The HP Spectre 14-es screen replacement is now available at Mascom International for KSh 18,500, a 13.5-inch WUXGA+ 1920x1280 IPS panel with the touch digitizer bonded into a single unit. You will find this HP Spectre 14-es screen replacement in stock at our shop inside Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. The part uses a 30-pin EDP connector, the fitting HP puts on the non-OLED 1920x1280 version of its Spectre x360 14 line. Walk-in installation is available, and Mascom International powers on and checks every HP Spectre 14-es screen before it leaves the counter.
A cracked or black display turns a working 2-in-1 into dead weight, and that is the exact problem this HP Spectre 14-es screen replacement solves. It suits consultants and management staff who present from a folded-back Spectre in Upper Hill boardrooms, architects and product designers who sketch in tablet mode, and lawyers who mark up case files with a fingertip between meetings at Milimani. Because the assembly carries both the picture and the touch layer, one swap brings back the display and the tap-and-swipe input a Spectre owner leans on through a full working day.
Unlike other electronics retailers in Kenya who hand you a bare panel and leave the matching to chance, Mascom International confirms your exact Spectre sub-model, checks the 30-pin versus 40-pin question, and can install the HP Spectre 14-es screen replacement in-store the same day. Users consistently report that a correct 30-pin non-OLED assembly restores both the broken glass and the frozen touch in one fitting. Visit our Kimathi Street counter to watch your laptop tested before you pay, or order the HP Spectre 14-es screen for pay-on-arrival delivery to any of Kenya's 47 counties.
Common Questions About the HP Spectre 14-es screen replacement
Which HP Spectre models does this 30-pin screen fit?
This 30-pin assembly matches the non-OLED, 1920x1280 touch versions of HP's Spectre x360 14 line, covering the 14-ef0xxx, 14-ef1xxx, 14-ef2xxx, and 14t-ef sub-models, and the earlier 14-ea units that shipped with the same IPS panel. The panel is 13.5 inches, which HP markets under the "14" name. Because HP also built an OLED version of this laptop on a different connector, the exact suffix on your base sticker matters. Read that model number or bring the laptop in, and Mascom International confirms the match before fitting.
Is this the OLED screen or the IPS screen, and how do I tell them apart?
This is the IPS 1920x1280 WUXGA+ version, not the 3000x2000 OLED. The two are not interchangeable: the IPS panel uses a 30-pin EDP connector, while the OLED uses a 40-pin connector, so pin count alone tells them apart. Check your original screen model or the resolution set in Windows display settings. If your Spectre shipped with the sharper 3000x2000 OLED, tell Mascom International before ordering and we source that 40-pin variant instead, so the connector and resolution both match your machine exactly.
Does this bring back both the picture and the touch input?
Yes, both return after one swap. This is a full touch assembly, meaning the LCD panel and the capacitive touch digitizer arrive bonded together as a single sheet of glass and screen. That matters on a Spectre, because it is a convertible you flip into tablet and tent modes, so a screen that lights up but ignores your finger only solves half the fault. With this bonded assembly, the image, the multi-touch response, and the pen tracking all come back together, and your technician does not chase a separate digitizer part.
Is my Spectre worth repairing at KSh 18,500?
For a working Spectre body, yes. The KSh 18,500 covers the WUXGA+ IPS panel and the touch digitizer together, and it revives a 2-in-1 that costs far more to replace outright. A clean used Spectre x360 14 sells well above that figure in Kenya, so a single screen swap is the cheaper route back to a fully usable laptop. Mascom International tests the assembly before fitting and backs it with a 6-month warranty, so you are not gambling on an untested panel shipped from abroad with no local support desk.
Can I fit this screen myself, or do I need a technician?
Fitting a bonded touch assembly is a careful job, so it suits someone with repair experience or the right tools. The work involves warming and lifting the old glass, disconnecting the delicate 30-pin ribbon, and transferring the bezel, board, and hinges from your original. Rushing risks tearing the flex cable or cracking the fresh panel. If you work along Luthuli Avenue or are used to opening laptops, a competent technician finishes it in about an hour. If not, Mascom International fits the HP Spectre 14-es screen at our Kimathi Street counter while you wait.
Will tablet mode and the tall 3:2 screen work exactly like before?
Yes. This panel keeps the same 13.5-inch, 3:2 aspect ratio as your original, so the taller screen shape that suits documents and web pages returns unchanged. The IPS layer holds colour and contrast when you fold the Spectre flat, into tent mode, or fully around into tablet mode, which is where wide viewing angles count most. Multi-touch gestures such as pinch-to-zoom and two-finger scroll behave as they did before the damage, letting you browse and annotate without reaching for the trackpad.
I am outside Nairobi can I still get this Spectre screen?
Yes. Mascom International ships the HP Spectre 14-es screen replacement to all 47 counties with pay-on-arrival delivery, so you inspect the part and pay only when it reaches you. Nairobi and its environs get same-day delivery, Mombasa, Kisumu, Nakuru, and Eldoret receive it within one business day, and the furthest towns within two to three days. Because the panel is fragile, it travels in protective moulding. Send your exact Spectre sub-model over WhatsApp on +254 708 852 521, and we confirm the correct 30-pin or 40-pin screen before dispatch.
How do I know the screen works before I pay?
Every HP Spectre 14-es screen is powered on and tested at Mascom International before it leaves the counter or ships. We check the display for dead pixels, backlight faults, and touch response across the full glass, so you receive a verified working unit rather than an unknown-quality import. This is where a registered Nairobi CBD store with a real address beats an anonymous online seller. If a fitted screen develops a hardware fault inside the warranty window, our Kimathi Street service desk handles the claim in person, without shipping your part overseas.
Technical Specifications
Display Panel and Resolution
- 13.5-inch diagonal panel sized for the Spectre x360 14 chassis, which HP lists under its "14" model name.
- Native 1920x1280 WUXGA+ resolution holds about 2.46 million pixels for clear text during long reading and drafting sessions.
- 3:2 aspect ratio keeps the taller screen shape that suits documents, code, and web pages over a wide 16:9.
- IPS panel technology keeps colour accurate at wide angles, which matters when the Spectre folds into tent or tablet mode.
- LED backlight spreads even brightness across the glass for steady indoor reading and shaded outdoor use.
- Matching your original resolution avoids the scaling and boot-display faults that come from mixing IPS and OLED panels.
Touch Digitizer and Fingertip Input
- Capacitive touch digitizer bonded to the glass returns tap, swipe, and pinch gestures across the whole screen.
- Multi-touch tracking suits tablet-mode use, letting you scroll and mark up files without the trackpad.
- Bonded single-sheet build keeps the image layer and the touch layer aligned, so touch points land where you press.
- Pen input returns on units that shipped with active-stylus support, letting designers and note-takers write on screen.
- Clean glass surface clears the ghost-touch and dead-zone faults common on a shattered original panel.
- One assembly covers both display and touch, so no separate digitizer needs sourcing for the repair.
Model Compatibility and Connector Type
- Fits the non-OLED 1920x1280 Spectre x360 14 family: 14-ef0xxx, 14-ef1xxx, 14-ef2xxx, 14t-ef, and matching 14-ea units.
- Uses a 30-pin EDP video connector, HP's fitting for the IPS non-OLED panel on this generation.
- The 3000x2000 OLED version uses a 40-pin connector instead, so pin count decides which screen your unit needs.
- Cross-references HP part numbers N10728-001, N10731-001, and N10734-001, plus panel code N135NCG-GT1.
- Sub-model checking before purchase prevents the wrong-resolution or wrong-connector error common with blind online orders.
Panel Build and Transit Protection
- Bonded glass-and-panel unit holds together as one rigid sheet, which reduces flex while a technician seats it.
- Fresh backlight and clear glass restore the brightness and sharpness lost to cracks and dark patches.
- Grade-A panel selection lowers the chance of dead pixels or backlight bleed against cheaper stock.
- Protective moulding wraps the screen for courier transit to any Kenyan county without added pressure lines.
- Standard 13.5-inch Spectre dimensions seat correctly once your original bezel and hinges are transferred over.
- Clean surface returns accurate touch tracking, removing the phantom taps a broken original often triggers.
Fitting Requirements and Transferred Parts
- Installation involves lifting the bonded glass, disconnecting the 30-pin ribbon, and transferring the bezel, board, and hinges.
- Original LCD cable, hinges, back cover, webcam, and controller board are reused from your machine, not supplied here.
- Whether a bezel arrives pre-attached varies by unit, so Mascom International confirms what your specific order includes.
- The 30-pin flex cable is delicate, so steady handling during the swap protects the new panel from damage.
- In-store fitting on Kimathi Street tests the display and touch before you pay for the work.
- Powered-on testing before dispatch confirms display and touch function on every screen that leaves the counter.
What's in the Package
The HP Spectre 14-es screen replacement ships as a bonded touch unit: the 13.5-inch WUXGA+ IPS LCD panel with the capacitive touch digitizer as one sheet. It does not include the LCD ribbon cable, hinges, back cover, webcam, or controller board these transfer from your original screen during fitting, so keep your existing parts. Whether a bezel is pre-attached depends on the unit, confirmed at purchase. Fitting guidance is available at the Mascom International counter, and in-store installation can be added on request.
Warranty
The HP Spectre 14-es screen replacement carries a 6-month Mascom International warranty covering manufacturing defects and hardware functionality under normal use. Our Nairobi CBD service desk handles any warranty claim directly, in person, without shipping your part overseas. Bring the unit to our Kimathi Street counter and our team resolves the issue face to face.
Where to Buy the HP Spectre 14-es screen replacement in Kenya
The HP Spectre 14-es screen replacement is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit our store Monday through Saturday, 9:00 AM to 7:00 PM, to have your Spectre tested and the screen fitted in person before you pay. Bring the laptop or its model number so we confirm the exact IPS or OLED panel and connector your unit needs.
Order through any of the following:
- Phone: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
- WhatsApp: +254 708 852 521
Mascom International ships the HP Spectre 14-es screen across all 47 Kenyan counties with pay-on-arrival delivery you inspect the part and pay only when it reaches you. Nairobi and its environs receive same-day delivery, while Mombasa, Kisumu, Nakuru, and Eldoret get it within one business day. The furthest counties receive delivery within two to three business days, with the fragile panel packed in protective moulding for the journey.
Buyers across Kenya rely on Mascom International for accurate part matching, honest specifications, and warranty backing handled directly from our Nairobi CBD store. Send your Spectre sub-model over WhatsApp today and we confirm the right screen before you commit.
