Green Lion Flex Cup Mag is now in stock at Mascom International for KSh 3,200, available from Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. The Green Lion Flex Cup Mag drops into any vehicle cup holder measuring 3 inches to 3.3 inches across, then holds your phone on a magnet array built from 17 N52-grade neodymium magnets. A bendable gooseneck arm sets the screen at whatever height suits your dashboard layout. A 360-degree ball head at the top swings the display between portrait and landscape in one movement. The body combines nylon, polycarbonate, and TPU, finished in black.
Drivers running Bolt, Uber, and Little shifts around Nairobi keep a phone visible for eight to twelve hours a day. Windscreen suction pads lose grip in afternoon heat, and vent clips sag under a 220-gram handset once the vent plastic warms. The Green Lion Flex Cup Mag moves that load off the glass entirely and puts it on the centre console, where the cup holder carries the weight. Sales representatives working the Nairobi-Mombasa corridor, field engineers driving between Nakuru and Eldoret sites, and medical representatives visiting Aga Khan and MP Shah clinics get the same result. Navigation sits low in your field of view instead of across the road ahead.
Unlike traditional electronics retailers in Kenya, Mascom International backs the Green Lion Flex Cup Mag with a 6-month warranty and a service desk you can walk into. Users consistently report that a magnetic car mount is only as good as the magnet count behind it, and 17 magnets hold a large handset through Thika Road potholes and Mombasa Road speed bumps. Buyers across Kenya collect the Green Lion Flex Cup Mag from our Nairobi CBD store or take countrywide pay-on-arrival delivery. Walk in and test the grip with your own phone and case before paying, or call to reserve a unit today.
Common Questions About the Green Lion Flex Cup Mag
Does the Green Lion Flex Cup Mag work if my phone has no built-in magnets?
Yes, but you need a magnetic ring or metal plate on the phone or case first. iPhone 12 and later models, plus Samsung and Xiaomi handsets in MagSafe-style cases, attach directly with no extra part. Android phones without magnets need a thin adhesive metal ring stuck to the case back, which costs a few hundred shillings. Mascom International stocks these rings and fits one for you in store so the alignment sits centred and the hold stays even.
Will the Green Lion Flex Cup Mag fit the cup holder in my car?
The base is rated for cup holders between 3 inches and 3.3 inches wide, which covers most Toyota, Nissan, Mazda, Subaru, and Honda models sold through Kenyan importers. That includes the Probox, Fielder, Axio, Note, Demio, Forester, and Vitz cup wells. Very narrow console cups on older compact models may sit tighter than the rated range. Bring your car to Kimathi Street or measure the cup opening across its widest point before ordering, and our team will confirm the fit.
How strong is the magnetic hold on rough Kenyan roads?
The mount uses 17 N52-grade neodymium magnets, the highest commercial grade of neodymium sold, arranged in a ring around the ball head. That array holds a 200-gram to 240-gram phone through the corrugations on Kangundo Road, unsealed Nyeri and Kajiado stretches, and Nairobi speed bumps. Sudden braking does not shake the phone loose. Heavier tablets and phones inside thick rugged cases over 3mm reduce the pull, since magnetic force drops sharply as the gap widens.
Can I use it if my phone already has a popsocket or ring grip?
Yes. Green Lion designed the head to sit clear of a popsocket or ring grip, so you do not have to peel anything off the case. Phones carrying a collapsed popsocket still meet the magnet face, and ring holders fold flat against the case without pushing the handset off centre. If your grip sits directly over the middle of the case back, move the magnetic plate slightly off centre so metal still meets metal cleanly.
Does the mount get in the way of the gear lever or handbrake?
The gooseneck arm bends away from the console, so you route it toward the dashboard rather than over the shifter. Most cars have the cup wells behind or beside the gear lever, which leaves the arm rising in front of the air vents. In manual vehicles, set the bend forward and slightly left of the driver so your hand path to the lever stays clear. Adjust once during setup and the arm keeps that shape.
Can I charge my phone while it sits on the mount?
Yes. The magnet ring holds the phone by the case back and leaves the charging port at the bottom edge completely open. Plug a USB-C or Lightning cable straight into the phone while it hangs on the head. Wireless charging is not built into this mount, so heavy Google Maps or Waze sessions on Safaricom or Airtel data still need a cable to the car charger. Mascom International stocks 20W to 45W car chargers separately.
Who should buy the Green Lion Flex Cup Mag?
Ride-hailing drivers, sales teams covering upcountry routes, logistics coordinators tracking loads on the Nairobi-Mombasa corridor, and anyone who checks Google Maps daily in traffic. It also suits families whose windscreen suction mount keeps dropping in the Nairobi dry season heat. Content creators filming dashboard clips get a stable low platform for the shot. If your car has no usable cup holder in the front console, choose a vent or dashboard mount instead.
How does it compare to a windscreen suction mount or a vent clip?
Suction pads rely on adhesive that softens above 40 degrees, which is normal inside a car parked in Nairobi sun. Vent clips block airflow and stress the vent slats, and they wobble when the fan runs. The Green Lion Flex Cup Mag transfers the whole load into the cup well, so nothing pulls on glass or plastic. The trade-off is that the phone sits lower, so you glance down rather than across.
Is the Green Lion Flex Cup Mag worth KSh 3,200 in Kenya's market?
At KSh 3,200 you get a 17-magnet N52 array, a metal-cored gooseneck, a 360-degree ball head, and a nylon and polycarbonate body, backed by a 6-month Mascom International warranty. Cheaper KSh 800 to KSh 1,500 mounts typically use six to ten weaker magnets and hollow plastic arms that droop within weeks on rough roads. Spread across two years of daily driving, this mount costs roughly KSh 4.40 a day.
Technical Specifications
Magnetic Holding System
- 17 neodymium magnets arranged around the head give more contact points than the six-magnet to ten-magnet mounts common at lower prices
- N52 grade is the strongest commercially produced neodymium, holding more pull per magnet than the N35 and N42 grades used in budget mounts
- Magnet ring aligns with the standard MagSafe circle, so iPhone 12 through iPhone 17 models snap into the centre position automatically
- Magnetic pull drops as case thickness rises, so thin cases under 2mm keep the phone steadier than thick rugged shells
- Attachment and release both happen one-handed, letting you lift the phone at a stop without unclipping anything
- Magnets sit under a moulded cover, so nothing metal touches your case back and scratches the finish
Rotation and Angle Adjustment
- 360-degree ball head turns the screen through a full circle, so portrait navigation switches to landscape video calls in one twist
- Ball joint also tilts, letting you angle the display up toward your eyeline rather than flat toward the roof
- Gooseneck arm bends and holds position, so the height you set on Monday is still there on Friday
- Arm flex lets short drivers pull the screen closer and taller drivers push it forward and down
- Repositioning takes about two seconds at a traffic light, with no screws, knobs, or locking rings to loosen
Cup Holder Base and Vehicle Fit
- Base is rated for cup holders measuring 3 inches to 3.3 inches across, covering most Japanese imports on Kenyan roads
- Fits the front console cup wells in the Toyota Probox, Fielder, Axio, Vitz, Nissan Note, Mazda Demio, and Subaru Forester
- Cup-well mounting keeps the windscreen clear, which matters for drivers stopped at NTSA checkpoints where obstructed glass draws questions
- Load sits low in the cabin, so vibration from potholes travels through the console rather than shaking a suction pad loose
- Base installs in under ten seconds with no adhesive, screws, or drilling, and lifts out cleanly when you sell the car
Device and Case Compatibility
- Works with iPhone 12 through iPhone 17 families, including Pro and Pro Max sizes, straight out of a MagSafe-ready case
- Samsung Galaxy S and A series, Xiaomi, Redmi, Oppo, Infinix, and Tecno handsets attach once a magnetic ring or plate is fitted
- Popsocket and ring-grip compatible, so you keep your existing grip accessory instead of peeling it off the case
- Handles phones roughly 140g to 240g, which spans the Galaxy A17 through the iPhone 17 Pro Max weight range
- Charging port stays clear at the bottom edge, so wired charging continues while the phone is mounted
- Not suited to tablets or 8-inch devices, since the mass exceeds what a cup-well gooseneck holds steady
Build Materials and Road Durability
- Nylon, polycarbonate, and TPU construction resists cracking better than the plain ABS used in low-cost cup mounts
- TPU contact surfaces cushion the base inside the cup well and stop rattle noise over rough tarmac
- Black finish hides dust from Mombasa Road and Thika Road better than lighter plastics that show every mark
- Materials tolerate the cabin heat of a car parked in direct Nairobi sun without softening or losing shape
- No adhesive pads in the design, so nothing dries out, peels, or leaves residue on your dashboard after a year
Installation and Daily Handling
- Setup takes under a minute: seat the base in the cup well, bend the arm, then place the phone on the head
- •No tools, no drilling, and no permanent marks, which suits leased vehicles and company fleet cars
- Moving the mount between two cars takes seconds, useful for households sharing one navigation setup
- Cleaning needs only a dry cloth on the magnet face, since dust between the case and head weakens the hold
- Model code GNFLXCUPMGBK identifies the black version for warranty claims and reordering
Package Contents
Every Green Lion Flex Cup Mag from Mascom International arrives sealed in the Green Lion retail box containing the cup-holder base with the attached gooseneck arm and magnetic ball head, plus Green Lion documentation. The mount ships in black. Phones without built-in magnets need a magnetic ring or adhesive metal plate, which Mascom International stocks separately and fits in store at the time of purchase.
Warranty
The Green Lion Flex Cup Mag carries a 6-month Mascom International warranty on manufacturing defects under normal use, covering the magnet assembly, the gooseneck arm, and the base. Claims are handled directly at our Nairobi CBD service desk, with no courier returns to an overseas centre and no waiting on a manufacturer queue.
Where to Buy the Green Lion Flex Cup Mag in Kenya
Green Lion Flex Cup Mag is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit the store Monday through Saturday, 9:00 AM to 7:00 PM, to test the magnetic hold with your own phone and case before you buy. Available colour: Black.
Order through any of the following:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the Green Lion Flex Cup Mag across all 47 Kenyan counties with pay-on-arrival delivery, so you only pay once the mount reaches you. Nairobi and its environs receive same-day delivery. All other major cities and towns, including Mombasa, Kisumu, Nakuru, and Eldoret, receive next-business-day delivery. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Every unit is covered by the 6-month warranty stated above, with claims coordinated at our Nairobi CBD counter.
Buyers across Kenya rely on Mascom International for accurate specifications, current Kenyan pricing, and direct after-sales support on every car mount and phone accessory we stock.