D-Link DGS-F1210-18PS-E is now in stock at Mascom International, priced at KSh 25,000, brand new and sealed. This 18-port switch carries 16 Gigabit PoE ports, 2 SFP fibre uplinks and a 150W PoE budget under IEEE 802.3af and 802.3at. Its extend mode pushes power and data up to 250 metres over one Ethernet cable, two and a half times the usual 100-metre limit. Installers can inspect the D-Link DGS-F1210-18PS-E at our store in Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, before committing it to a site.
Built for CCTV and IP camera installers, security companies and facility managers across Kenya, the D-Link DGS-F1210-18PS-E solves a stubborn site problem. Perimeter cameras sit on boundary walls, gate posts and car park poles, far from the guardhouse and rarely near a socket. Each one normally needs its own adapter, an extension run or a repeater box. This switch sends power and video down the same cable, so one cabinet feeds every camera. That also means one protected power source to back up, instead of sixteen scattered adapters exposed to weather and tampering. Gated estates in Karen and Runda, petrol stations, warehouses in Industrial Area and apartment blocks all fit this pattern.
Unlike the basic camera switches sold in most Nairobi electronics shops, the D-Link DGS-F1210-18PS-E adds web management, PoE port priority and 6KV lightning protection. The step up to the D-Link DGS-1210-28P costs KSh 43,500 for 24 PoE ports and deeper managed features, which smaller sites rarely use. Security installers across Nairobi tell us that long-range reach removes most repeater boxes from their quotes. Order on WhatsApp for pay-on-arrival delivery, or collect the D-Link DGS-F1210-18PS-E from our Kimathi Street counter the same day, ready for tomorrow's installation.
Common Questions About the D-Link DGS-F1210-18PS-E
Is the D-Link DGS-F1210-18PS-E worth KSh 25,000 in Kenya?
Yes, for any site running eight to sixteen PoE cameras, the D-Link DGS-F1210-18PS-E earns back its KSh 25,000 quickly. That price works out to about KSh 1,563 per PoE port. Each port replaces a separate camera power adapter, a socket near the camera and often an extender on long runs. On a 16-camera estate job, removing those parts shortens installation and cuts future failure points. Mascom International sells it brand new and sealed, with warranty claims handled at our Nairobi CBD desk.
How far can the DGS-F1210-18PS-E carry power to a camera?
The D-Link DGS-F1210-18PS-E reaches up to 250 metres per port with extend mode on, against the standard 100-metre Ethernet limit. You enable it with a DIP switch, so no software is needed. Extend mode trades link speed for distance, which suits cameras streaming video rather than large file transfers. For a gate camera 180 metres from the guardhouse, that means one cable, no repeater and no power point at the gate. Beyond 250 metres, use the SFP ports with fibre instead.
How many IP cameras can the D-Link DGS-F1210-18PS-E power at once?
All 16 ports can power devices at the same time, provided total draw stays within the 150W PoE budget. Spread evenly, that budget gives about 9.4W per port, which covers most fixed dome and bullet IP cameras. PTZ cameras draw more, and 802.3at allows up to 30W on a single port. For example, two PTZ units drawing 25W each leave 100W, about 7.1W for each of the other fourteen ports. Port priority keeps gate and entrance cameras powered first if demand runs tight.
D-Link DGS-F1210-18PS-E vs DGS-1210-28P, which suits a CCTV install?
The D-Link DGS-F1210-18PS-E suits sites with up to 16 cameras and long cable runs, while the DGS-1210-28P suits larger networks. The DGS-1210-28P costs KSh 43,500 for 24 PoE ports, about KSh 1,813 per port, against KSh 1,563 here. Its strength is deeper managed control, which matters where cameras, office PCs and guest Wi-Fi share one building network. For a petrol station forecourt or an apartment perimeter, 250-metre reach usually matters more, and you keep KSh 18,500.
How does the D-Link DGS-F1210-18PS-E handle power cuts and lightning in Kenya?
The D-Link DGS-F1210-18PS-E carries 6KV lightning protection, which matters on outdoor cable runs during the long rains. Because every camera draws power through the switch, one UPS on the switch keeps all 16 cameras recording through a KPLC outage. Size that UPS against the real camera load plus the NVR, not the full 150W budget. The switch accepts 100-240V AC input, so it tolerates voltage swings on estate supplies. Keep it in a ventilated cabinet, since its rated operating range tops out at 40°C.
What are the two SFP ports on the DGS-F1210-18PS-E for?
The two SFP ports on the D-Link DGS-F1210-18PS-E accept fibre modules for links far beyond the 250-metre copper limit. Security companies use one to reach a distant gatehouse, a second building or the far end of a warehouse yard. The other can link back to the office network or a second switch. Glass fibre carries no electrical current, so it also blocks surges between separate buildings. SFP modules and fibre cable are sold separately, so match the module type to your fibre before ordering.
Who should buy the D-Link DGS-F1210-18PS-E, and who should skip it?
Buy the D-Link DGS-F1210-18PS-E if you install or manage 8 to 16 PoE cameras or access points spread across a large compound. Security firms, estate committees, petrol station owners, warehouse managers and apartment caretakers get the most from it. Skip it for a home or small office with no PoE devices, where the D-Link DGS-F108 at KSh 4,800 or the DES-1005C at KSh 2,100 does the job. Sites heading past 24 cameras should consider the DGS-1210-52MP at KSh 77,000 instead.
Is the D-Link DGS-F1210-18PS-E plug and play, or does it need setup?
The D-Link DGS-F1210-18PS-E works out of the box, and most camera installs need no configuration at all. DIP switches handle the common jobs, covering Extend for 250-metre reach, VLAN port isolation, PoE and QoS. A web interface covers the rest, including per-port power limits, port priority and scheduled PoE supply times. Scheduling can switch off office Wi-Fi access points overnight, for example. Your technician can usually finish commissioning on site without opening a laptop, which saves time on busy installation days.
Technical Specifications
Power over Ethernet and Long-Range Reach
- 16 PoE ports under IEEE 802.3af and 802.3at power cameras, access points and IP phones without separate adapters.
- 150W total PoE budget averages about 9.4W per port with all 16 ports loaded at once.
- 802.3at support allows up to 30W on a single port for PTZ and heater-equipped outdoor cameras.
- Extend mode reaches 250 metres per port, two and a half times the standard 100-metre Ethernet distance.
- Port priority keeps critical gate and entrance cameras powered first when total demand nears the budget.
- Scheduled PoE supply times switch devices off automatically, saving power on access points idle overnight.
Port Layout and Uplink Options
- 16 copper RJ45 ports at 10/100/1000 Mbps auto-negotiate speed, so older and newer devices connect cleanly.
- Auto MDI/MDIX on every port accepts straight or crossover cables, avoiding rework on a busy site.
- 2 Gigabit SFP ports accept fibre modules for runs to distant gatehouses and separate buildings.
- RJ45 console port gives direct access for troubleshooting when the web interface cannot be reached.
- LED indicators for Power, SYS, LINK/ACT and PoE show at a glance which camera has dropped.
- Eighteen ports in total leave the two fibre slots free even when all 16 copper ports carry cameras.
Switching Performance
- 36 Gbps switching capacity equals 18 Gigabit ports running full duplex, so no port waits on another.
- 36.8 Mpps forwarding rate handles simultaneous video streams from all 16 cameras without dropped frames.
- 8K MAC address table comfortably covers every camera, NVR, access point and PC on a mid-sized site.
- IEEE 802.3x flow control reduces packet loss when an NVR briefly falls behind incoming camera streams.
- QoS settings let camera video take priority over routine office data sharing the same switch.
- Gigabit uplink to the NVR carries combined footage from all 16 cameras without a bottleneck at the recorder.
Management and Configuration
- DIP switches set VLAN, Extend, PoE and QoS modes by hand, with no laptop needed during installation.
- Web-based management adds per-port power limits, port priority and PoE chip status viewing for technicians.
- PoE status view shows which ports draw power, helping diagnose a failed camera before climbing a ladder.
- Settings live on the switch itself, so camera recording continues through internet outages at the site.
- PoE chip status reporting flags a power fault early, before a blank camera feed gets noticed by guards.
- Standards support for IEEE 802.3, 802.3u, 802.3ab and 802.3z gives clean links with existing network gear.
Protection and Operating Environment
- 6KV lightning protection shields the switch against surges travelling along long outdoor camera cables.
- Operating temperature of 0 to 40°C means mounting it in a shaded, ventilated cabinet on hot sites.
- Operating humidity of 10% to 90% non-condensing suits humid coastal sites, provided the cabinet stays dry.
- 100-240V AC input at 50-60Hz tolerates the voltage swings common on estate and industrial supplies.
- Energy-efficient design keeps electricity costs down on a switch that runs 24 hours a day.
- Central cabinet placement keeps the powered electronics indoors, away from rain and dust at the perimeter wall.
Build and Installation
- Dimensions of 440 x 180 x 44mm give a slim body that fits neatly inside a network cabinet.
- 2.3kg weight suits a wall-mounted cabinet at a gatehouse, guard post or warehouse loading bay.
- One cabinet location feeds all 16 cameras, cutting the number of powered points to maintain on site.
- Works with any IEEE 802.3af or 802.3at camera, including standard PoE models from major CCTV brands.
- Single-cable runs to each camera simplify fault tracing, since power and video follow the same path.
- Fewer adapters at camera positions leave less hardware for thieves or vandals to remove along boundary walls.
Package Contents
The D-Link DGS-F1210-18PS-E arrives brand new and sealed in its D-Link retail box. Inside you get:
- D-Link DGS-F1210-18PS-E switch unit
- AC power cord
- Printed installation guide and warranty documentation
SFP fibre modules, patch cables and a UPS are not included and are purchased separately. Mascom International can quote those items alongside the switch, so your installer receives everything for the job in a single delivery.
Warranty
Mascom International backs the D-Link DGS-F1210-18PS-E with a 12-month warranty covering manufacturing defects under normal use. Claims are handled directly at our Nairobi CBD service desk, where we test the unit and coordinate repair or replacement. Damage from physical impact, water entering the unit or incorrect wiring falls outside warranty coverage.
Where to Buy the D-Link DGS-F1210-18PS-E in Kenya
The D-Link DGS-F1210-18PS-E is available now at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit Monday through Saturday, 9:00 AM to 7:00 PM, to inspect the switch, check the DIP switches and confirm the port layout before your next site survey. It ships in one standard finish.
Order through any of the following:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the D-Link DGS-F1210-18PS-E across all 47 Kenyan counties with pay-on-arrival delivery, so you pay only when the switch reaches you. Nairobi and its environs receive same-day delivery. Nakuru, Eldoret, Kisumu, Mombasa and every other major city and town receive next-business-day delivery. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Each unit is covered by the 12-month warranty above, with claims coordinated at our Nairobi CBD service desk.
Security installers and facility managers across Kenya rely on Mascom International for accurate network specifications, fair pricing and after-sales help from a store they can walk into.
