size fits inside a small comms box, cabinet, or shelf without crowding other gear.
- Passive cooling means no fan to clog with dust, which matters in Kenya's dustier towns and workshops.
- Front-panel LED indicators show link, activity, and PoE status for quick checks without extra tools.
Operating Modes and Port Protection
- Extend mode pushes ports one to four up to 250 metres at 10 Mbps for distant gate or perimeter cameras.
- Priority mode moves data on ports one and two ahead of the rest for latency-sensitive phones or feeds.
- The Watchdog function watches each PoE port and reboots a frozen camera or phone automatically after five minutes.
- Surge and static protection on the ports reduces downtime from power spikes common on Kenyan supply lines.
- Physical toggle switches control Extend, Priority, and Watchdog, so you change modes without any software.
- Built-in short-circuit and overload protection guards the switch and connected devices during faults.
What's in the Box
Every Cudy GS1008P from Mascom International arrives with the switch unit, the external 60W power adapter, a power cable, a wall-mounting screw set, and a quick installation guide. The guide walks you through connecting your router, cameras, and phones, plus how to turn on Extend, Priority, and Watchdog modes. Nothing further is needed to run the switch. Mascom International also supplies matching Cat6 network cables and standard PoE IP cameras if you want to complete your install in one visit.
Warranty and Support
The Cudy GS1008P carries a 12-month Mascom International warranty covering manufacturing defects under normal use. Our Nairobi CBD service desk handles any claim directly, with no need to ship the unit abroad. Customers across Kenya rely on Mascom International for honest specifications and dependable after-sales support on every networking product we stock.
Where to Buy the Cudy GS1008P in Kenya
The Cudy GS1008P 8-Port Gigabit PoE+ Switch is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk into our shop Monday through Saturday, 9:00 AM to 7:00 PM, to inspect the switch and test it against your own camera or phone before purchase. Our team helps you calculate your PoE power needs so you buy the right unit the first time.
Order through any of the following:
- Phone: +254 708 852 521
- WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the Cudy GS1008P across all 47 Kenyan counties with pay-on-arrival delivery, so you inspect the switch and pay only when it reaches you. Nairobi and its environs receive same-day delivery, major towns get theirs within one business day, and outer counties within two to three business days. Whether you install cameras in Kisumu, fit phones in an Eldoret office, or set up Wi-Fi in a Mombasa apartment, Mascom International delivers to your door. Buyers across Kenya count on Mascom International for accurate networking specifications, current KSh pricing, and warranty backing you can claim in person at our Nairobi CBD store.
