Payment Methods
1. Lipa Na M-PESA
Paybill No.: 5450522
Account No.: M
2. Cash on delivery
3. Cash on collection
D-Link DGS-F1016 | 16-Port Gigabit Unmanaged Switch | 1000Mbps Per Port | 32Gbps Switching Capacity | Rackmount Fanless Design
Quick file transfers, networked storage and busy video recorders for offices outgrowing older equipment.
Condition: New
Note: price and availability are subject to change without prior notice
D-Link DGS-F1016 is now available at Mascom International for KSh 9,000, brand new and sealed in D-Link packaging. The D-Link DGS-F1016 provides sixteen 10/100/1000Mbps ports backed by 32Gbps of switching capacity, so every port can run at full Gigabit speed together. It supports 9,216-byte jumbo frames, IEEE 802.1p traffic priority, and 802.3az energy saving. Rack brackets come in the box, and the fanless design runs in total silence whether it sits on a shelf or inside a locked cabinet. Find it at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, or order online for delivery.
Built for accountants, architects, media teams, and IT officers across Kenya, the D-Link DGS-F1016 removes the bottleneck that older 100Mbps switches create. Moving a 10GB project folder takes over thirteen minutes on Fast Ethernet but under two minutes on Gigabit. That difference adds up in firms sharing audit files during KRA deadlines or design studios in Kilimani passing large drawings between desks. The D-Link DGS-F1016 also lets shared printers, network storage drives, and CCTV recorders work at full speed. Offices on fibre plans above 100Mbps finally get the speed they pay for at every wired desk, not just at the router.
No other sixteen-port switch in our Nairobi CBD store combines Gigabit speed, rack mounting, and a price this close to Fast Ethernet models. The D-Link DGS-F1016 works out to about KSh 563 per port. Customers across Nairobi report that it upgrades a whole office in an afternoon, simply by swapping the old switch and reconnecting the same cables. Our team at Mascom International will confirm your existing cabling supports Gigabit before you buy. Test the D-Link DGS-F1016 at our Kimathi Street store, or order it for pay-on-arrival delivery.
Common Questions About the D-Link DGS-F1016
Is the D-Link DGS-F1016 worth KSh 9,000 over a cheaper Fast Ethernet switch?
Yes, if your office moves large files, uses network storage, or has fibre faster than 100Mbps. The D-Link DGS-F1016 gives each port ten times the speed of a Fast Ethernet switch for about KSh 4,700 more than the D-Link DES-1016A. That extra cost disappears quickly once staff stop waiting for transfers and backups. For an office that only browses and prints, the cheaper switch is enough. For anything heavier, the D-Link DGS-F1016 is the better long-term buy, because it will not need replacing when your internet plan or file sizes grow.
How much faster is the D-Link DGS-F1016 for file transfers?
The D-Link DGS-F1016 runs each port at up to 1,000Mbps, ten times faster than a 100Mbps switch. In practice, a 10GB folder that takes more than thirteen minutes on Fast Ethernet moves in under two minutes on Gigabit. Real speeds depend on the computers and drives at each end. Most laptops and desktops sold in the last several years already have Gigabit network ports. Plug them into the D-Link DGS-F1016 and the upgrade happens automatically, with no settings to change. Check the speed light on each port to confirm the Gigabit link.
D-Link DGS-F1016 vs D-Link DGS-F1024, which should you choose?
Choose the D-Link DGS-F1016 if you need up to fifteen wired devices, and the D-Link DGS-F1024 if you need more. Both are Gigabit, unmanaged, fanless, and rack-mountable. The DGS-F1024 costs KSh 11,000, so eight extra ports cost KSh 2,000 more. Buy the larger model if you expect to add staff, printers, or cameras within a year or two. Replacing a full switch later costs more than buying spare ports now, and it means another afternoon of recabling the whole office.
Will the D-Link DGS-F1016 give me full speed on Safaricom Home Fibre or Zuku?
Yes, the D-Link DGS-F1016 passes your full fibre speed to every wired device, even on plans above 100Mbps. A Fast Ethernet switch caps each computer at 100Mbps, so faster plans are partly wasted behind it. Connect one port to your Safaricom, Zuku, Faiba, or Airtel router, then cable your computers to the rest. Your router still controls the internet connection. The D-Link DGS-F1016 simply makes sure the switch is never the slowest link. Video calls, cloud backups, and large downloads all benefit on busy days.
Can the D-Link DGS-F1016 be mounted in a server cabinet?
Yes, the D-Link DGS-F1016 ships with rack mount brackets for a standard 19-inch cabinet. At 44mm tall, it takes a single rack unit, leaving space for a patch panel, router, and recorder. It can also sit on a shelf or desk if you do not have a cabinet yet. Rack mounting protects the ports from accidental knocks and lets you lock the equipment away. Mascom International supplies cabinets, patch panels, and patch cords to finish the installation, so the whole network point comes from one supplier.
Does the D-Link DGS-F1016 work with NAS drives and CCTV recorders?
Yes, the D-Link DGS-F1016 suits network storage and IP camera recorders because every port runs at Gigabit speed. It supports jumbo frames of up to 9,216 bytes, which help NAS drives move large files more efficiently. A recorder handling many high-resolution cameras can use the full bandwidth of its port. Note that the switch does not supply Power over Ethernet, so cameras need their own power. The D-Link DGS-F1010P-E handles that job where you want single-cable camera wiring, and it links neatly into the D-Link DGS-F1016 through its Gigabit uplink ports.
How does the D-Link DGS-F1016 cope with power cuts and warm server rooms?
The D-Link DGS-F1016 runs on a 12V adapter and draws no more than 9.5W, so a small UPS keeps it running through outages. When KPLC power returns, it restarts automatically and every device reconnects without any action. Its fanless design has no moving parts to fail and no fan pulling dust inside. It is rated for 0 to 40°C, so keep the cabinet ventilated in warm rooms. A surge protector or UPS also guards it against the spikes that often follow a blackout.
Who should buy the D-Link DGS-F1016, and who should skip it?
Buy the D-Link DGS-F1016 if your office shares large files, runs network storage, uses a busy CCTV recorder, or pays for fibre above 100Mbps. It suits accounting firms, design studios, media houses, clinics with digital imaging, and growing SMEs. Skip it if your team only browses, emails, and prints on a basic plan; the D-Link DES-1016A does that for less. Skip it too if you need more than fifteen devices, because the D-Link DGS-F1024 offers more room. Mascom International stocks all three, so our team can match the right switch to your office.
Technical Specifications
Gigabit Port Configuration
- Sixteen 10/100/1000Mbps RJ45 ports give every computer, printer, and storage drive full Gigabit speed.
- Auto-negotiation matches each port to the connected device, so older 100Mbps equipment still works normally.
- Auto MDI/MDIX on all ports accepts straight or crossover cables without any manual adjustment.
- Full-duplex operation lets each port send and receive at the same time for faster two-way transfers.
- Any port can connect to your router, giving flexible cable layouts inside a cabinet or office.
- Existing Cat5e and Cat6 cabling supports Gigabit speeds, so most upgrades need no rewiring.
- Cable runs of up to 100 metres per port reach desks across a typical office floor from one cabinet.
Switching Capacity and Throughput
- Switching capacity of 32Gbps lets all sixteen ports run at full speed in both directions together.
- Forwarding rate of up to 1,488,000 packets per second per Gigabit port prevents congestion during busy periods.
- A 512KB packet buffer absorbs traffic bursts when many users open shared files at once.
- An 8K MAC address table tracks every device, sending traffic directly to the right port.
- Jumbo frames up to 9,216 bytes reduce overhead when NAS drives and servers move large files.
- Non-blocking design means one busy port never slows the other fifteen connections.
- Gigabit links let nightly backups to a NAS finish in a fraction of the time Fast Ethernet needs.
Traffic Management Standards
- IEEE 802.3, 802.3u, and 802.3ab support covers 10Mbps, 100Mbps, and Gigabit Ethernet devices.
- IEEE 802.3x flow control prevents data loss when a fast computer sends faster than a receiver accepts.
- IEEE 802.1p QoS lets voice and video traffic move ahead of large downloads when the network is busy.
- Unmanaged operation needs no passwords, login pages, or firmware updates to keep running.
- Plug-and-play setup lets anyone replace an old switch without calling a network technician.
- Works alongside any router, access point, or managed switch that follows standard Ethernet rules.
- Priority queues help Zoom, Teams, and IP phone calls stay clear while others download large files.
Power and Energy Efficiency
- A 12V 1A external adapter powers the switch, and its low draw suits small UPS units.
- Standby draw of 3.7W and peak draw of 9.5W keep running costs low for an always-on network.
- At full load around the clock, consumption stays under 84kWh a year.
- IEEE 802.3az Energy-Efficient Ethernet reduces power on idle links during nights and weekends.
- Automatic restart after power cuts brings the whole network back online without any manual steps.
- Low heat output from efficient components supports a long service life inside closed cabinets.
Chassis, Mounting and Cooling
- Dimensions of 280 x 126 x 44mm fit a single rack unit in a standard 19-inch cabinet.
- Rack mount brackets included in the box save a separate purchase when building a network cabinet.
- Weight of 0.87kg makes it easy to fix into a rack or place on a sturdy shelf.
- Fanless design runs silently, suiting open-plan offices, boardrooms, and reception areas.
- No fan means no dust drawn over circuit boards, which helps in offices near busy roads.
- Operating range of 0 to 40°C suits indoor cabinets with normal ventilation.
Status Indicators and Everyday Use
- Per-port lights show link, activity, and speed, so you can see which devices connect at Gigabit.
- A power indicator confirms at a glance that the switch is receiving electricity.
- Speed lights quickly reveal a faulty cable that has dropped a computer to 100Mbps.
- Front-facing ports keep cable management simple and make adding a new desk quick.
- Clear port numbering helps technicians label and trace cables when troubleshooting later.
- No software or app is required, so the switch keeps working unchanged for years after installation.
Package Contents
The D-Link DGS-F1016 arrives sealed in D-Link retail packaging, ready for desktop or cabinet installation:
- D-Link DGS-F1016 16-port Gigabit switch
- 12V external power adapter
- Rack mount brackets with screws
- Quick installation guide
Network cables are sold separately, and Mascom International stocks Cat6 patch cords, cable rolls, patch panels, and wall cabinets to complete your setup in one visit.
Warranty
Mascom International backs the D-Link DGS-F1016 with a 12-month warranty covering manufacturing defects under normal use. Our Nairobi CBD service desk tests returned units and arranges repair or replacement. Please keep your receipt to confirm the purchase date.
Where to Buy the D-Link DGS-F1016 in Kenya
D-Link DGS-F1016 is available now at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit Monday through Saturday, 9:00 AM to 7:00 PM, to inspect the D-Link DGS-F1016 and its rack brackets before purchase. Available colour: Black.
Order through any of the following:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the D-Link DGS-F1016 across all 47 Kenyan counties with pay-on-arrival delivery, so you pay only when the switch reaches you. Nairobi and its environs, including Westlands and Upper Hill offices, receive same-day delivery. Mombasa, Nakuru, Machakos, Thika, and all other major towns receive next-business-day delivery. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Every unit is covered by the 12-month warranty detailed above, with claims handled at our Nairobi CBD store.
Offices and IT teams across Kenya rely on Mascom International for genuine D-Link switches, honest upgrade advice, and after-sales help from a shop you can walk into.
Disclaimer: We can not guarantee that the information on this product is 100% correct
SOCIAL MEDIA