Anker PowerCore 10000 is now in stock at Mascom International for KSh 5,000, packing 10,000mAh (36Wh) of battery capacity into a 180-gram body that measures 92 x 60 x 22mm small enough to slip into a shirt pocket or the side pouch of a laptop bag. The Anker PowerCore 10000outputs up to 2.4 amps through a single USB-A port using Anker's PowerIQ and VoltageBoost charging technologies, charges its own internal cell through either USB-C or Micro-USB input, and ships with an 11-feature MultiProtect safety circuit that guards against short circuits, surges, and overheating. Walk into Mascom International at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD to pick up the Anker PowerCore 10000 today, or order for pay-on-arrival delivery to any of Kenya's 47 counties.
The Anker PowerCore 10000 is built for Kenya's mobile workforce sales representatives covering Westlands, Upper Hill, and Industrial Area client visits in a single day, university students moving between lecture halls at UoN, Kenyatta University, and Strathmore without reliable socket access, boda boda riders running M-Pesa transactions throughout 12-hour shifts, and field officers covering NGO routes through Turkana, Marsabit, and Garissa where mains power is intermittent. With Kenya Power load-shedding still affecting parts of Nairobi and upcountry towns, a 10,000mAh backup that recharges a typical 4,000mAh phone roughly 1.5 to 2 times before needing its own top-up keeps your communication, banking apps, and navigation tools running between outlets. The Anker PowerCore 10000 weighs about the same as a baseball, so it adds almost nothing to a backpack or handbag.
Unlike the unbranded 10,000mAh power banks flooding Kenya's electronics retailers many of which test at half their stated capacity the Anker PowerCore 10000 carries Anker's published 36Wh rating verified across more than 30 million units sold worldwide. Mascom International stocks the Anker PowerCore 10000 because Anker holds one of the lowest defect rates in the portable charger category at roughly 1.4% across 24 months. Customers across Kenya rely on Mascom International for honest battery capacity ratings, real warranty backing, and pay-on-arrival delivery that lets you inspect the sealed Anker PowerCore 10000 box before paying a single shilling.
Common Questions About theAnker PowerCore 10000
How many phone charges does the Anker PowerCore 10000 actually deliver?
The Anker PowerCore 10000 delivers roughly 1.8 to 2.5 full phone charges depending on your handset's battery size. A 4,000mAh phone like the Samsung Galaxy A17 or Tecno Camon series gets approximately 1.7 to 2 full charges from the Anker PowerCore 10000. Smaller batteries like the iPhone 15's 3,349mAh cell receive about 2.2 to 2.5 charges. Real-world output sits at roughly 60 to 70 percent of the rated 10,000mAh because of voltage conversion losses common to all portable batteries this is physics, not a defect.
Does the Anker PowerCore 10000 support fast charging for my phone?
The Anker PowerCore 10000 outputs up to 5V at 2.4A through its USB-A port, totaling 12 watts. This handles standard USB charging speeds for most phones sold in Kenya, including iPhones, Samsung Galaxy A series, Tecno, Infinix, and Redmi handsets at their baseline charging rates. The Anker PowerCore 10000 does not support Qualcomm Quick Charge or USB Power Delivery output, so phones with 25W, 33W, 67W, or 120W fast charging will charge at the slower 12W speed when connected to this power bank.
How long does the Anker PowerCore 10000 take to fully recharge?
The Anker PowerCore 10000 fully recharges in approximately 6 to 7 hours when connected to a 2-amp wall charger through either the USB-C or Micro-USB input port. Using a slower 1-amp charger (common with older phone chargers) extends the recharge time to roughly 10 to 12 hours. We recommend leaving the Anker PowerCore 10000 plugged in overnight at home or office to wake up to a full battery ready for the day.
Can I charge a laptop with the Anker PowerCore 10000?
The Anker PowerCore 10000 cannot charge most modern laptops. Its USB-C port functions as input only meaning the port accepts power to recharge the bank but does not output power to other devices. The single USB-A output port maxes out at 12 watts, which is below the 30W to 100W threshold most USB-C laptops require. The Anker PowerCore 10000 is purpose-built for phones, tablets, earbuds, smartwatches, and Bluetooth speakers not for MacBook, ThinkPad, or EliteBook charging.
Is the Anker PowerCore 10000 safe to carry on flights from JKIA?
TheAnker PowerCore 10000 meets airline carry-on regulations for lithium-ion batteries under 100Wh the unit's 36Wh rating sits well below the threshold. Take the Anker PowerCore 10000 in your hand luggage on Kenya Airways, Jambojet, Fly540, and international carriers departing JKIA, Wilson Airport, or Moi International Airport in Mombasa. Lithium batteries are not permitted in checked luggage on any commercial airline. Keep the Anker PowerCore 10000 in your backpack or handbag during the flight.
Why choose theAnker PowerCore 10000 over cheaper unbranded power banks?
The Anker PowerCore 10000 publishes verified capacity figures backed by independent testing, while many KSh 1,500 to 2,500 unbranded 10,000mAh power banks sold across Kenya measure at 4,000mAh to 6,000mAh in real output. The MultiProtect safety circuit guards against the battery swelling, short-circuit fires, and phone damage that have caused problems with low-grade alternatives. At KSh 5,000 from Mascom International, you also receive a 6-month warranty and a verified-genuine unit rather than a clone with copied branding.
What's included in the Anker PowerCore 10000 retail box?
The Anker PowerCore 10000retail box ships with the power bank, a Micro-USB recharge cable, a soft travel pouch, and Anker's user manual with warranty card. The phone-side cable for charging your device is not included bring your existing iPhone Lightning, USB-C, or Micro-USB cable to connect your phone to the Anker PowerCore 10000. Mascom International stocks compatible Anker, UGREEN, and Apple-certified cables separately if you need replacements.
How does the Anker PowerCore 10000 hold up to Kenya's heat and dust?
The Anker PowerCore 10000 uses a hard plastic shell with a textured matte finish that resists scratches, fingerprint marks, and the dust kicked up on Mombasa Road, Thika Superhighway, and rural routes through Nyeri, Eldoret, and Kakamega. The MultiProtect circuit includes temperature monitoring that throttles output if the unit gets too hot useful during direct sun exposure on construction sites or outdoor field work. Avoid leaving the Anker PowerCore 10000 inside a parked car under midday Mombasa or Kisumu sun, since sustained temperatures above 60°C shorten lithium-ion battery life across all brands.
Technical Specifications
Core Power Specifications
- 10,000mAh rated capacity stores 36Wh of energy, enough for roughly 1.8 to 2.5 full charges of typical Kenyan smartphones
- 3.6V nominal battery voltage with 5V regulated output through the USB-A port for standard phone charging compatibility
- Real-world output sits at 6,000 to 7,000mAh after voltage conversion losses, matching industry norms for all 10,000mAh power banks
- Lithium-ion polymer cell construction provides better thermal stability and slimmer form factor than older lithium-ion cylindrical cells
- Anker's published cycle rating supports approximately 500 full charge cycles before noticeable capacity degradation
Charging Inputs and Outputs
- Single USB-A output port delivers up to 5V at 2.4A (12W) for charging phones, tablets, earbuds, and small accessories
- USB-C input port accepts up to 5V at 2A for recharging the bank from modern laptop chargers, phone chargers, and power adapters
- Micro-USB input port provides backward compatibility with older chargers and cables Kenyan households already own
- PowerIQ technology automatically detects the connected device and adjusts output voltage and current for the right charging speed
- VoltageBoost compensates for cable resistance to maintain charging speed even with longer or lower-quality USB cables
Recharge Times and Power Source Options
- Approximately 6 to 7 hours for a full recharge using a 2A wall charger through the USB-C or Micro-USB input
- Roughly 10 to 12 hours using a 1A charger common with older phone power adapters
- Recharges from solar panels with USB output, useful for upcountry locations and field work in Turkana, Marsabit, and Lamu
- Charges from laptop USB ports during work, though this slower 0.5A to 1A input extends total recharge time
- Compatible with car USB chargers for topping up during long drives between Nairobi, Mombasa, Kisumu, and Eldoret
Safety and Protection Hardware
- MultiProtect safety system combines 11 protection features including short-circuit prevention, surge protection, and over-temperature shutoff
- Over-charge protection automatically stops input current when the internal cell reaches full capacity to protect long-term battery life
- Over-discharge protection prevents the cell from depleting below safe voltage levels that would damage the lithium-ion chemistry
- Temperature sensor throttles or pauses output if the unit overheats during use in direct sunlight or hot vehicle interiors
- Surge protection guards connected phones against voltage spikes from unstable power sources common with Kenya Power fluctuations
Build, Size, and Portability
- 92 x 60 x 22mm physical dimensions roughly match a deck of playing cards for pocket and handbag carry
- 180-gram weight (about 6.4 ounces) adds almost nothing to a daily backpack, briefcase, or laptop bag
- Hard plastic outer shell with textured matte finish resists scratches from keys, coins, and other items in pockets
- Four-LED battery status indicator on the front panel shows remaining charge in 25% increments at the press of a button
- TSA-compliant 36Wh capacity passes airline carry-on screening at JKIA, Wilson, and Moi International Airport in Mombasa
Device Compatibility Across Kenya's Mobile Market
- Charges all iPhone models from iPhone 6 through iPhone 17 series at standard USB speeds when paired with a Lightning or USB-C cable
- Compatible with Samsung Galaxy A, M, S, and Note series phones at 12W baseline charging speed without proprietary fast charging
- Charges Tecno, Infinix, Itel, Redmi, and Oppo handsets that dominate Kenya's mid-range and entry-level phone market
- Tops up Bluetooth earbuds including AirPods, Galaxy Buds, JBL Tune, and Soundcore models multiple times per single power bank charge
- Powers smartwatches, GoPro cameras, Insta360 cameras, and DJI Osmo Pocket devices using their respective USB charging cables
Anker PowerCore 10000 Package Contents
The Anker PowerCore 10000 retail box from Mascom International contains:
- Anker PowerCore 10000 power bank
- Micro-USB recharge cable (60cm length)
- Soft travel pouch for protected carry in bags and pockets
- Anker user manual with quick-start instructions
- Mascom International warranty card
- Anker welcome guide
The phone-to-bank charging cable (Lightning, USB-C, or Micro-USB) is not included in the standard Anker retail box use your existing phone cable, or pick up a compatible cable from Mascom International's accessory range.
Warranty Coverage
The Anker PowerCore 10000 carries a 6-month Mascom International warranty on manufacturing defects, including battery cell failure, port damage from normal use, and circuit faults that prevent charging or output. Anker's global 18-month manufacturer warranty also applies for international claims. Bring proof of purchase from Mascom International to our Nairobi CBD service desk for any warranty assessment. Damage from liquid contact, drops, or use with non-standard chargers falls outside warranty coverage.
Where to Buy the Anker PowerCore 10000 in Kenya
The Anker PowerCore 10000 is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit our store Monday through Saturday between 9:00 AM and 7:00 PM to handle the Anker PowerCore 10000 before purchase. Available colors: Black.
Three ways to order:
- Call +254 708 852 521
- Email info@mascomintl.com
- Order through www.mascomintl.com
Mascom International ships the Anker PowerCore 10000 across all 47 Kenyan counties with pay-on-arrival delivery you only pay when the package reaches you and you have inspected the sealed box. Nairobi, Mombasa, Kisumu, Nakuru, and Eldoret receive next-business-day delivery. Remote counties including Turkana, Marsabit, Garissa, Wajir, Mandera, and Lamu receive delivery within 2-3 business days.
The Anker PowerCore 10000 carries a 6-month Mascom International warranty covering manufacturing defects under normal use. Our Nairobi CBD service desk handles warranty claims directly without sending units overseas.
Buyers across Kenya rely on Mascom International for accurate capacity ratings, verified-genuine Anker stock, current Kenyan pricing, and direct after-sales support from our Kimathi Street store. Pick up the Anker PowerCore 10000 today and stop worrying about a dead phone battery in the middle of a workday.
