Payment Methods
1. Lipa Na M-PESA
Paybill No.: 5450522
Account No.: M
2. Cash on delivery
3. Cash on collection
MSI MAG CoreLiquid A13 240 | White | 240mm AIO Liquid Cooler | Dual 120mm ARGB Fans | LGA 1851 and AM5
A frost-coloured pick for bright matching PC setups, with chained blowers that cut cable clutter behind the motherboard.
Condition: New
Note: price and availability are subject to change without prior notice
MSI MAG CoreLiquid A13 240 is available at Mascom International for KSh 16,000, brand new and sealed, in a white finish with two 120mm ARGB PWM fans and a 240mm aluminium radiator. The MSI MAG CoreLiquid A13 240 is an all-in-one (AIO) liquid CPU cooler, which means the pump, tubing and radiator arrive filled and sealed, so there is no coolant to top up. It fits Intel LGA 1700 and LGA 1851 boards plus AMD AM4 and AM5 boards. You can see it at our store in the Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD.
Built for PC gamers, streamers, video editors and developers across Kenya, the MSI MAG CoreLiquid A13 240 takes heat off the processor faster than most stock air coolers. That matters on a warm Nairobi afternoon, when a closed room pushes CPU temperatures up and the chip slows itself down to stay safe. The fans run from 500 RPM at idle to 2050 RPM under load, so the machine stays quiet while you browse and only spins up for a long game or a render. The white fans and pump block also suit builders planning an all-white case with matching lighting.
Where most Nairobi electronics shops sell coolers in a box with no advice, Mascom International helps you check case clearance and socket fit for the MSI MAG CoreLiquid A13 240 before you pay. At Mascom International, we're seeing more first-time builders choose a 240mm AIO over a large tower air cooler because it leaves room around the memory slots and looks cleaner through a glass side panel. Customers across Nairobi tell us the pre-installed, daisy-chained fans on the MSI MAG CoreLiquid A13 240 make cable work far easier. Walk in to see it lit up, or order on WhatsApp for pay-on-arrival delivery anywhere in Kenya.
Common Questions About the MSI MAG CoreLiquid A13 240
How much is the MSI MAG CoreLiquid A13 240 White in Kenya?
The MSI MAG CoreLiquid A13 240 White costs KSh 16,000, brand new and sealed, at Mascom International in Nairobi CBD. That price covers the full cooler with two pre-installed 120mm ARGB fans, thermal paste and mounting screws, plus a 12-month warranty against manufacturing defects. Delivery is pay-on-arrival across Kenya, so you pay only once the box is in your hands. The A15 240 in black costs KSh 17,000, and the 360mm A13 360 sits at KSh 18,000, a KSh 2,000 step up from this unit.
Is the MSI MAG CoreLiquid A13 240 or the A15 240 the better buy?
The MSI MAG CoreLiquid A13 240 is the better buy for a white build, while the A15 240 suits a black build that wants slightly more airflow. The A13 240 costs KSh 16,000 and the A15 240 costs KSh 1,000 more. MSI rates the A15 240 fans at 64.89 CFM against 62.6 CFM here, a small gap most users will not feel in daily gaming. Both share the same 240mm radiator footprint, the same 500 to 2050 RPM fan range and the same socket support. Choose on colour first, then budget.
Will the MSI MAG CoreLiquid A13 240 cope with dust and KPLC power cuts?
The MSI MAG CoreLiquid A13 240 copes well, provided you keep the radiator fins clean. Dust is the main enemy of any cooler in Kenya: in Industrial Area, Eldoret or a ground-floor room facing a busy road, blow out the fins every two to three months with compressed air. A KPLC power cut does not harm the cooler, because the pump simply stops when the PC shuts down. For a gaming rig, we still suggest a UPS so a sudden blackout does not corrupt a game save or an unsaved project.
Which processors suit the MSI MAG CoreLiquid A13 240?
The MSI MAG CoreLiquid A13 240 mounts on Intel LGA 1700 and LGA 1851 boards and AMD AM4 and AM5 boards. That covers Intel 12th, 13th and 14th Gen Core chips, Intel Core Ultra 200S desktop chips, AMD Ryzen 5000 and older AM4 chips, and Ryzen 7000 and 9000 desktop processors. A 240mm radiator is a common pick for Core i5, Ryzen 5 and many Core i7 or Ryzen 7 gaming builds. Bring your motherboard model to Mascom International and we will confirm the fit before you pay.
Who should buy the MSI MAG CoreLiquid A13 240, and who should skip it?
The MSI MAG CoreLiquid A13 240 suits gamers, streamers and students at Strathmore, JKUAT or USIU building a white midrange PC around a Core i5, Core i7, Ryzen 5 or Ryzen 7. Skip it if you run a Core i9 or Ryzen 9 through long renders; the A13 360 at KSh 18,000 adds a third fan and more radiator area for that heat. Skip it too if your case has no 240mm mounting spot at the top or front, or if you want a black build, where the A15 240 fits better.
Does the MSI MAG CoreLiquid A13 240 need software to control the lighting?
No, the MSI MAG CoreLiquid A13 240 lights up without software once it is plugged into a 5V ARGB header on the motherboard. ARGB Gen2 means each LED is addressed separately, so colours can flow across the fans and the pump block. With an MSI board, MSI Mystic Light lets you set colours and effects and sync them with your RAM and case fans. Boards from other makers can drive it through their own ARGB tools. If you only want the white look, set every LED to plain white and leave it.
How hard is it to install the MSI MAG CoreLiquid A13 240 yourself?
Installing the MSI MAG CoreLiquid A13 240 is a manageable job for a first-time builder with a Phillips screwdriver. The two fans come pre-installed and daisy-chained, so you mount the radiator, fix the pump block over the CPU and run fewer cables back to the motherboard. Apply the included thermal paste first. Mount the radiator at the top or front of the case so the pump never sits at the highest point of the loop. Bring your case to our Kimathi Street store if you want us to check clearance with you.
Is the MSI MAG CoreLiquid A13 240 loud?
The MSI MAG CoreLiquid A13 240 stays quiet during everyday work because its PWM fans can idle as low as 500 RPM. PWM (pulse width modulation) lets the motherboard raise or lower fan speed with temperature, so the fans only climb toward 2050 RPM in a long game or a big video export. The CycloBlade 7 fan design uses seven blades shaped to push air through the dense radiator fins. In a study room in Kilimani or Westlands, a gentle BIOS fan curve keeps the PC hushed.
Technical Specifications
Core Function and Cooling Performance
- 240mm all-in-one liquid CPU cooler — a sealed loop of pump, tubing and radiator that never needs refilling, draining or coolant top-ups during its life.
- Two 120mm ARGB PWM fans spinning from 500 to 2050 RPM — close to silent at idle, then faster only when the processor heats up under load.
- Airflow of up to 62.6 CFM per fan — CFM (cubic feet per minute) measures how much air each fan pushes through the radiator every minute.
- CycloBlade 7 fan design with seven blades — shaped to drive air through the tightly packed radiator fins, where the coolant gives up its heat.
- PWM fan control from the motherboard — the BIOS can set a fan curve that stays quiet for browsing and spins up for gaming or rendering.
Compatibility and Mounting
- Intel LGA 1700 and LGA 1851 support — covers 12th, 13th and 14th Gen Core desktop chips plus the Core Ultra 200S desktop range.
- AMD AM4 and AM5 support — fits Ryzen 5000 and older AM4 processors as well as Ryzen 7000 and 9000 desktop processors on AM5 boards.
- Radiator size 277 × 119.6 × 27.2 mm — needs a case with a 240mm radiator mount on the top panel or the front panel.
- Radiator and fans together measure about 52mm thick — check clearance above the motherboard's top edge and the memory sticks before choosing a top mount.
- 5V ARGB 3-pin lighting connection — plugs into the addressable RGB header found on most current motherboards; never connect it to a 12V RGB header.
Build and Materials
- Aluminium radiator — light, thin fins that spread the heat carried by the coolant into the air the two fans push through them.
- Copper cold plate on the pump block — the base that touches the processor, chosen because copper conducts heat faster than aluminium does.
- Factory-filled, sealed loop — the tubes arrive already attached to the radiator and pump block, so there is no drilling, filling or bleeding.
- Standard 120mm fan frames — any common 120mm fan fits the radiator later if you ever want to swap one out after the warranty.
- White colourway on the fans and pump block — matches white cases, white memory and white motherboards for a clean light-themed build.
Inclusions and Lighting Control
- ARGB Gen2 lighting on the fans and pump block — each LED is addressed separately, so colours can flow, pulse or hold steady together.
- MSI Mystic Light compatible — on an MSI motherboard, one app syncs the cooler with memory, case fans and LED strips in the same PC.
- Works with other 5V ARGB boards — motherboards from other makers drive the lighting through their own software, so no MSI board is required.
- Pre-installed daisy-chain fans — the fans link to each other on the radiator, so fewer cables run back to the motherboard headers.
- Thermal paste and mounting screws in the box — the paste covers the first install, and the screws fix the radiator and fans to the case.
Package Contents
The MSI MAG CoreLiquid A13 240 arrives brand new and sealed in MSI retail packaging. Inside is the 240mm radiator with its two 120mm ARGB fans already fitted and daisy-chained, and the pump block with its copper cold plate, joined to the radiator by the tubing. MSI also packs a tube of thermal paste and a set of mounting screws. There is no wall plug or adapter, because the cooler draws its power from your motherboard headers. Ask us on WhatsApp if you want the box opened and checked before delivery.
Warranty
The MSI MAG CoreLiquid A13 240 ships with a 12-month warranty through Mascom International, covering manufacturing defects under normal use. That covers factory faults in the pump, fans and lighting. Claims are handled at our Nairobi CBD service desk in the Old Mutual Building on Kimathi Street, so bring the cooler and your receipt.
Where to Buy the MSI MAG CoreLiquid A13 240 in Kenya
The MSI MAG CoreLiquid A13 240 is in stock at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. We open Monday through Saturday, 9:00 AM to 7:00 PM, and you are welcome to walk in, see the fans lit up on the counter and hold the radiator against your case measurements. This unit comes in white; if your build is black, ask about the A15 240 and the A13 360 in the same range.
Message or call our team before you visit or order:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
We deliver with pay-on-arrival to all 47 counties, and you can settle by M-Pesa or cash when the parcel reaches you. Nairobi and its environs get same-day delivery, while builders in Mombasa, Kisumu, Nakuru and Eldoret receive their order within one business day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days. Your purchase is backed by the 12-month warranty above.
We give honest specifications, accurate pricing and real after-sales support, so you know exactly what you are fitting into your PC and who to call if anything goes wrong.
Disclaimer: We can not guarantee that the information on this product is 100% correct
SOCIAL MEDIA