oraimo EasyCut Super Powerful Adjustable Hair Clipper is now in stock at Mascom International for KSh 2,100, built around a 7,000 RPM motor, a 3.7V 2,000mAh battery rated for 150 minutes of cutting, and a stainless steel blade that closes to zero gap. The oraimo EasyCut carries model number OCL-230 and measures 195 x 54 x 42.5mm in a PC and ABS shell. Mascom International keeps the oraimo EasyCut on the shelf at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, open Monday to Saturday, 9:00 AM to 7:00 PM. Four guide combs, lubricant oil, a cleaning brush and a Type-C cable ship inside the retail box.
Barbers running shops in Eastlands, Kawangware, Kisumu and Nakuru buy the oraimo EasyCut as a second machine for fades and edge-ups between mains-powered clippers. Fathers who cut their sons' hair every second Saturday buy it to stop paying KSh 200 per trim. University students at Kenyatta University, JKUAT and the University of Nairobi keep one in the hostel drawer. Kenya's power cuts stop a corded clipper mid-cut; the oraimo EasyCut runs 150 minutes off one charge, so a blackout does not leave anyone walking around half-shaved. That single problem unreliable mains supply during a haircut is what pushes most buyers toward a cordless unit.
Unlike other electronics retailers in Kenya who stock grey-market clippers with no service path, Mascom International sells oraimo units that carry genuine serial numbers you can check on oraimo's own authentication page. Buyers throughout Kenya tell us the 7,000 RPM motor pulls through coarse, tightly coiled hair without snagging, which is the exact failure point of cheap KSh 800 clippers sold on the street. The oraimo EasyCut holds a 4.8 out of 5 rating across 257 verified oraimo store reviews. Walk into our Kimathi Street shop to hold the unit and feel the taper lever, or order for countrywide pay-on-arrival delivery.
Common Questions About the oraimo EasyCut Adjustable Hair Clipper
Is the oraimo EasyCut strong enough for coarse Kenyan hair?
Yes. The oraimo EasyCut runs a 7,000 RPM motor, which is the figure that decides whether a clipper cuts hair or drags it. Tightly coiled, dense hair loads the blade far harder than straight hair does, and low-speed motors stall, then pull. Verified reviewers repeatedly report smooth passes with no snagging on thick hair. The stainless steel blade stays sharp against that load and resists the rust that humidity along the coast and in Kisumu brings to carbon-steel blades.
How long does the oraimo EasyCut battery actually last per charge?
The oraimo EasyCut runs 150 minutes 2.5 hours from a full charge of its 3.7V 2,000mAh 18650 cell, per oraimo's own rating. A standard men's cut takes 15 to 20 minutes, so one charge covers roughly seven to nine heads. A busy barber can work an entire morning shift without touching a socket. Charging takes 3.5 hours through the bundled Type-C cable at 5V 1A, so plug it in overnight rather than between clients.
Can a barber shop in Nairobi run this clipper daily?
It works as a reliable daily driver for small shops and as a backup in busier ones. Seven to nine cuts per charge covers a slow weekday in most estate barbershops. For a Saturday queue of 20 clients, keep it charging between customers or run a second unit. The 195mm body and 42.5mm depth sit comfortably in one hand through long sessions, and the taper lever adjusts mid-cut without stopping the motor or changing your grip.
What does zero-gap mean and why does it matter for line-ups?
Zero gap means the cutting blade sits flush against the still blade, with no space between the teeth. That is what produces a hard, clean line at the hairline, around the ears and along a beard edge. On the oraimo EasyCut you reach it by turning the taper lever — no screwdriver, no blade removal. Barbers charging extra for line-ups in Nairobi CBD and Westlands need this. A clipper that cannot close to zero leaves a soft, fuzzy edge instead.
What cutting lengths can the oraimo EasyCut produce?
The oraimo EasyCut covers 0.5mm to 13mm. The four-level taper lever handles the short end, moving from 0.5mm to 2mm on the bare blade for fades, edges and skin-close work. Four guide combs 3mm, 6mm, 9mm and 13mm snap on for bulk removal and uniform lengths. That range covers a low fade, a standard number-one to number-four cut, and a longer 13mm top left for styling. Most home users only ever need two of the combs.
Is the oraimo EasyCut worth KSh 2,100 in Kenya's market?
At KSh 2,100 the oraimo EasyCut pays for itself in roughly ten haircuts at typical estate barbershop rates of KSh 200 to KSh 300. A family cutting two boys' hair twice a month clears that in under three months, then keeps cutting for free. Street-market clippers at KSh 700 to KSh 900 use weaker motors that snag and fail within months, with no serial number and no service centre. oraimo units are authenticated online and serviced through Carlcare branches across Kenya.
How does the oraimo EasyCut compare to the oraimo EasyCut 2?
The oraimo EasyCut OCL-230 is the value model; the EasyCut 2 (OCL-233N) sits above it with a 10W motor, a digital display and faster 2-hour charging at 5V 2A. Both reach 150 minutes of runtime and both close to zero gap. If you cut hair at home or run a small shop, the OCL-230 does the same core job for noticeably less money. Mascom International stocks both compare them side by side at our Kimathi Street counter.
What comes inside the oraimo EasyCut retail box?
Six items: the oraimo EasyCut Super Powerful Adjustable Hair Clipper itself, four guide combs at 3mm, 6mm, 9mm and 13mm, a cleaning brush, a Type-C charging cable, a bottle of lubricant oil and a welcome guide. oraimo includes the oil because a dry blade heats up, cuts poorly and wears fast. No wall adapter ships in the box any 5V USB charger, laptop port or power bank works. Mascom International stocks oraimo adapters separately if you need one.
Technical Specifications
Motor Output and Cutting Speed
- 7,000 RPM motor speed sets the blade oscillation rate that stops hair snagging on dense, coiled textures
- Cordless-only operation means no trailing cable catching on the chair, mirror stand or client's shoulders
- Consistent speed under load holds cutting quality steady from the first pass to the last
- Motor noise stays low enough for indoor home use, per repeated verified reviewer feedback on the OCL-230
- 195 x 54 x 42.5mm body sizes the unit for single-hand control through a full head without wrist fatigue
- PC and ABS housing keeps the weight down so long fade sessions stay comfortable
Blade Design and Length Control
- Stainless steel blade resists rust in coastal Mombasa humidity and Kisumu's lake-side air, unlike carbon steel
- Zero-gap adjustment closes blade teeth flush for hard line-ups at the hairline, ears and beard edge
- Four-level taper lever spans 0.5mm to 2mm and moves mid-cut without stopping the motor
- Lever adjustment needs no screwdriver, so blade alignment stays correct after every change
- Detachable blade lifts off for brushing out clippings and applying the bundled lubricant oil
- Blade geometry pairs with guide combs for uniform lengths across the crown and sides
Battery Capacity and Charging Time
- 3.7V 2,000mAh 18650 lithium cell drives 150 minutes of continuous cutting on one full charge
- 150 minutes covers roughly seven to nine standard 15-to-20-minute men's cuts per charge cycle
- 3.5-hour charge time at 5V 1A suits overnight charging rather than quick top-ups between clients
- Type-C port accepts any phone charger, laptop USB port or power bank already in the house
- Cordless runtime keeps cuts going through Kenya Power outages that stop mains-only clippers mid-fade
- No wall adapter included; oraimo and third-party 5V adapters are stocked separately at Mascom International
Guide Combs and Styling Range
- Four combs at 3mm, 6mm, 9mm and 13mm cover number-one through number-four cutting lengths
- 3mm comb handles low fades and short back-and-sides on school-age boys
- 6mm and 9mm combs suit the standard office cut most Nairobi professionals ask for
- 13mm comb leaves length on top for styling, twists or a longer taper
- Combs clip on and off by hand, so switching lengths mid-cut takes seconds
- Combined with the 0.5mm to 2mm lever, total coverage runs 0.5mm to 13mm
Build Quality and Daily Durability
- PC and ABS shell absorbs the knocks a clipper takes falling off a barber's counter or bathroom shelf
- Cordless design removes the cable strain point where most budget clippers fail first
- Compact 195mm length fits a barber's toolbag, a hostel drawer or a travel case
- Sealed body is not waterproof — clean the blade dry with the brush, never under a running tap
- Genuine oraimo serial number can be checked on oraimo's authentication page before you leave the shop
- Carlcare service centres in Nairobi, Mombasa, Kisumu, Nakuru and Eldoret handle oraimo after-sales work
Maintenance and Blade Care
- Brush clippings from the blade after every cut; trapped hair is the main cause of dull, pulling blades
- Apply two drops of the bundled lubricant oil to the blade teeth every three to four cuts
- Wipe the blade dry after oiling to stop dust and hair sticking to the surface
- Store with the blade guard on to protect the teeth from chipping against other tools
- Recharge before the cell fully empties; deep discharges shorten lithium battery life over time
- Avoid alcohol or petrol-based cleaners on the PC and ABS shell, which can craze the plastic
Package Contents
- oraimo EasyCut Super Powerful Adjustable Hair Clipper (OCL-230) x 1
- Guide combs x 4 (3mm, 6mm, 9mm, 13mm)
- Cleaning brush x 1
- Type-C charging cable x 1
- Lubricant oil x 1
- Welcome guide x 1
Note: No wall charging adapter ships in the oraimo EasyCut box. Any 5V USB output phone charger, laptop port or power bank charges the unit. Mascom International stocks oraimo wall adapters separately.
Warranty
The oraimo EasyCut Super Powerful Adjustable Hair Clipper carries a 6-month Mascom International warranty on manufacturing defects. Every unit we sell holds a genuine oraimo serial number you can verify on oraimo's official authentication page before payment. Our Nairobi CBD service desk handles claims directly, and Carlcare centres across Kenya cover oraimo after-sales support.
Where to Buy the oraimo EasyCut Hair Clipper in Kenya
Mascom International stocks the oraimo EasyCut at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday between 9:00 AM and 7:00 PM to hold the unit, turn the taper lever, and check the blade before you commit.
Three ways to order:
- Call +254 708 852 521
- Email info@mascomintl.com
- Order through www.mascomintl.com
Pay-on-arrival delivery reaches all 47 counties. Nairobi and its environs receive the oraimo EasyCut the same day. Nakuru, Eldoret, Kisumu, Kakamega, Kisii and other major towns receive it within 1 business day. Mandera, Wajir, Marsabit, Lamu, Tana River and Turkana take 2 to 3 business days. You inspect the clipper and pay only when it reaches you.
Buyers across Kenya rely on Mascom International for honest specifications, current Kenyan pricing, and after-sales backing on every grooming tool we stock. Our team knows the difference between a genuine oraimo unit and a lookalike, and we will show you how to check the serial number yourself.
