The MSI MAG CORELIQUID A13 240 is a 240mm all-in-one liquid CPU cooler with a dual 120mm ARGB fan radiator, a three-phase pump running up to 3800 RPM, and a full copper cold plate, now available at Mascom International for KSh 16,000. This closed-loop cooler fits Intel LGA 1700 and LGA 1851 sockets plus AMD AM5 and AM4, and ships with thermal paste and a full mounting kit. You can buy the MSI MAG CORELIQUID A13 240 in person at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, or order it for pay-on-arrival delivery to any of Kenya's 47 counties.
The MSI MAG CORELIQUID A13 240 is built for PC gamers, video editors, 3D artists, streamers, and custom-build shops across Kenya who run hot processors like the Ryzen 7 7800X3D or Core i5-14600K. Stock air coolers and cheap tower heatsinks often let these chips throttle during long gaming or rendering sessions, especially in warm Nairobi rooms without air conditioning. When a CPU overheats, frame rates drop and export times climb. The MSI MAG CORELIQUID A13 240 moves that heat into a 240mm radiator and pushes it out with two fans, holding temperatures down so your processor keeps its full clock speed under load.
Unlike other electronics retailers in Kenya that stock coolers without setup guidance, Mascom International helps you confirm the MSI MAG CORELIQUID A13 240 clears your case and RAM before you pay. Custom builders across Nairobi report that the single-cable EZ Connect design and pre-installed fans cut their assembly time sharply. The MSI MAG CORELIQUID A13 240 comes in black and white to match most builds. Visit our Kimathi Street store to see it in person, or place your order by phone, and pay only when the cooler reaches your door.
Common Questions About the MSI MAG CORELIQUID A13 240 Cooler
What is the MSI MAG CORELIQUID A13 240 and what does it actually do?
The MSI MAG CORELIQUID A13 240 is a closed-loop liquid cooler that pulls heat off your CPU and dumps it into a 240mm radiator cooled by two fans. A copper plate sits on the processor, a pump circulates coolant through nylon-braided tubes, and the radiator releases the heat. Compared to a basic air cooler, this setup keeps demanding chips cooler and clears space around the socket. For Kenyan gamers and editors running Ryzen or Intel processors, that means steadier frame rates and fewer thermal slowdowns during hours-long sessions.
Which processors and sockets does the MSI MAG CORELIQUID A13 240 fit?
The MSI MAG CORELIQUID A13 240 fits Intel LGA 1700 and LGA 1851, plus AMD AM5 and AM4. That covers Intel's 12th, 13th, 14th, and Core Ultra generations, along with Ryzen 5000, 7000, and 9000 chips. The Intel bracket comes pre-installed to speed things up. Every mounting screw and the AMD bracket are included, and MSI packs thermal paste in the box so you do not buy it separately. Before purchase, confirm your motherboard socket and we will check case clearance with you.
How well does a 240mm cooler like this handle a hot gaming CPU?
The 240mm radiator and dual 120mm fans give the MSI MAG CORELIQUID A13 240 enough surface area to keep mainstream and mid-high processors in check under gaming and rendering loads. Its 27mm-thick radiator uses a 20 fins-per-inch layout and 12 widened water channels for around 25% more coolant flow. Reviewers rate its cooling on par with strong dual-tower air coolers. For a Core i5, Core i7, Ryzen 5, or Ryzen 7 running long sessions in a warm Nairobi room, it holds clock speeds steady without thermal throttling.
How loud is the MSI MAG CORELIQUID A13 240 during heavy use?
The MSI MAG CORELIQUID A13 240 stays quiet, with the CycloBlade 7 fans measured at roughly 30 dBA and rifle bearings that lower noise and extend fan life. That is about as loud as a quiet library, so the cooler blends into the background during normal work. The fans are PWM-controlled, so they slow down when your CPU is idle and ramp up only under load. Streamers and content creators recording near their PC report that the noise stays low enough to avoid picking up on a microphone.
Is the MSI MAG CORELIQUID A13 240 hard to install?
No. MSI built the MSI MAG CORELIQUID A13 240 around its EZ Connect design, which routes everything through a single cable instead of the three or four that older 240mm coolers needed. The two fans arrive pre-attached to the radiator, and the Intel bracket is already fitted. First-time builders in Kenya find the process manageable with the included manual, and Mascom's team can walk you through mounting orientation and case fit. Most customers complete the install in well under an hour without special tools.
Does the ARGB lighting on the MSI MAG CORELIQUID A13 240 work with my motherboard?
Yes. The MSI MAG CORELIQUID A13 240 uses ARGB GEN2 addressable lighting with 16.8 million colors, controlled through MSI Center and Mystic Light on MSI boards. Because it follows the standard 3-pin 5V addressable header, it also syncs with ASUS Aura Sync, Gigabyte RGB Fusion, and ASRock Polychrome on those brands' motherboards. The pump top carries indirect lighting that you can set to match the rest of your build. The top cover is replaceable, and MSI shares a 3D-print file so you can customize the look.
Is the MSI MAG CORELIQUID A13 240 worth KSh 16,000 in Kenya's market?
For most gaming and creator builds, yes. At KSh 16,000 the MSI MAG CORELIQUID A13 240 sits below many rival 240mm coolers while matching the cooling of good air towers and adding cleaner socket clearance and ARGB lighting. Spread over a typical three-year build life, that works out to about KSh 15 per day for steady CPU temperatures. Kenyan builders choose it for the copper base, quiet fans, and easy setup. Mascom backs every unit with warranty and after-sales support, which cheaper grey-market coolers rarely offer.
Technical Specifications
Cooling Hardware and Radiator Design
- 240mm aluminium radiator handles Core i5/i7 and Ryzen 5/7 loads without thermal throttling
- 27mm radiator thickness fits most mid-tower cases while keeping strong surface area for airflow
- 20 fins-per-inch layout widens the cooling surface so heat leaves the loop faster under load
- 12 widened water channels raise coolant flow by around 25% for quicker heat transfer
- Split-flow radiator separates hot and cooled water into two paths for steadier temperatures
- Total 57mm height with fans mounted; confirm case radiator clearance before install
Pump, Copper Base, and Coolant Loop
- Three-phase pump spins up to 3800 RPM to move coolant quickly across the radiator
- Ceramic pump bearings cut vibration and noise while extending the pump's working life
- Full copper cold plate makes direct contact with the CPU to pull heat off fast
- 0.1mm micro-channel base design speeds heat absorption from the processor surface
- Screw-free copper base improves water-tightness and lowers the risk of coolant leaks
- 390mm nylon-braided EPDM tubes resist evaporation, corrosion, and ageing over years of use
CycloBlade 7 Fans and Airflow
- Two 120mm CycloBlade 7 fans push around 62 CFM of air through the radiator fins
- Hybrid blade shape raises static pressure so air pushes through dense radiator fins effectively
- Rifle bearings run near 30 dBA, keeping noise low even during long gaming sessions
- PWM control lets the fans idle low and ramp up only when the CPU heats up
- Pre-installed fans arrive attached to the radiator, cutting cable clutter during assembly
- Ring-blade design focuses airflow toward the fin stack and trims turbulence noise
Socket Compatibility and Fit
- Supports Intel LGA 1700 and LGA 1851 covering 12th, 13th, 14th, and Core Ultra chips
- Supports AMD AM5 and AM4 covering Ryzen 5000, 7000, and 9000 desktop processors
- Intel mounting bracket comes pre-installed to shorten setup time for new builders
- AMD bracket and all mounting screws are included in the retail box
- Thermal paste is supplied, so no separate purchase is needed for first installation
- Confirm case width and radiator mount points at Mascom before buying to avoid fit issues
ARGB Lighting and Software Control
- ARGB GEN2 addressable lighting offers 16.8 million colors across the pump top
- MSI Center and Mystic Light give full color and effect control on MSI motherboards
- Standard 5V 3-pin header syncs with Aura Sync, RGB Fusion, and Polychrome boards
- Indirect lighting sits within the curved cover for a softer glow rather than harsh spots
- Replaceable top cover lets you swap the look without changing the whole cooler
- Free 3D-print file from MSI lets you make a custom cover to match your build
Build Quality and Installation
- Aluminium radiator and copper base give the cooler solid long-term durability
- EZ Connect single-cable routing replaces the three or four cables older coolers required
- Flexible tubing lets the pump cover face forward whatever direction the outlet points
- MAG-series build targets long daily use for gaming and creator workstations
- Included manual guides orientation and mounting for first-time PC builders in Kenya
- Available in black and white to match dark or light-themed builds
What's in the Box
The MSI MAG CORELIQUID A13 240 retail box includes the pump-and-radiator unit with the two 120mm CycloBlade 7 fans pre-installed, the pre-fitted Intel LGA 1700/1851 mounting bracket, the AMD AM5/AM4 bracket, a full set of mounting screws and standoffs, a tube of thermal paste, the ARGB and PWM connection cables, and the printed user manual. No separate thermal compound purchase is needed. Mascom International confirms every box is complete and sealed before dispatch.
Warranty and Support
Mascom International backs the MSI MAG CORELIQUID A13 240 with a 12-month warranty covering the pump, fans, and manufacturing defects under normal use. Our Nairobi CBD service desk handles any warranty claim directly, so you deal with a local store rather than an overseas seller. Buyers across Kenya rely on Mascom International for honest specifications and genuine stock on every PC cooling component we carry.
Where to Buy the MSI MAG CORELIQUID A13 240 in Kenya
The MSI MAG CORELIQUID A13 240 is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit our store Monday through Saturday, 9:00 AM to 7:00 PM, to see the cooler in person and confirm it fits your case before purchase. Available colors: black and white.
Order through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the MSI MAG CORELIQUID A13 240 across all 47 Kenyan counties with pay-on-arrival delivery, so you only pay when the cooler reaches you. Nairobi and its environs receive same-day delivery, while Mombasa, Kisumu, Nakuru, and Eldoret get the cooler within 1 business day. Counties including Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Our Nairobi CBD service desk handles after-sales support directly. PC builders throughout Kenya count on Mascom International for accurate specifications, current pricing, and reliable warranty backing on every cooling component we stock.
