MSI MAG CORELIQUID A15 360 is now in stock at Mascom International for KSh 18,000, pairing a 360mm aluminium radiator with three 120mm CycloBlade 9 ARGB fans and a copper-base pump running up to 3,400 RPM. This all-in-one liquid cooler handles heat loads up to 300 watts, keeping high-core-count Intel and AMD processors stable during long gaming, rendering, and encoding sessions. The MSI MAG CORELIQUID A15 360 fits Intel LGA 1700 and LGA 1851 sockets plus AMD AM4 and AM5 boards through a pre-installed UNI Bracket. You can buy the MSI MAG CORELIQUID A15 360 today at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD.
Built for PC builders, gamers, video editors, and 3D artists across Kenya, the MSI MAG CORELIQUID A15 360 solves the overheating and thermal-throttling problem that hits high-heat desktop chips inside Nairobi's warm indoor spaces. Air coolers on a Core i7, Core i9, Ryzen 7, or Ryzen 9 often run hot and loud once you push rendering in Blender, streaming on OBS, or competitive gaming for hours. This cooler pulls that heat into a 360mm radiator and pushes it out through three quiet fans, so clock speeds hold instead of dropping. Content creators in Westlands, Kilimani, and Ruaka building editing workstations get a cooler that runs steady under sustained load.
MSI MAG CORELIQUID A15 360 stands apart from the guesswork many buyers face when sourcing PC cooling parts in Kenya's market. Unlike other electronics retailers in Kenya, Mascom International lets you inspect the MSI MAG CORELIQUID A15 360 in person before purchase and confirm socket fit for your exact build. Users consistently report that the pre-installed fans and daisy-chained cables cut installation down to a two-connector job, and reviewers found it tames a Core i7-14700K near 79°C in heavy encoding tests. Visit our Nairobi CBD store to see the ARGB lighting, or order for pay-on-arrival delivery to any of Kenya's 47 counties.
Common Questions About theMSI MAG CORELIQUID A15 360 Cooler
Is the MSI MAG CORELIQUID A15 360 a good cooler for a gaming PC in Kenya?
Yes. The MSI MAG CORELIQUID A15 360 is a strong match for gaming and creator PCs built around high-heat processors like the Core i7, Core i9, Ryzen 7, and Ryzen 9. Its 360mm radiator and three 120mm fans move enough heat to hold boost clocks during long sessions, and independent reviewers rated its cooling close to units costing far more. In Kenya's warm room temperatures, that headroom keeps your CPU from throttling. It suits both first-time builders and experienced users upgrading a hot-running air cooler.
Which processor sockets does the MSI MAG CORELIQUID A15 360 support?
The cooler supports Intel LGA 1700 and the newer LGA 1851, plus AMD AM4 and AM5 sockets. That covers 12th, 13th, and 14th-generation Intel Core chips, Intel Core Ultra Series 2, and Ryzen from the 5000 through 9000 series. The pre-installed UNI Bracket ships already fitted to the pump, so you rarely swap brackets between Intel and AMD. Before buying, tell our team your motherboard model and we confirm exact fit, which prevents the wrong-socket returns that frustrate many Nairobi buyers.
How loud is the MSI MAG CORELIQUID A15 360 under load?
The three CycloBlade 9 fans peak at 28.7 dBA at their full 2,050 RPM, which reviewers describe as quiet for a 360mm setup. Each fan pushes up to 64.9 CFM of airflow, so you get cooling without a loud whine at your desk. Drop the pump and fan speed slightly through MSI Center software and the noise falls further while cooling stays strong. For open-plan homes and shared spaces in Nairobi apartments, this keeps a gaming or editing rig from disturbing others nearby.
Does the MSI MAG CORELIQUID A15 360 come with ARGB lighting I can customise?
Yes. Both the three radiator fans and the pump head carry ARGB GEN2 lighting. You control colours, patterns, and speed-synced effects through MSI Center or Mystic Light software, and it syncs with compatible MSI motherboards and other Mystic Light gear. The lighting connects through the same daisy-chained wiring as the fans, so cable clutter stays low inside your case. Buyers who want a clean, colour-matched build get full control without extra ARGB controllers or splitter hubs.
How hard is the MSI MAG CORELIQUID A15 360 to install?
Installation is quicker than most 360mm coolers because MSI pre-installs the three fans on the radiator and links their power and lighting cables. Instead of routing six or more cables, you connect two. The UNI Bracket comes fitted for Intel and AMD, and an adjustable offset kit with two positions helps centre the copper base over the CPU die. First-time builders in Kenya manage the fit with the included guide, and our Nairobi CBD team walks you through mounting if you buy in store.
Will the MSI MAG CORELIQUID A15 360 fit inside my PC case?
The radiator measures 394mm long, 120mm wide, and 27mm thick, so any case that lists 360mm radiator support will house it. With fans attached you need about 52mm of clearance between the motherboard and the case top or front panel. The slim radiator fits more cases than thicker rivals, including some compact builds. Share your case model with our team before purchase and we confirm clearance, sparing you the fitment surprises that catch out buyers ordering blind online.
How does the MSI MAG CORELIQUID A15 360 compare to a big air cooler?
For high-heat chips, the MSI MAG CORELIQUID A15 360 cools better and runs quieter than most tower air coolers while freeing up space around your RAM and motherboard. Reviewers found it beat large dual-tower air coolers by a few degrees on a Core i7-14700K. Air coolers cost less and never risk a pump, but a 360mm liquid cooler gives more thermal headroom for overclocking and sustained rendering. For a Ryzen 9 or Core i9 build in Kenya's climate, the liquid route holds clocks more consistently.
Why buy the MSI MAG CORELIQUID A15 360 from Mascom International?
Buying from Mascom International means you confirm socket and case fit before paying, inspect the actual unit, and get pay-on-arrival delivery countrywide. Unlike traditional electronics retailers in Kenya, we give you honest specifications and a Nairobi CBD service desk for any warranty claim. Customers across Nairobi, Nakuru, Kisumu, Eldoret, and Mombasa order PC parts through us daily. You also skip the risk of grey-market cooling parts with no local support, a common frustration when buying components online.
Technical Specifications
Cooling Hardware and Pump Performance
- Copper-base pump spins up to 3,400 RPM using ceramic bearings, moving coolant fast to pull heat off the CPU quickly.
- Full-plane, screwless copper base improves the water-tight seal and spreads contact evenly across the processor lid.
- A 0.1mm micro-channel design inside the base absorbs heat across a wide surface for faster transfer into the coolant.
- Rated to handle heat loads up to 300 watts, enough for high-core Intel Core i9 and AMD Ryzen 9 processors under load.
- Adjustable offset kit offers two positions to centre the base over the CPU die for better contact and lower temperatures.
- Pump section carries ARGB GEN2 lighting controlled through MSI Center for colour-matched builds.
Radiator and Fan Configuration
- 360mm aluminium radiator with a 12-channel split-flow layout separates hot and cold coolant paths to shed heat faster.
- Fin density reaches 20 fins per inch, adding cooling surface area for stable temperatures during overclocking.
- Radiator body is 394mm long and just 27mm thick, fitting any case rated for a 360mm radiator.
- Three MSI CycloBlade 9 120mm fans spin up to 2,050 RPM, each pushing up to 64.9 CFM of airflow.
- Rifle-bearing fans run at 28.7 dBA at full speed, staying quiet for a triple-fan setup.
- Fans mount pre-installed on the radiator, cutting build time and reducing cable routing to two connectors.
Socket Compatibility and Fit
- Supports Intel LGA 1700 and LGA 1851 sockets, covering 12th to 14th-gen Core and Core Ultra Series 2 chips.
- Supports AMD AM4 and AM5 sockets, covering Ryzen 5000, 7000, and 9000 series processors.
- Pre-installed UNI Bracket ships fitted, so most users avoid swapping mounting hardware between platforms.
- Needs about 52mm of clearance above the radiator for fans, fitting standard and many compact cases.
- Square, compact pump mount clears tall RAM and fits space-limited Mini-ITX motherboards.
- Cold plate measures 40 x 40mm, matching mainstream desktop CPU heat-spreader sizes.
Lighting and Software Control
- ARGB GEN2 lighting covers both the three radiator fans and the pump head for a unified glow.
- MSI Center software sets fan curves, pump speed, and cooling profiles from within Windows.
- Mystic Light software customises colours, patterns, and effects synced to compatible MSI hardware.
- Lighting runs through the same daisy-chained wiring as the fans, keeping cable clutter low.
- Syncs with MSI motherboards, letting you tie cooling and lighting to your board's control panel.
- Hidden connectors route power and lighting behind the fans for a cleaner look inside glass-panel cases.
Build Quality and Tubing
- Nylon-braided EPDM rubber tubes resist heat, cold, corrosion, and aging for long service life.
- Braided sheathing over the tubing lowers coolant evaporation, helping the closed loop hold fluid over years of use.
- Flexible tubing bends easily during installation without kinking or fighting the radiator position.
- Cooler head uses a painted finish with brushed aluminium accents and angular styling for a bold look.
- Sealed closed-loop system arrives factory-filled, needing no coolant top-ups under normal use.
- Rifle-bearing fans and ceramic-bearing pump target a quiet, long-lasting build.
Installation and Software Setup
- Pre-installed fans and linked cables reduce a normally six-cable job down to two connectors.
- UNI Bracket arrives mounted for Intel and AMD, cutting bracket-swap steps for most builds.
- Two-position offset kit fine-tunes base alignment over the CPU die for lower temperatures.
- Included mounting hardware and guide walk first-time builders through the fit.
- MSI Center download gives full control of fan and pump behaviour after installation.
- Thermal paste is included so you can mount straight out of the box.
What's in the Box
The MSI MAG CORELIQUID A15 360 retail box includes the pump and 360mm radiator with three CycloBlade 9 120mm ARGB fans pre-installed, the UNI mounting bracket kit for Intel LGA 1700/1851 and AMD AM4/AM5, backplate and standoffs, an adjustable offset kit, thermal paste, cabling for fans and lighting, and the installation guide. Bring your motherboard details to our store and we confirm the correct mounting for your exact build.
Warranty and Support
The MSI MAG CORELIQUID A15 360 carries a 6-month Mascom International warranty covering manufacturing defects under normal use. Our Nairobi CBD service desk handles any warranty claim directly, and our team can advise on correct mounting and MSI Center setup after purchase.
Where to Buy the MSI MAG CORELIQUID A15 360 in Kenya
MSI MAG CORELIQUID A15 360 is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, to see the ARGB lighting and confirm socket and case fit for your build before you pay. This cooler ships in black.
Order through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the MSI MAG CORELIQUID A15 360 across all 47 Kenyan counties with pay-on-arrival delivery you pay only when the cooler reaches you. Nairobi and its environs receive same-day delivery, while Mombasa, Kisumu, Nakuru, and Eldoret get their orders within 1 business day. Outlying counties including Turkana, Marsabit, Mandera, Wajir, Lamu, and Tana River receive delivery within 2-3 business days.
Buyers across Kenya rely on Mascom International for accurate specifications, current market pricing, and direct after-sales support on every PC cooling component we stock. Whether you are building your first gaming rig in Nairobi or upgrading a rendering workstation upcountry, our team helps you match the MSI MAG CORELIQUID A15 360 to the right processor and case.
