MSI MAG CoreLiquid A15 360 | Black | 360mm AIO Liquid Cooler | Triple 120mm ARGB Fans | LGA 1851 and AM5

Lower temperatures for eight-core chips, even on stuffy February evenings.


Condition: New




Note: price and availability are subject to change without prior notice



MSI MAG CoreLiquid A15 360 is available at Mascom International for KSh 18,000, brand new and sealed, in black. This 360mm all-in-one liquid CPU cooler pairs an aluminium radiator with a copper cold plate and three pre-installed 120mm ARGB fans that spin from 500 to 2050 RPM. It fits Intel LGA 1700 and LGA 1851 boards plus AMD AM4 and AM5 boards, so it suits both current and last-generation builds. You can see the MSI MAG CoreLiquid A15 360 at our store on the first floor of Old Mutual Building, Kimathi Street, in Nairobi CBD.

Built for PC gamers, video editors, 3D designers and developers across Kenya, the MSI MAG CoreLiquid A15 360 deals with the heat that modern processors throw off under load. A Core i7 or Ryzen 7 chip on a basic air cooler can run hot in a Nairobi room on a February afternoon, and then it slows itself down to stay safe. A 360mm radiator spreads that heat across three fans, so the chip holds its speed through long gaming nights or a full render. Hidden daisy-chain cabling means fewer wires to route, which keeps the build tidy.

Where most Nairobi electronics shops sell coolers in a sealed box with no advice, Mascom International checks your socket, case and radiator space before you pay. Customers across Nairobi tell us the hardest part of an AIO upgrade is knowing whether it will fit, so we answer that on WhatsApp first. The MSI MAG CoreLiquid A15 360 also works with MSI Mystic Light for synced lighting. Visit the store to see the MSI MAG CoreLiquid A15 360 in hand, or order it with pay-on-arrival delivery to any of Kenya's 47 counties.

Common Questions About the MSI MAG CoreLiquid A15 360

How much is the MSI MAG CoreLiquid A15 360 in Kenya?
The MSI MAG CoreLiquid A15 360 costs KSh 18,000 brand new at Mascom International in Nairobi CBD. That price covers the cooler with its three pre-installed ARGB fans, the adjustable CPU offset kit and the metal backplate, plus a 12-month Mascom International warranty. Delivery is pay-on-arrival, so you pay only when the box is in your hands. If your case only takes a 240mm radiator, the MSI MAG CoreLiquid A15 240 sells at KSh 17,000, which is KSh 1,000 less.

Which is better, the MSI MAG CoreLiquid A15 360 or the MSI MAG CoreLiquid A15 240?
The MSI MAG CoreLiquid A15 360 suits hotter processors, while the A15 240 suits smaller cases and costs KSh 1,000 less at Mascom International. The 360 carries three 120mm fans on a longer radiator, so it moves more heat at the same fan speed and can stay quieter under heavy load. The 240 uses two fans and needs only a 240mm mounting spot. Pick the 360 for a Core i7, Core i9, Ryzen 7 or Ryzen 9 chip. Pick the 240 for a Core i5 or Ryzen 5 in a compact case.

Will the MSI MAG CoreLiquid A15 360 cope with Nairobi heat, dust and KPLC power cuts?
The MSI MAG CoreLiquid A15 360 handles warm Kenyan rooms well because its 360mm radiator spreads heat across three fans instead of one small heatsink. Dust is the bigger problem: blow out the radiator fins every two or three months, more often if you work near a busy road in Industrial Area. Power cuts do not harm a sealed liquid loop, but a sudden shutdown can still corrupt open files. Pair the PC with a UPS so it shuts down cleanly when KPLC power drops.

Who should buy the MSI MAG CoreLiquid A15 360, and who should skip it?
The MSI MAG CoreLiquid A15 360 is for builders running hot processors with eight cores or more, inside a case with a 360mm radiator mount. Gamers who stream from Kilimani, editors cutting 4K video and mechanical students at JKUAT running simulations all gain from it. Skip it if your case cannot fit a 394mm radiator, or if you run a Core i3 or Ryzen 3 chip, where a good air cooler is enough. Buyers with a compact case are better served by the MSI MAG CoreLiquid A15 240.

Does the MSI MAG CoreLiquid A15 360 fit Intel LGA 1851 and AMD AM5 boards?
Yes, the MSI MAG CoreLiquid A15 360 supports Intel LGA 1700 and LGA 1851 plus AMD AM4 and AM5 sockets. That covers Intel 12th, 13th and 14th Gen Core chips, Core Ultra 200S desktop chips, and AMD Ryzen desktop processors on both AM4 and AM5. An adjustable CPU offset kit lets you shift the cold plate toward the hottest area of the chip. A metal backplate supports the board behind the socket, so the mount stays firm for years.

How loud is the MSI MAG CoreLiquid A15 360?
The MSI MAG CoreLiquid A15 360 fans are rated at up to 28.7 dBA, and the pump is rated at 20 dBA. That is quiet enough for a bedroom, a hostel room or a shared office. On light work the fans can drop to 500 RPM, so typing, browsing and video calls stay close to silent. Under a heavy game they ramp toward 2050 RPM. Set a fan curve in your motherboard BIOS so the cooler only speeds up when the processor actually gets hot.

Is the MSI MAG CoreLiquid A15 360 hard to install?
Installing the MSI MAG CoreLiquid A15 360 is simpler than many liquid coolers because the three fans come already mounted on the radiator. Hidden daisy-chain cabling links the fans to each other, so you run fewer wires to the motherboard. The usual order is to fix the metal backplate behind the socket, mount the radiator in the case, then fit the pump block onto the processor. If you are unsure about your case, bring its model name to Mascom International and we will check the fit with you before you buy.

Can the MSI MAG CoreLiquid A15 360 sync its lighting with my other parts?
Yes, the MSI MAG CoreLiquid A15 360 uses ARGB Gen2 lighting and works with MSI Mystic Light software. On an MSI motherboard you can match colours across the pump block, fans, RAM and case from one app. ARGB means addressable RGB, where each LED can show its own colour, so rainbow and wave effects run smoothly. Content creators in Westlands often set one colour to match their stream branding. If you prefer a dark desk, you can switch the lighting off completely.

Technical Specifications

Core Function and Cooling Performance
  • 360mm all-in-one liquid loop — a sealed, pre-filled system that carries processor heat to the radiator, with no refilling needed.
  • Three 120mm CycloBlade fans spinning from 500 to 2050 RPM — slow and quiet on light work, fast for long gaming sessions.
  • Fan airflow rated at 64.89 CFM — CFM means cubic feet of air per minute, so a higher figure clears heat faster.
  • Static pressure of 2.59 mm H2O — this is the fan's push through dense radiator fins, which matters more than raw airflow.
  • Pump speed of 3,400 RPM — the pump keeps coolant moving between the cold plate and radiator while the PC runs.
  • Noise rated at up to 28.7 dBA for the fans and 20 dBA for the pump — comfortable in a bedroom or office.
  • Fan life rated at 40,000 hours at 40°C — years of daily use before the fan bearings wear out.

Compatibility and Fit
  • Intel LGA 1700 and LGA 1851 support — covers 12th to 14th Gen Core and Core Ultra 200S desktop processors.
  • AMD AM4 and AM5 support — fits Ryzen desktop boards from the AM4 era through current AM5 systems.
  • Radiator size of 394 × 119.6 × 27.2 mm — your case needs a 360mm top or front mount with room for this length.
  • Tubing length of 390mm — enough reach for a front-mounted or top-mounted radiator in a typical mid-tower case.
  • Adjustable CPU offset kit — moves the cold plate slightly so it sits over the hottest part of newer processors.
  • 4-pin PWM fan control — PWM lets the motherboard set fan speed automatically from the processor temperature.
  • MSI lists 360mm front and top radiator support on the MSI MPG Gungnir 300R Airflow, also sold at Mascom International.

Build and Materials
  • Aluminium radiator — light, resistant to corrosion, and quick to shed heat through thin fins along its full length.
  • Copper cold plate with 0.1mm micro-channels — copper draws heat from the chip fast, and fine channels give coolant more surface.
  • EPDM tubing with nylon braid and anti-evaporation design — slows coolant loss over the years and resists kinking during installation.
  • Metal backplate — supports the motherboard behind the socket so the pump block clamps down evenly.
  • Rifle-bearing fans — a bearing type known for running quietly and lasting well in warm rooms.
  • Black finish on the pump block, radiator and fans — suits dark builds and lets the lighting stand out.
  • Hidden daisy-chain fan cabling — the fans link to each other, so only a short cable run reaches the board.

Inclusions and Lighting
  • Three 120mm ARGB fans already mounted on the radiator — less time spent screwing fans into place.
  • ARGB Gen2 lighting on the pump block and fans — addressable LEDs that each show their own colour.
  • MSI Mystic Light compatibility — control colours and effects from one Windows app when paired with an MSI motherboard.
  • Adjustable CPU offset kit in the box — shift the cold plate for better contact on newer chips.
  • Metal backplate included — reinforces the board behind the socket during mounting.
  • Pre-filled coolant — no filling or bleeding air before first use, so the cooler is ready out of the box.

Package Contents
The MSI MAG CoreLiquid A15 360 arrives brand new and sealed, with the radiator, pump block and braided tubing joined as one ready unit. Its three 120mm ARGB fans come already mounted on the radiator and linked by hidden daisy-chain cabling. The box also holds the adjustable CPU offset kit and the metal backplate. If you need the full list of screws and brackets before ordering, ask us on WhatsApp and we will check the box for you.

Warranty
The MSI MAG CoreLiquid A15 360 ships with a 12-month warranty through Mascom International, covering manufacturing defects under normal use. That includes pump faults, fan failures, lighting faults and leaks caused by a manufacturing defect. Claims are handled at our service desk in Old Mutual Building, Nairobi CBD, so bring the cooler and your receipt.

Where to Buy the MSI MAG CoreLiquid A15 360 in Kenya
The MSI MAG CoreLiquid A15 360 is in stock at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. We open Monday through Saturday, 9:00 AM to 7:00 PM. Come in to see the black finish and the lighting running before you buy, and bring your case model so we can confirm the radiator fit.
Reach our team on any of these channels:
  • Phone/WhatsApp: +254 708 852 521
  • Email: info@mascomintl.com
  • Website: www.mascomintl.com
We deliver pay-on-arrival to all 47 counties. Nairobi and its environs get same-day delivery, while Mombasa, Kisumu, Nakuru, Eldoret and other major towns receive orders the next business day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days. You can pay with M-Pesa or cash when the parcel reaches you.
Every unit is backed by the 12-month warranty above. We give honest specifications, accurate pricing and real after-sales support, so you know exactly what goes into your build.


Disclaimer: We can not guarantee that the information on this product is 100% correct


SOCIAL MEDIA
Customer Support
×

Hello! 👋
How can we help you today?