CUDY GS1005P 5-Port Gigabit PoE+ Switch is now available at Mascom International for KSh 6,500, stocked at our Old Mutual Building store on Kimathi Street, Nairobi CBD. This unmanaged switch carries five Gigabit Ethernet ports four of them PoE+ ports that send data and electrical power down a single network cable plus one uplink port for your router. The CUDY GS1005P shares a 60W power budget across those four ports, feeding up to 30W to any single connected device. IP cameras, Wi-Fi access points, and VoIP phones then run without a nearby wall socket. The CUDY GS1005P ships plug-and-play, needing no configuration.
Built for CCTV installers, small-office IT staff, and home security setups across Kenya, the CUDY GS1005P solves the wiring problem that PoE was created to fix. Running mains power to a rooftop camera or a ceiling access point usually means calling an electrician and drilling fresh conduit. The GS1005P removes that step one Cat5e or Cat6 cable carries both the network link and the power. Security firms wiring shops along Moi Avenue, hotels installing lobby Wi-Fi, and homeowners in Kileleshwa adding gate cameras all reach the same result: fewer cables, no separate power supply at each device, and a cleaner install.
Unlike other electronics retailers in Kenya who stock unbranded switches with vague power ratings, Mascom International lists the CUDY GS1005P with its verified 60W budget, 30W-per-port ceiling, and surge-protection figures stated plainly. Installers consistently report that the fanless metal body runs silent and cool inside distribution boxes, with no moving parts to wear out. The switch also shields connected cameras against power surges and static discharge a real concern given Kenya's occasional grid spikes. Visit Mascom International to see the CUDY GS1005P before buying, or order for pay-on-arrival delivery to any of the 47 counties.
Common Questions About the CUDY GS1005P
What is the CUDY GS1005P used for?
The CUDY GS1005P powers and connects network devices over a single cable. Its four PoE+ ports carry both data and electricity, so an IP camera, Wi-Fi access point, or VoIP phone plugged into the switch needs no separate power brick at its location. The fifth port is an uplink that links the switch back to your router or main network. Small offices, retail shops, homes, and security installations use it to spread cameras and access points around a building without running mains power to each spot. It works out of the box with no setup screen.
How many devices can the CUDY GS1005P power at once?
The CUDY GS1005P powers up to four PoE devices at the same time, sharing a total 60W budget. Any single port can push up to 30W, enough for most fixed and pan-tilt IP cameras or a dual-band access point. If your four devices together stay under 60W, all run normally. If they try to draw more, the switch automatically cuts power to the device connected most recently, protecting the rest. For four typical 12W to 15W cameras, the 60W budget leaves comfortable headroom for daily use.
What is the difference between the PoE ports and the uplink port?
Ports one to four are the PoE+ ports they carry data and supply power, feeding cameras, access points, or phones directly. Port five is the uplink: it moves data only and connects the switch to your router, gateway, or a larger network switch. You plug your internet source into port five, then run cables from the four PoE ports out to your powered devices. All five ports run at full Gigabit speed, so wired backups, NVR recording, and camera streams move at 1,000 Mbps without a bottleneck between them.
Does the CUDY GS1005P work with any IP camera or access point?
The CUDY GS1005P works with any device that follows the IEEE 802.3af or 802.3at PoE standard, which covers the large majority of IP cameras, access points, and VoIP phones sold in Kenya. Standard PoE devices draw up to 15.4W; PoE+ devices draw up to 30W, and this switch supports both. Before buying, check that your camera or access point lists "802.3af" or "802.3at" on its label passive or proprietary PoE gear will not draw power correctly. Mascom International staff can confirm compatibility for the exact model you plan to run.
What do the VLAN and Extend modes do?
A small switch on the side sets three modes. Default mode runs the switch as a normal network hub. VLAN mode isolates the four downlink ports from each other, so a hacked camera cannot reach the others useful for surveillance security. Extend mode stretches the cable reach to 250 metres by dropping those ports to 10 Mbps, handy for a far gate camera or an outbuilding across a compound. A separate Watchdog switch reboots any PoE device that freezes and stops sending data for five minutes, restoring cameras without a site visit.
Is the CUDY GS1005P noisy, and does it need cooling?
The CUDY GS1005P is completely silent because it has no fan. Heat escapes through the metal casing instead, so there are no moving parts to hum, rattle, or clog with dust. This suits it to quiet rooms, reception desks, and sealed distribution boxes where a fan would either annoy people or fail early from trapped dirt. The metal shell also spreads heat better than plastic, holding steady temperatures during 24-hour camera recording. It fits neatly inside most wall-mounted distribution enclosures used in Kenyan CCTV installs.
How does the CUDY GS1005P protect connected devices in Kenya's power conditions?
The CUDY GS1005P carries built-in surge and static protection rated to industry EMC levels, guarding cameras and access points against the voltage spikes that follow power cuts and grid switching. Its ports handle contact static discharge to 6kV and air discharge to 8kV, plus power-line surge protection to 4kV common-mode. In practice, this reduces the chance that a lightning-season spike travelling down an outdoor camera cable damages the whole chain. For Kenyan sites that see frequent outages and reconnections, this protection helps keep a security system running longer.
Is the CUDY GS1005P worth KSh 6,500 for a small setup in Kenya?
For a four-camera home or small-shop CCTV system, the CUDY GS1005P at KSh 6,500 removes the cost and clutter of four separate camera power supplies and their extra sockets. One switch, one power adapter, and one wall spot replace all of them. The Gigabit speed also future-proofs the install for higher-resolution cameras and faster NVR recording than older 100 Mbps switches allow. Mascom International prices it fairly for the Kenyan market and backs it with a 12-month warranty, making it a sensible core for most small PoE deployments.
Technical Specifications
PoE Power System
- Four PoE+ ports on connections one to four, supplying power and data together over one cable.
- 60W total PoE budget shared across the four ports for combined device draw.
- Up to 30W to any single port, covering most IP cameras and dual-band access points.
- Supports IEEE 802.3af standard PoE (15.4W) and 802.3at PoE+ (30W) devices.
- Automatic power-priority management drops the newest device if total draw passes 60W.
- Auto-detection avoids sending power to non-PoE gear, preventing damage to plain Ethernet devices.
Port Configuration and Network Speed
- Five 10/100/1000 Mbps RJ45 ports, each auto-negotiating to the connected device's speed.
- One dedicated uplink port links the switch to your router or wider network.
- 10 Gbps switching capacity moves traffic between all ports without slowdown.
- 7.44 Mpps forwarding rate keeps camera streams and file transfers flowing at once.
- 2,048-entry MAC address table tracks connected devices on busier networks.
- 15KB jumbo frame support speeds up large NVR and backup transfers.
Operating Modes and Port Management
- Default mode runs the unit as a plain plug-and-play network switch.
- VLAN mode isolates the four PoE ports from each other to limit hacking risk.
- Extend mode reaches 250 metres by dropping affected ports to 10 Mbps.
- Watchdog function reboots a frozen PoE device after five minutes of no data.
- Physical DIP switch selects the mode with no software or login needed.
- PoE Max status LED warns when the 60W power budget is fully used.
Protection and Reliability
- Static discharge protection rated to 6kV contact and 8kV air per IEC 61000-4-2.
- Surge protection to 4kV common-mode on RJ45 lines per IEC 61000-4-5.
- Three-prong grounded plug channels stray voltage safely away from connected gear.
- Shielded RJ45 ports reduce interference on cable runs near power lines.
- No fan and no moving parts lower the long-term failure rate.
- Metal casing resists knocks inside distribution boxes and equipment cabinets.
Build and Installation
- Compact 119 x 85 x 28 mm body fits most wall distribution enclosures.
- Light 253g weight mounts on a wall bracket without heavy fixings.
- Included wall-mount kit supports vertical fixing to save desk and floor space.
- Metal shell spreads heat for steady running during 24-hour recording.
- Desktop or wall placement suits offices, shops, homes, and equipment rooms.
- LED indicators show power, per-port link activity, and PoE status at a glance.
Power and Environmental Range
- External 60W adapter accepts 100-240V mains, matching Kenyan wall voltage.
- Adapter outputs 52V to feed the PoE ports at full rated power.
- Draws only 5W for switching itself when no PoE devices are attached.
- Operates from 0 to 40 degrees Celsius, covering Kenyan indoor conditions.
- Handles 10 to 90 percent humidity without condensation for coastal and inland sites.
- Fanless cooling keeps the unit quiet and dust-tolerant in sealed cabinets.
What's in the Box
The CUDY GS1005P retail package includes the switch unit, the external 52V power adapter, a mains power cord, a wall-mounting kit for vertical installation, and a printed installation guide. No network cables are supplied, so budget for the Cat5e or Cat6 runs your install needs. Mascom International stocks quality Cat6 cabling, RJ45 connectors, and compatible IP cameras and access points, so you can assemble a full PoE system in one visit to our Kimathi Street store.
Warranty
The CUDY GS1005P carries a 12-month Mascom International warranty covering manufacturing defects under normal use. Our Nairobi CBD service desk handles any warranty claims directly, so you deal with our team in person rather than shipping the unit abroad. Buyers across Kenya rely on Mascom International for honest specifications and dependable after-sales support on every networking product we stock.
Where to Buy the CUDY GS1005P in Kenya
The CUDY GS1005P is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, to inspect the switch and confirm compatibility with your cameras or access points before you buy. The unit comes finished in a black metal casing built for wall or desktop mounting.
Order through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the CUDY GS1005P across all 47 Kenyan counties with pay-on-arrival delivery you only pay once the switch reaches you. Nairobi and its environs receive same-day delivery, while Mombasa, Kisumu, Nakuru, Eldoret, and other major towns receive next-business-day delivery. Outer counties receive the switch within 2-3 business days.
The CUDY GS1005P carries a 12-month Mascom International warranty on manufacturing defects, with claims handled directly at our Nairobi CBD service desk. Whether you run a four-camera shop system on Moi Avenue or a wireless setup for a Kileleshwa home, Mascom International supplies the CUDY GS1005P with accurate specifications, current Kenyan pricing, and after-sales support you can reach in person.
