TP-Link Omada SG2428P sells for KSh 34,500 at Mascom International, brand new and sealed. It packs 24 gigabit PoE+ ports and four gigabit SFP fibre slots into one 19-inch rack unit. A shared 250W power budget runs IP cameras, ceiling access points and VoIP phones through the same Ethernet cable that carries their data. The TP-Link Omada SG2428P also plugs into TP-Link's Omada platform, so the switch, access points and gateway sit on one dashboard. Pick it up at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, or order it for delivery anywhere in Kenya.
Built for IT managers, security installers and facilities teams running whole buildings, the TP-Link Omada SG2428P replaces a tangle of power adapters. Most offices wire ceiling access points and corridor cameras to wall sockets that rarely sit where the devices do. With PoE, one cable from the server room does both jobs, and one UPS protects every powered device at once. Hotel managers in Diani and Naivasha, school bursars, hospital administrators and property managers in Westlands and Kilimani use it to run guest Wi-Fi, CCTV and office traffic on separate VLANs without buying three switches.
Where most Nairobi electronics shops push unmanaged PoE boxes with no traffic control, Mascom International stocks the TP-Link Omada SG2428P for buyers who need visibility and security. You get VLANs, access control lists, QoS priority for voice and remote management through the Omada app. Installers across Nairobi tell us the single-dashboard setup cuts their site visits, because firmware updates and port resets happen remotely. Our team can match the TP-Link Omada SG2428P with EAP access points and cabling in one order. Walk into our Kimathi Street store to see the unit, or order on WhatsApp for pay-on-arrival delivery.
Common Questions About the TP-Link Omada SG2428P
Is the TP-Link Omada SG2428P worth KSh 34,500 for a Kenyan business?
Yes, for any site running more than ten powered devices, the TP-Link Omada SG2428P works out at about KSh 1,230 per port. That price covers PoE power, gigabit speed and full web and app management on every copper port. Buying a basic 24-port switch plus separate PoE injectors for each camera costs more and creates more failure points. Spread over five years of service, the switch costs roughly KSh 19 a day at Mascom International, less than a single boda boda ride across Nairobi CBD.
Why choose the TP-Link Omada SG2428P over the smaller TP-Link SG2210P?
Choose the TP-Link Omada SG2428P when you have more than eight powered devices or plan to grow. The SG2210P gives you eight PoE+ ports and two SFP slots for KSh 14,500, about KSh 1,812 per PoE port. The SG2428P gives you 24 PoE+ ports and four SFP slots for KSh 34,500, about KSh 1,438 per PoE port. The extra KSh 20,000 buys triple the powered ports, twice the fibre uplinks and a rack-mount chassis. Buying three SG2210P units instead would cost KSh 43,500.
How many CCTV cameras and access points can the SG2428P power at once?
The TP-Link Omada SG2428P can power all 24 ports together when each device draws about 10W or less, since 24 x 10W equals 240W. Each port supplies up to 30W under the 802.3at PoE+ standard. If every device pulled that full 30W, the 250W budget would cover eight of them. In practice, a typical mix of dome cameras, ceiling access points and desk phones draws well under that 30W ceiling. Check each device's rated wattage before planning a full 24-port install.
Does the TP-Link Omada SG2428P cope with Kenyan power cuts and surges?
The TP-Link Omada SG2428P carries 6kV surge protection and accepts 100-240V AC input, so normal KPLC voltage swings stay within range. Power cuts are a different problem, and no switch rides through them alone. Place the SG2428P on a UPS and every PoE camera and access point stays live with it, because they all draw power through the switch. One UPS in the server room then protects your whole CCTV system during an outage, instead of a battery at every camera.
Can I manage the TP-Link Omada SG2428P from my phone?
Yes, the TP-Link Omada SG2428P is fully manageable through the Omada app once you add it to an Omada controller. The controller can be a hardware OC200, OC300, software on a PC, or TP-Link's cloud-based controller. From the app you see which ports are powering devices, restart a frozen camera by cycling its PoE, and push firmware updates. Without a controller, the switch still runs standalone through its own web page or a Telnet command line.
How does the TP-Link Omada SG2428P compare with Cisco and UniFi PoE switches?
The TP-Link Omada SG2428P gives you similar managed Layer 2 features to Cisco Business and Ubiquiti UniFi 24-port PoE switches, usually at a lower price in Kenya. Its real advantage is the Omada platform, which ties the switch to TP-Link EAP access points and gateways under one free controller. UniFi offers a comparable single-dashboard system but needs UniFi gear throughout. Cisco suits firms already standardised on Cisco. For a mixed small-business site, the SG2428P gives more PoE ports per shilling.
Who should buy the TP-Link Omada SG2428P, and who should skip it?
Buy the TP-Link Omada SG2428P if you run a hotel, school, clinic, warehouse or office floor with 10 to 24 powered devices and a proper rack. Skip it if you have a home, a small shop or fewer than eight cameras. For those setups the SG2210P covers the job for KSh 14,500. If you only need more wired desk ports with no PoE or management, the TP-Link TL-SF1024D costs far less at Mascom International.
Is the TP-Link Omada SG2428P noisy, and where should I install it?
The TP-Link Omada SG2428P uses two internal fans to cool its 250W power supply, so expect a steady hum rather than silence. Install it in a server cabinet, comms room or ventilated cupboard, not on a reception desk. It fits any standard 19-inch rack in one unit of height, and it also sits on a shelf with the included rubber feet. Operating temperature runs up to 50°C, which covers hot comms rooms in Mombasa and Kisumu with ordinary airflow.
Technical Specifications
Port Layout and Switching Performance
- 24 gigabit RJ45 ports with auto MDI/MDIX, so any straight or crossover Cat5e or Cat6 cable simply works.
- 4 gigabit SFP slots accept fibre modules for linking buildings, floors or a fibre-fed ISP handover point.
- 56 Gbps switching capacity lets all 28 ports run at full speed together without traffic slowing down.
- 41.66 Mpps packet forwarding rate keeps camera streams and voice calls moving during heavy file transfers.
- 8K MAC address table remembers thousands of connected devices, well above what one building normally needs.
- 9KB jumbo frames speed up large transfers to a network video recorder or file server.
- 4.1 Mbit packet buffer absorbs short bursts of traffic, reducing dropped frames on busy CCTV uplinks.
Power over Ethernet Delivery
- All 24 copper ports follow 802.3af and 802.3at, powering nearly any PoE camera, phone or access point.
- Up to 30W per port covers pan-tilt cameras and Wi-Fi 6 ceiling access points that need extra power.
- 250W total budget is shared across ports, so lower-draw devices leave headroom for heavier ones.
- Remote PoE power cycling restarts a frozen camera from the dashboard, saving a ladder climb or site visit.
- One UPS behind the switch keeps every powered device running through a power cut together.
- PoE removes the need for sockets near ceiling devices, cutting electrician costs on new installations.
Omada Management and Layer 2 Plus Features
- Omada SDN support puts the switch, EAP access points and gateways on one shared management dashboard.
- Zero-touch provisioning through the cloud controller lets an installer configure the switch before it reaches site.
- Up to 4K VLAN groups separate guest Wi-Fi, CCTV and staff traffic so each stays isolated and secure.
- 32 static routes for IPv4 and IPv6 allow basic routing between VLANs without a separate router doing it.
- 8 QoS priority queues give voice calls and camera streams first place ahead of downloads.
- Link aggregation joins several ports into one faster uplink, adding bandwidth plus a backup path.
- Web interface, Telnet command line and SNMP monitoring work even without an Omada controller.
Security Features and Traffic Control
- Up to 230 ACL entries, including time-based rules, block devices or services at set hours of the day.
- 802.1X authentication checks users or devices before a port grants any access to the network.
- DHCP snooping and ARP inspection stop rogue routers and spoofing attempts from hijacking your network traffic.
- IP-MAC binding with up to 512 entries locks a known device to its assigned port and address.
- Storm control limits broadcast floods, so one faulty cable or loop cannot bring the whole network down.
- Port security allows up to 64 MAC addresses per port, blocking unknown laptops plugged into open wall points.
Build Quality and Operating Conditions
- Steel 1U chassis measures 440 x 220 x 44 mm and fits any standard 19-inch network rack.
- Two internal fans cool the power supply, so the unit needs airflow around its sides.
- Operating range of -5°C to 50°C handles warm comms cupboards common in coastal and lakeside towns.
- Operating humidity of 10 to 90 percent non-condensing suits most enclosed server rooms across Kenya.
- 6kV surge protection guards ports and power input against spikes from lightning and unstable supply.
- Physical security lock slot lets you tether the switch against theft in shared or open spaces.
Compatibility and Deployment
- Works with any standards-based PoE device, including Hikvision, Dahua and TP-Link VIGI cameras.
- Pairs with TP-Link EAP access points such as the EAP110 and EAP610 under one Omada controller.
- Accepts TP-Link gigabit SFP fibre modules for runs longer than the 100-metre copper cable limit.
- Internal 100-240V AC supply takes a standard power cord, with no external adapter brick to lose.
- CE and FCC certification confirms the unit meets recognised electrical safety and interference standards.
Package Contents
The TP-Link Omada SG2428P arrives in its sealed TP-Link retail box with everything needed for a rack or shelf install. Mascom International checks every box before dispatch so nothing is missing on arrival.
- TP-Link Omada SG2428P switch unit
- AC power cord
- Rack mounting brackets and screws
- Rubber mounting feet for shelf or desk placement
- Installation guide
Fibre SFP modules and Ethernet patch cables are sold separately at our Kimathi Street store.
Warranty
The TP-Link Omada SG2428P carries a 12-month Mascom International warranty on manufacturing defects. Faults are assessed at our Nairobi CBD service desk, and a confirmed defect is repaired or replaced at no cost to you. Keep your receipt and the original box to speed up any claim.
Buying the TP-Link Omada SG2428P from Mascom International
Mascom International stocks the TP-Link Omada SG2428P in TP-Link's standard black rack chassis at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Come in Monday through Saturday between 9:00 AM and 7:00 PM to inspect the unit and talk through your port plan with our team.
Three ways to order:
- Call/WhatsApp +254 708 852 521
- Email info@mascomintl.com
- Order through www.mascomintl.com
Pay-on-arrival delivery reaches every Kenyan county. Nairobi and its environs receive the TP-Link Omada SG2428P the same day. Mombasa, Kisumu, Nakuru, Eldoret, Nyeri and every other major town receive it within 1 business day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days. You check the switch and pay only when it arrives on site.
Each unit comes with the 12-month Mascom warranty stated above.
Businesses, schools and installers across Kenya rely on Mascom International for accurate networking specifications, fair pricing and direct after-sales help from a real store in Nairobi CBD.
