Payment Methods
1. Lipa Na M-PESA
Paybill No.: 5450522
Account No.: M
2. Cash on delivery
3. Cash on collection
oraimo SmartClipper 2C Professional Hair Clipper | 6000 RPM Motor | Zero-Gap Stainless Steel Blades | 2.5-Hour Runtime | Type-C
Cordless Grooming Tool with Four Adjustable Combs from 3mm to 13mm for Barbers and Home Users Across Kenya
Condition: New
Note: price and availability are subject to change without prior notice
oraimo SmartClipper 2C Professional Hair Clipper is now in stock at Mascom International for KSh 2,800, built around a 6000 RPM motor, zero-gap adjustable stainless steel blades, four guide combs covering 3mm to 13mm, and a 3.7V 2000mAh battery rated for 2.5 hours of cordless cutting. Model OPC-CL30C reaches our store at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD in sealed oraimo retail packaging. The oraimo SmartClipper 2C recharges over Type-C in 3.5 hours and carries a 4.8-star average across more than 380 verified reviews on oraimo's own store.
Kenya's kinyozi operators, barbers running shops around Nairobi CBD, Eastlands, Kisumu, and Nakuru, and men who cut at home all fight the same three problems: budget clippers tug at coarse hair, run flat halfway through a fade, and go blunt inside a few months. The oraimo SmartClipper 2C answers each one. The 6000 RPM motor holds blade speed steady through thick, curly hair. The 2000mAh cell covers roughly eight to ten full haircuts between charges. Students at Kenyatta University, Moi University, and JKUAT hostels use the oraimo SmartClipper 2C for quick trims between classes.
Unlike other electronics retailers in Kenya who stock unbranded clippers with no service backing, Mascom International sells the oraimo SmartClipper 2C with genuine oraimo packaging, an authentication code, and after-sales support handled from our Nairobi CBD desk. At KSh 2,800 the oraimo SmartClipper 2C sits well under corded Wahl and Andis units that start near KSh 8,000, and clearly above the KSh 1,000 no-name clippers that die within a year. Users consistently report low vibration and quiet running. Walk into Kimathi Street to handle the clipper yourself, or order for pay-on-arrival delivery to any of Kenya's 47 counties.
Common Questions About the oraimo SmartClipper 2C
Is the oraimo SmartClipper 2C good enough for a working barber, or is it a home clipper?
Working barbers use it. The 6000 RPM motor speed and zero-gap blade adjustment are the two things that separate shop tools from home tools, and the oraimo SmartClipper 2C has both. Its 2.5-hour runtime carries a busy kinyozi through most of a day without a mid-shift charge. That said, barbers cutting fifteen or more heads daily should still keep a second unit charged, as any cordless clipper at this price runs one battery. For home users, the same hardware simply lasts far longer between charges.
How long does the oraimo SmartClipper 2C battery actually last on one charge?
oraimo rates the 3.7V 2000mAh battery at 2.5 hours of continuous running, which is 150 minutes of blade time. A standard fade and line-up takes roughly 15 to 20 minutes, so one full charge covers about eight to ten haircuts. A full recharge takes 3.5 hours over the bundled Type-C cable. For a home user cutting twice a month, that means charging roughly once a quarter. For a kinyozi, it means plugging in overnight and starting each day full.
Will the oraimo SmartClipper 2C cut coarse, thick Kenyan hair without pulling?
Yes. Two things handle coarse hair here: motor speed and blade sharpness. The 6000 RPM motor keeps the moving blade travelling fast enough that hair is cut rather than dragged, which is exactly where slow budget clippers pull. The stainless steel blade set (46 x 38.5 x 4.5mm fixed, 40 x 22 x 2.9mm moving) is ground sharp from the factory. Reviewers across West and East Africa specifically note snag-free cutting on thick, curly hair. Keep the blades oiled and the pulling stays away.
What does zero-gap adjustment mean, and why does it matter for fades?
Zero-gap means you can bring the moving blade almost flush with the fixed blade using the taper lever on the side of the oraimo SmartClipper 2C. Closing that gap cuts closer to the skin, which is how barbers get clean lines, sharp edges, and bald fades. Opening the lever leaves the cut slightly longer. Because the lever moves between comb steps, you can blend two comb lengths smoothly instead of leaving a visible line. That single control does most of the fading work.
What guide comb sizes come with the oraimo SmartClipper 2C?
Four combs ship in the box: 3mm, 6mm, 9mm, and 13mm. In barber shorthand that maps roughly to a number 1, number 2, number 3, and number 4. The 3mm comb handles low fades and sides. The 6mm and 9mm combs cover the mid-section blend. The 13mm comb is for the top or an all-over even cut. Combined with the taper lever, the four combs cover almost every cut requested in a Kenyan kinyozi.
Can I use the oraimo SmartClipper 2C during a power blackout?
Yes, because the oraimo SmartClipper 2C is fully cordless and runs entirely off its internal 2000mAh battery. A charged unit gives 150 minutes of cutting regardless of what the grid is doing, which matters for kinyozi owners in areas with unstable supply. Charging happens over Type-C, so a 20W phone charger, a laptop USB-C port, or a power bank all work.
How does the oraimo SmartClipper 2C differ from the oraimo Smart Clipper 2 Gold?
The Gold model steps up in three ways: a 2500mAh battery instead of 2000mAh, roughly 240 minutes of runtime instead of 150, DLC-coated blades instead of plain stainless steel, and an LED battery percentage display. The oraimo SmartClipper 2C skips the display and the coated blades to hit KSh 2,800. If you cut at home or run a small kinyozi, the 2C covers the work. If you cut all day and want blade coating that stays sharp longer, look at the Gold.
Is the oraimo SmartClipper 2C worth KSh 2,800 in Kenya's market?
At KSh 2,800 it undercuts corded Wahl and Andis clippers that open around KSh 8,000 and sits above the KSh 800 to KSh 1,200 generic clippers sold in Nairobi's downtown stalls. What KSh 2,800 buys is a named brand with a Kenyan authentication check, a 6000 RPM motor, a real taper lever, and four combs. Across a two-year life, that works out under KSh 4 per day. Pay on arrival through Mascom International and inspect it before any money changes hands.
Technical Specifications
Motor Speed and Cutting Action
- 6000 RPM motor drives the moving blade fast enough to cut coarse hair instead of dragging it
- Rated for all hair types, from fine straight hair to thick, tightly curled Kenyan hair textures
- Steady blade speed under load, which is what stops the tugging common on cheaper budget clippers
- Reviewers report noticeably low vibration and quiet operation compared with generic clippers at this price
- Cordless-only operation means no cable snagging around the chair during a fade
- Motor sits inside a sealed housing that keeps clipped hair out of the internal assembly
Blade Hardware and Zero-Gap Taper Control
- Stainless steel blade set arrives sharp from the factory and holds an edge with regular oiling
- Fixed blade measures 46 x 38.5 x 4.5mm, giving a wide cutting swathe that covers heads faster
- Moving blade measures 40 x 22 x 2.9mm and rides across the fixed blade for a clean shear
- Zero-gap adjustment brings the blades nearly flush for skin-close lining, edging, and bald fades
- Side-mounted taper lever changes cut closeness between comb steps, letting you blend without visible lines
- Blades are replaceable, so a worn set does not mean replacing the whole clipper
Guide Comb Range and Length Settings
- Four guide combs included: 3mm, 6mm, 9mm, and 13mm, roughly matching barber numbers 1 through 4
- 3mm comb handles low fades, sides, and the back of the neck on short cuts
- 6mm and 9mm combs cover the transition zone where most fading and blending work happens
- 13mm comb suits the top section or a single-length all-over cut at home
- Combs clip on and off the blade head without tools, so switching mid-cut takes seconds
- Taper lever fills the gaps between comb steps, widening the practical length range beyond four fixed settings
Reliable Battery and Type-C Charging
- 3.7V 2000mAh lithium battery rated by oraimo for 2.5 hours of continuous cutting time
- 150 minutes of runtime equals roughly eight to ten full haircuts before the unit needs a charge
- Full recharge takes 3.5 hours using the Type-C cable supplied in the box
- Type-C means the same cable that charges your phone tops up the clipper, so no proprietary brick
- Charges from a wall adapter, a laptop USB-C port, or a power bank during Kenyan grid outages
- Cordless running removes the extension-cable clutter that corded shop clippers bring to a small kinyozi
Build Materials, Size and Daily Handling
- PC and ABS plastic body resists the knocks a clipper takes on a busy barber counter
- Measures 195 x 54 x 42.5mm, a hand-filling size that stays controllable during long fading sessions
- Light enough that wrist fatigue does not build over back-to-back cuts through a Saturday rush
- Textured grip section keeps the clipper steady when hands pick up talc, oil, or sweat
- Sealed body panels keep clipped hair out and make brushing down between clients quick
- Model number OPC-CL30C is printed on the unit for warranty claims and oraimo authentication checks
Maintenance Tools and Long-Term Care
- Cleaning brush included for sweeping cut hair out of the blade teeth after every client
- Lubricant oil included: two or three drops on the blades before each session keeps cutting smooth
- Oiling is the single biggest factor in blade life, and dry blades are the main cause of pulling
- Brush the blade head, then oil, then run the clipper for five seconds to spread the oil evenly
- Store the unit dry, since coastal humidity in Mombasa, Diani, and Watamu accelerates blade corrosion
- Recharge every two to three months even when idle, as lithium cells degrade when left fully flat
Package Contents
The oraimo SmartClipper 2C ships in sealed oraimo retail packaging containing:
- oraimo SmartClipper 2C hair clipper (model OPC-CL30C)
- 4 guide combs: 3mm, 6mm, 9mm, and 13mm
- Cleaning brush
- Type-C charging cable
- Lubricant oil
- Welcome guide and warranty documentation
Note: oraimo does not include a wall adapter in the box. Any 5V USB-C charger you already own works, and Mascom International stocks oraimo PowerCube adapters separately if you need one.
Warranty
The oraimo SmartClipper 2C carries a 6-month Mascom International warranty on manufacturing defects. Every unit ships with an oraimo authentication code you can verify on oraimo's official Kenya site before use. Our Nairobi CBD service desk handles warranty claims directly, and oraimo's Carlcare service network across Kenya provides an additional support channel.
Where to Buy the oraimo SmartClipper 2C in Kenya
The oraimo SmartClipper 2C is available now at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, to hold the clipper, test the taper lever, and check the blade set before you buy. Available color: Black.
Order through any of these:
- Phone and WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the oraimo SmartClipper 2C to all 47 Kenyan counties with pay-on-arrival delivery, so you inspect the unit and pay only once it reaches you. Nairobi and its environs receive same-day delivery. Other major cities and towns, including Mombasa, Kisumu, Nakuru, Eldoret, Nyeri, Meru, Thika, and Kakamega, receive delivery in 1 day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 days.
Barbers and home users across Kenya rely on Mascom International for honest specifications, current KSh pricing, and direct after-sales support on every grooming tool we stock.
Disclaimer: We can not guarantee that the information on this product is 100% correct
Full description here
SOCIAL MEDIA