The Rode DS2 is in stock at Mascom International, priced at KSh 22,000, brand new and sealed, with a freestanding weighted base, a 900g load capacity and a reach up to 380mm high. It holds microphones, cameras, smartphones and lights through a 3/8-inch thread with a 1/4-inch adapter included. Two pivot points let you swing your gear into place in seconds, and cable slots keep leads tidy. You can handle the Rode DS2 and test it with your own microphone at our store in Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD.
Designed for podcasters, streamers, content creators, journalists and teachers recording online classes, the Rode DS2 handles the daily job of keeping a microphone steady on a crowded desk. Clamp-on boom arms need a thick, square table edge, and many Nairobi desks have neither. Glass tops crack, and rented offices in Upper Hill and Kilimani rarely allow screws. The Rode DS2 simply sits on the surface. Its heavy base keeps it upright, so you can lift it off a dining table after recording and pack it away when the room returns to family use.
Unlike other electronics retailers in Kenya that sell unbranded arms which droop within weeks, Mascom International stocks the Rode DS2 from the same maker as the microphones it is built to carry. Buyers throughout Kenya report that a stable stand does more for their sound than another upgrade, because the microphone stays at the right distance for the whole session. At Mascom International, we're seeing creators pair the Rode DS2 with the Rode PodMic USB for a clean, compact desk. Visit the store, or order on WhatsApp for pay-on-arrival delivery anywhere in Kenya.
Common Questions About the Rode DS2
How much is the Rode DS2 desktop studio arm in Kenya?
The Rode DS2 costs KSh 22,000 brand new and sealed at Mascom International in Nairobi CBD. The price includes the arm, the weighted base, a 3/8-inch to 1/4-inch thread adapter, two M4 screws, an M3 hex key and a 6-month warranty. Delivery is pay-on-arrival across all 47 counties, so you check the box before paying by M-Pesa or cash. Paired with a Rode PodMic USB at KSh 31,500, a full desk recording setup comes to KSh 53,500.
Should I get the Rode DS2 or a clamp-on boom arm?
The Rode DS2 stands on its own weighted base, while a clamp-on boom arm such as the Rode PSA1+ bolts onto the edge of a desk. A boom arm reaches further and swings clear of your screen when not in use. The DS2 needs no table edge, sets up in seconds and moves between rooms. Choose a boom arm for a fixed studio desk with a solid edge. Choose the Rode DS2 for glass tables, rounded desks, rented offices or shared spaces.
Can the Rode DS2 hold the Rode PodMic USB?
Yes, the Rode PodMic USB weighs 900g, which matches the Rode DS2's rated load limit of 900g exactly. The microphone's own swing mount threads onto the arm, and you angle it toward your mouth using the two pivot points. Because the pairing sits right at the limit, tighten both joints firmly before you start talking. Lighter gear, such as most USB microphones, smartphones and small LED lights, sits on the arm with room to spare.
Will the Rode DS2 work on the desks common in Kenyan homes and offices?
The Rode DS2 works on any flat, level surface, including glass tables, laminated office desks and dining tables found across Nairobi and Mombasa homes. It needs no clamp, so a desk with a thick lip, rounded edge or drawer underneath poses no problem. Its heavy base spreads the load, which suits rented spaces where tenants cannot drill. In dusty areas, wipe the base and joints with a dry cloth weekly so grit does not wear the pivots.
How tall does the Rode DS2 get?
The Rode DS2 extends from 190mm folded to 380mm fully raised. That range brings a microphone up from desk level to roughly mouth height for a seated speaker. The footprint measures 170mm long by 120mm wide, smaller than a sheet of A4 paper. For someone standing to present, or for a tall person sitting back from the desk, a floor stand or boom arm gives more height than the DS2 offers.
Can I mount a smartphone or camera on the Rode DS2 for TikTok and YouTube?
Yes, the Rode DS2 carries smartphones, cameras and lights through its 3/8-inch thread, or the included 1/4-inch adapter that most cameras use. A phone needs a standard tripod clamp, sold separately, to attach. Creators across Kenya use it to shoot overhead cooking clips, unboxing videos and product shots for Instagram and TikTok shops. Keep any camera, lens and clamp combined under the 900g limit so the arm holds its position.
Does the Rode DS2 help keep cables tidy?
Yes, the Rode DS2 has integrated cable guide slots along the arm that hold your microphone or camera cable in place. That keeps a USB-C or XLR lead from swinging into your keyboard or catching on a mug during a live session. A tidy cable also stops the cable's weight from pulling the microphone out of position. Content creators in small Kilimani and Westlands studios find this makes a cramped desk look clean on camera.
Who should buy the Rode DS2, and who should skip it?
The Rode DS2 suits podcasters, streamers, online tutors and creators who work at a desk they cannot clamp to, or who pack up after each session. It also suits anyone filming top-down product videos. Skip it if your microphone weighs more than 900g, or if you want the arm to swing completely out of your sightline. In that case, a clamp-on boom arm is the better fit. A simple tripod stand also costs less for occasional use.
Technical Specifications
Core Function and Positioning
- Freestanding weighted base — the stand sits on the desk without clamps, screws or mounting points, so setup takes seconds.
- Two pivot points — move your microphone or camera up, down and toward you quickly, then lock it in place.
- Extends from 190mm folded to 380mm raised — brings a microphone from desk level to roughly mouth height when seated.
- Integrated cable guide slots — keep USB-C or XLR leads along the arm and away from your keyboard and screen.
- Built to keep gear at a fixed distance — steady mic placement means your voice level stays even throughout a recording.
Compatibility
- 3/8-inch-16 UNC thread mount — the standard thread used by most studio microphones and their mounts.
- 1/4-inch-20 UNC adapter included — fits the thread found under most cameras, phone clamps and small LED lights.
- Works with microphones, cameras, smartphones and lights — one stand covers audio, video and lighting jobs on the same desk.
- Takes any accessory under 900g — the Rode PodMic USB, at exactly 900g, sits right at this limit.
- Works with any brand of gear carrying a standard thread — not limited to Rode microphones or accessories.
Build and Dimensions
- 1,471g total weight — most of it in the base, which keeps the arm stable when a microphone hangs forward.
- 170mm long by 120mm wide — a footprint smaller than a sheet of A4 paper, leaving room for a laptop and notes.
- 380mm top height — enough for a seated speaker; standing presenters need a floor stand or boom arm instead.
- Arm and base come as separate pieces — they join with the supplied screws, and pack flat for travel between locations.
- Flat base with no clamp — safe on glass, laminate and wooden tops that a desk clamp could scratch or crack.
Inclusions and Setup
- DS2 arm and DS2 base — the two main parts, joined in a few minutes with the screws and key supplied.
- Two M4 screws — fix the arm securely to the base so it stays rigid during use.
- M3 hex key — the tool for assembly, so you need nothing from your own toolbox.
- 3/8-inch to 1/4-inch thread adapter — switches the mount from microphones to cameras, phone clamps or lights.
- Quick Start Guide — clear assembly steps from Rode, and our staff can walk you through setup at the counter.
Package Contents
The Rode DS2 arrives brand new and sealed in Rode's retail box. Inside are the DS2 arm, the DS2 base, two M4 screws, a 3/8-inch to 1/4-inch thread adapter, an M3 hex key and a Quick Start Guide. A microphone, phone clamp and cables are not included. Mascom International stocks the Rode PodMic USB and the Rode PodMic, so you can leave with a stand and microphone matched for weight and thread size.
Warranty
Mascom International covers the Rode DS2 with a 6-month warranty against manufacturing defects under normal use, including the arm, base, pivot joints and thread mount. Bring the stand and your receipt to our service desk at Old Mutual Building, Kimathi Street, Nairobi CBD, and our team will handle the claim.
Buying the Rode DS2 from Mascom International
The Rode DS2 is available at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Our doors open Monday through Saturday, 9:00 AM to 7:00 PM. Bring your microphone or camera along and mount it on the display unit to check the fit and height first. It comes in black.
Contact us to reserve one or ask a question:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Delivery is pay-on-arrival to all 47 counties. Nairobi and its environs receive orders the same day, while buyers in Nakuru, Kisumu, Thika and Nyeri get theirs within 1 business day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days. Your stand is covered by the 6-month warranty above. We give you accurate prices, specifications you can rely on, and real support after the sale.
 Black 1 Mascom International.webp)
