MSI MAG CORELIQUID A15 240 is now available at Mascom International for KSh 17,000, bringing a 240mm all-in-one liquid cooler with two 120mm CycloBlade 9 ARGB fans, a 3400 RPM pump, and a full-copper contact base to Kenyan PC builders. This 240mm AIO cooler fits Intel LGA 1700 and LGA 1851 boards alongside AMD AM5 and AM4 sockets through a pre-installed UNI Bracket. Mascom International stocks the MSI MAG CORELIQUID A15 240 at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, ready for same-day pickup or countrywide pay-on-arrival delivery to all 47 counties.
Built for gamers, video editors, and 3D artists across Nairobi who run Intel Core Ultra or AMD Ryzen chips that throttle under stock air coolers, the MSI MAG CORELIQUID A15 240 pulls heat away from the processor before clock speeds drop. Nairobi's warm afternoons and enclosed apartment setups in Kilimani and Roysambu push case temperatures higher than a bulky tower cooler can handle during long rendering exports or ranked matches. The 240mm radiator and split-flow water path move that heat out quietly, so Warzone, Fortnite, or Premiere Pro workloads hold steady frame rates and export times without thermal throttling interrupting your work.
Unlike other electronics retailers in Kenya that stock unbranded coolers with no warranty backing, Mascom International supplies the genuine MSI MAG CORELIQUID A15 240 with local after-sales support from our Nairobi CBD desk. Builders across Kenya tell us they pick this 240mm AIO for its two-cable routing and metal backplate over fiddlier budget units. At Mascom International, we're seeing more Kenyan gamers move from air towers to liquid cooling as Core Ultra and Ryzen 7 builds become common. Walk into our Kimathi Street store to inspect the MSI MAG CORELIQUID A15 240 in person, or order it for delivery.
Common Questions About the MSI MAG CORELIQUID A15 240 Cooler
What CPUs does the MSI MAG CORELIQUID A15 240 cool best?
The MSI MAG CORELIQUID A15 240 handles current mid-range and high-end desktop chips, including Intel Core Ultra 5, 7, and 9 processors and AMD Ryzen 5, 7, and 9 parts. A bundled offset kit shifts the pump block toward the hotspot on Intel Core Ultra chips, using screw position 2 for Ultra 9 and 7 and position 1 for Ultra 5. This targeted contact keeps a 65W to 150W CPU below throttling temperatures during gaming and content work, letting your processor hold boost clocks instead of stepping down under sustained load.
Is a 240mm AIO enough for gaming in Kenya's warm climate?
Yes. A 240mm radiator with two 120mm fans clears the heat from mainstream gaming and editing builds, even in Nairobi's warmer months and poorly ventilated rooms. The two CycloBlade 9 fans push 64.9 CFM of airflow through a 27mm-thick aluminium radiator carrying 20 fins per inch, which spreads heat across a wide surface for the fans to remove. For a Core Ultra 7 or Ryzen 7 gaming rig running Valorant, Call of Duty, or Fortnite for hours, this keeps temperatures stable without the size and clearance headaches of a 360mm unit.
How loud is the MSI MAG CORELIQUID A15 240?
The MSI MAG CORELIQUID A15 240 stays quiet during normal use. The pump runs at up to 3400 RPM with ceramic bearings rated near 20 dBA, a low hum most users never notice over case airflow. The two CycloBlade 9 fans spin up to 2050 RPM and top out around 28.7 dBA at full speed, roughly the level of a quiet library. Through MSI Center software you set custom fan and pump curves, so the cooler idles near-silent during browsing and ramps up only when a game or render pushes the processor.
Is the MSI MAG CORELIQUID A15 240 hard to install?
No. The pre-installed UNI Bracket and pre-mounted fans cut assembly down to two cables instead of the four older AIOs demanded. You fit the metal backplate, screw the standoffs, seat the pump block, and mount the radiator with the supplied screws. Thermal paste comes pre-applied, so first-time builders skip that step. Cables run through standard 4-pin PWM and 3-pin ARGB V2 headers on any motherboard, or through MSI's single JAF_1 header on compatible MSI boards for tidier routing. Most builders finish mounting in under 20 minutes.
Will the MSI MAG CORELIQUID A15 240 fit my PC case?
The 240mm radiator fits any case rated for a 240mm or 280mm radiator mount, which covers most mid-tower and full-tower cases sold in Kenya. The radiator measures roughly 274mm long, 120mm wide, and 27mm thick, with 390mm nylon-braided tubes that reach top or front mounting points comfortably. Before buying, check your case spec sheet for 240mm radiator support at the top or front panel. The thin 27mm radiator leaves room for RAM and airflow clearance that thicker units sometimes block, making it a safe fit for compact builds too.
Is the MSI MAG CORELIQUID A15 240 worth KSh 17,000 over an air cooler?
For a build running a Core Ultra 7, Ryzen 7, or hotter chip, yes. A good air tower struggles to clear 200W-class heat quietly, and it blocks tall RAM and top PCIe slots. At KSh 17,000, the MSI MAG CORELIQUID A15 240 gives you liquid cooling headroom, ARGB GEN2 lighting, and a metal backplate for less than many single-tower air coolers plus fans. Spread over a three-year build life, that works out to roughly KSh 16 per day for stable temperatures, quieter fans, and cleaner cable management inside the case.
Why buy the MSI MAG CORELIQUID A15 240 from Mascom International?
Mascom International sells the genuine, MSI-sourced MSI MAG CORELIQUID A15 240, not a grey-import unit with no support. You can walk into our Kimathi Street store, hold the cooler, and check the fans and pump before paying. Unlike anonymous online sellers who vanish after an M-Pesa payment, Mascom operates a registered Nairobi CBD store with a service desk that handles warranty claims directly. Countrywide pay-on-arrival delivery means you inspect the sealed box and pay only when it reaches you, whether you are in Nairobi, Nakuru, Kisumu, or Eldoret.
Technical Specifications
Pump and Cooling Hardware
- Three-phase pump runs up to 3400 RPM with ceramic bearings for steady coolant flow and long service life
- Full-plane copper contact base drops the older screw-hole design, improving water-tightness and heat pickup from the CPU lid
- 0.1mm micro-channel design across the base absorbs processor heat quickly for the pump to move into the loop
- 12 widened water channels increase coolant flow by around 25 percent over the previous generation for better heat transfer
- Pump noise rated near 20 dBA at full speed, low enough that most users never hear it over case fans
- Adjustable offset kit offers two positions to align the block over the hotspot on Intel Core Ultra chips
Radiator and Fan Airflow
- 240mm aluminium radiator holds 27mm thickness, staying slim enough for RAM and top-panel clearance in compact cases
- Radiator carries 20 fins per inch, expanding cooling surface area for stronger heat removal under gaming and rendering loads
- Split-flow design divides hot inbound and cooled outbound coolant into two 6-channel paths for better dissipation
- Two 120mm CycloBlade 9 fans deliver 64.9 CFM of airflow to push air through the dense radiator fins
- Fans spin up to 2050 RPM and stay near 28.7 dBA at full speed, close to a quiet room
- Rifle-bearing fans reduce running noise and extend fan lifespan compared with cheaper sleeve-bearing units
- PWM control lets the motherboard scale fan speed to temperature so the cooler stays quiet at idle
Socket Compatibility and Mounting
- Pre-installed UNI Bracket supports Intel LGA 1700 and LGA 1851 boards straight out of the box
- Intel support also covers LGA 1150, 1151, 1155, 1156, and 1200 sockets for older builds
- AMD support covers AM5 and AM4, plus legacy AM3, AM2, and FM series sockets for reuse
- Metal backplate spreads mounting pressure evenly and resists bending under the offset kit during heavy loads
- Thermal paste is included and pre-applied to the copper base, saving first-time builders a separate step
- Cross-pattern nut tightening gives even contact pressure between the block and processor for consistent temperatures
Lighting and Software Control
- ARGB GEN2 lighting runs across the pump head and both fans for a matched glow inside the case
- MSI Mystic Light supports 16.8 million colours and multiple effects controlled through one software panel
- MSI Center software sets custom fan and pump curves so cooling scales to your actual workload
- Lighting connects through a standard 3-pin ARGB V2 header compatible with most current motherboards
- Mystic Light syncs the cooler with other ARGB parts like RAM, fans, and strips from major brands
- Software control needs no MSI motherboard, though MSI boards add the single-cable JAF_1 option
Tubing and Build Durability
- 390mm nylon-braided EPDM rubber tubes resist heat, cold, corrosion, and ageing over years of use
- Braided sleeving over the tubing reduces coolant evaporation to keep the closed loop topped up longer
- Flexible tubes route cleanly to top or front radiator mounts without kinking or fighting the case
- Full-plane copper base seals without screw perforations, lowering the long-term risk of coolant seepage
- Military-styled pump cover pairs a painted finish with brushed aluminium accents for a tidy build look
- Closed-loop design needs no refilling or maintenance across the working life of the cooler
Installation and Cable Management
- Pre-installed fans and UNI Bracket cut setup to two cables instead of the four older AIOs required
- Hidden daisy-chain fan connectors keep wiring out of sight so the fan design stays clean
- Standard 4-pin PWM and 3-pin ARGB headers work with any motherboard brand, not only MSI
- MSI JAF_1 header combines fan and lighting control into one cable on compatible MSI boards
- EZ Conn cable converts the JAF header into extra ARGB and fan headers when more are needed
- Four-pin pump connector lets you adjust pump speed directly from the motherboard for fine tuning
Package Contents
The MSI MAG CORELIQUID A15 240 retail box from Mascom International contains the pump block and 240mm radiator with both 120mm CycloBlade 9 fans pre-installed, the Intel and AMD mounting hardware including the UNI Bracket, metal backplate, standoffs, screws, and nuts, the LGA 1851 offset kit, pre-applied thermal paste on the copper base, the ARGB and PWM cabling with EZ Conn cable, and the installation guide. Available in Black.
Warranty
The MSI MAG CORELIQUID A15 240 carries a 6-month Mascom International warranty on manufacturing defects under normal use, alongside MSI's own manufacturer warranty support. Our Nairobi CBD service desk handles claims directly without requiring you to ship the unit abroad. Pump leaks, dead fans, and lighting faults under normal operation fall within coverage.
Where to Buy the MSI MAG CORELIQUID A15 240 in Kenya
The MSI MAG CORELIQUID A15 240 is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit our store Monday through Saturday, 9:00 AM to 7:00 PM, to inspect the MSI MAG CORELIQUID A15 240 and check the fans, pump, and tubing in person before purchase. Available in Black.
Order through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the MSI MAG CORELIQUID A15 240 across all 47 Kenyan counties with pay-on-arrival delivery, so you only pay when the cooler reaches you. Nairobi and its environs receive same-day delivery, while Mombasa, Kisumu, Nakuru, and Eldoret receive the cooler within 1 business day. Locations including Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days. You inspect the sealed box and confirm the contents before completing payment.
Our Nairobi CBD service desk handles after-sales support directly. Buyers across Kenya rely on Mascom International for honest specifications, accurate Kenyan pricing, and reliable warranty backing on every cooler and PC component we stock.