Payment Methods
1. Lipa Na M-PESA
Paybill No.: 5450522
Account No.: M
2. Cash on delivery
3. Cash on collection
HP EliteBook x360 1030 G3 Screen Assembly | 13.3-Inch FHD Touch Display, Complete Hinge-Up Unit, Nairobi CBD Fitting Available
Cracked glass, black patches, or an unresponsive digitizer solved with an original-specification part
Condition: New
Note: price and availability are subject to change without prior notice
HP EliteBook x360 1030 G3 screen assembly is now in stock at Mascom International for KSh 34,000, covering the full 13.3-inch 1920 x 1080 touch panel with bezel, back cover, hinges, and display cable already fitted. This is a hinge-up unit, not a bare panel, so the whole lid section swaps across in one piece. Mascom International stocks it at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, and matches the part to your machine before you pay. Common HP part references include L31870-001, L31868-001, L31869-001, and L31871-001, depending on the panel your unit originally shipped with.
A broken lid is the most common reason an otherwise healthy HP EliteBook x360 1030 G3 sits unused in a Nairobi office drawer. Lawyers at Milimani Law Courts, accountants working through KRA filing deadlines, and university students at Strathmore and USIU all carry this convertible daily. A single drop during a matatu commute or a knock inside a laptop bag cracks the glass. Once the digitizer stops responding, tent and tablet modes go dead and the machine loses the reason it was bought. Fitting a new display assembly restores full use for a fraction of what a replacement business convertible costs.
Unlike other electronics retailers in Kenya that sell a loose panel and leave the customer chasing bezels, hinges, and cables separately, Mascom International supplies the HP EliteBook x360 1030 G3 screen assembly as one tested unit. Our technicians fit it at the Kimathi Street workshop, usually the same day you walk in. Customers across Nairobi report that a finished swap takes under two hours, with the laptop checked for touch response, hinge tension, and backlight evenness before handover. Buy the HP EliteBook x360 1030 G3 assembly over the counter, or order it for pay-on-arrival delivery to any of Kenya's 47 counties.
Common Questions About the HP EliteBook x360 1030 G3 Screen Assembly
What exactly does KSh 34,000 cover?
The KSh 34,000 covers the complete display assembly: the 13.3-inch FHD touch panel, the digitizer glass, the plastic and metal bezel, the aluminium back cover, both hinges, and the display cable, all pre-assembled. You are not buying a loose panel that still needs parts. Fitting at our Kimathi Street workshop is quoted separately and depends on the machine's condition. Delivery to your county is pay-on-arrival, so nothing leaves your M-Pesa account until the assembly reaches you and you have inspected the packaging.
Will this assembly fit my HP EliteBook x360 1030 G3?
It fits the HP EliteBook x360 1030 G3 chassis specifically. It does not fit the 1030 G2, the 1030 G4, or the larger 1040 series, because the lid dimensions, hinge placement, and cable pinouts differ between those models. Before payment, send us a photo of the service label on the underside of your laptop. That label carries the product number and serial, which we cross-check against HP part references such as L31870-001 and L31871-001 to confirm the correct panel type for your unit.
Does the touch layer and pen input still work after replacement?
Yes. The digitizer is bonded into the assembly, so ten-point touch returns exactly as it worked from new, including pinch, swipe, and on-screen handwriting. Tent, stand, and tablet modes all function again once the hinges are seated correctly. Pen behaviour depends on the pen you already own and the configuration your laptop shipped with. Bring the pen to the Kimathi Street store during fitting and our technicians confirm tracking, pressure response, and button mapping before you leave with the machine.
Can I fit this screen myself, or should Mascom do it?
You can fit it yourself if you have torx and plastic pry tools, an anti-static mat, and experience opening a convertible chassis. The 1030 G3 lid uses a captive antenna and camera cable run that tears easily if the hinges are lifted at the wrong angle. Most customers ask us to fit it. Our Nairobi CBD workshop handles the swap on a bench, tests the finished unit, and returns the laptop the same day. Booking ahead by WhatsApp keeps the wait short.
How is a full assembly different from buying just the LCD panel?
A bare panel is only the glass and backlight layer. On a convertible like the 1030 G3, the panel is direct-bonded to the digitizer and bezel, so separating them cleanly needs heat, jigs, and adhesive most Kenyan repair shops do not stock. Attempted separations often crack the new glass. The hinge-up assembly avoids all of that: it arrives with the hinges and cable already attached, so the technician disconnects the old lid and bolts on the new one.
Does it match the 4K UHD or Sure View privacy configuration?
The standard stocked unit is the 13.3-inch FHD 1920 x 1080 touch panel, which covers most HP EliteBook x360 1030 G3 machines sold in Kenya. HP also built this model with a 4K UHD panel and with the Sure View integrated privacy screen, and both use different part numbers and different cables. Tell us which configuration you have before ordering. Mascom International sources the UHD and Sure View versions on request, with pricing and lead time confirmed at the time of order.
How long does the replacement take at your Kimathi Street store?
Most swaps finish within two hours of the laptop reaching our bench, and machines dropped off in the morning are usually ready the same afternoon. The workshop is open Monday to Saturday, 9:00 AM to 7:00 PM. Testing adds roughly twenty minutes: the technician runs a full-white and full-black screen check for dead pixels and light bleed, cycles the lid through all four modes, and confirms touch across the whole surface before signing the job off.
Is a screen replacement worth it on a laptop this old?
For a working HP EliteBook x360 1030 G3 with a healthy battery and SSD, yes. The chassis carries a quad-core Intel processor, 8GB or 16GB of soldered memory, and Thunderbolt 3, which still handles document work, video calls, and browser-heavy workloads without complaint. Spending KSh 34,000 on a display returns a fully usable business convertible at well under the cost of a new one. If the board or hinges are already damaged, our technicians will tell you before you commit.
Technical Specifications
Display Panel and Resolution
- 13.3-inch diagonal IPS panel at 1920 x 1080, matching the resolution most 1030 G3 units shipped with from factory
- LED backlight with even illumination across the surface, checked for bleed and dark corners before the unit leaves our bench
- IPS technology holds colour accuracy at wide viewing angles, which matters when the lid is folded into tent mode for a presentation
- Direct-bonded construction places the glass against the panel with no visible air gap, cutting reflection under Nairobi's midday office lighting
- Panel references commonly used on this chassis include M133NVF3 and equivalent 13.3-inch FHD substitutes approved for the same part numbers
- Glossy and anti-glare finishes both exist for this model; tell us which one your laptop currently uses so the replacement matches
Touch Digitizer and Input Response
- en-point capacitive digitizer bonded into the assembly, restoring pinch, swipe, scroll, and multi-finger gestures exactly as they worked from new
- Toughened cover glass sits over the digitizer layer, giving the same scratch resistance the original lid carried out of the box
- Touch calibration is handled by Windows on first boot, with no separate driver installation needed in almost every case
- Pen tracking returns for owners using an HP Active Pen, subject to the pen model and the original configuration of the machine
- Digitizer failure without visible cracking is common after liquid ingress, and the assembly resolves both faults in a single part
- Our technicians test every corner and edge of the touch surface before handover, not just the centre of the screen
Model Compatibility and Part References
- Built specifically for the HP EliteBook x360 1030 G3 chassis and no other generation in the EliteBook x360 family
- Cross-referenced against HP part numbers L31870-001, L31868-001, L31869-001, and L31871-001, which cover the variants of this lid
- Does not fit the EliteBook x360 1030 G2, the 1030 G4, or any 1040 model, because hinge spacing and cable pinouts differ
- Send the product number from the service label under your laptop and we confirm compatibility in writing before you pay anything
- Silver lid finish matches the standard EliteBook x360 1030 G3 body colour sold across the Kenyan market
- Non-touch and Sure View privacy variants exist on this chassis and carry separate part numbers; both are sourced on request
Hinge-Up Construction and Included Hardware
- Supplied as a full lid section with bezel, aluminium back cover, both hinges, and display cable already attached and routed
- Hinge tension arrives set from the factory, so the lid holds any angle through the full 360-degree rotation without drooping
- Pre-routed webcam and antenna channels sit in the correct positions, cutting installation time and reducing the chance of a pinched cable
- Screw holes and mounting points line up with the original chassis threads, requiring no drilling, filing, or adhesive work
- Assembly weight closely matches the original lid, so the laptop keeps its balance when opened past ninety degrees on a desk
- Shipped in fitted protective packaging with corner padding, which matters for the road journey to counties outside Nairobi
Installation and Fitting Requirements
- Fitting requires T5 torx drivers, plastic spudgers, and an anti-static wrist strap, all standard in a proper repair workshop
- The old lid must be disconnected at the board before the hinges are unbolted, or the display cable tears at the connector
- Battery disconnection is a required first step on the 1030 G3, since the board stays live even with the laptop shut down
- Mascom International fits the assembly at our Kimathi Street workshop, usually within two hours of the machine reaching the bench
- Self-fitting is possible for experienced technicians, and we supply the correct torque points and cable routing notes on request
- Machines with prior water damage or a bent chassis need assessment first, because a warped base stops the new lid closing flat
Testing, Grading, and Fault Checks
- Every assembly is powered up and checked on a test rig before it is sold, not simply passed on in its sealed box
- Dead pixel screening follows the ISO 13406-2 standard used across the display parts trade, so you are not gambling on the panel
- Full-white and full-black screens are run to expose stuck subpixels, backlight bleed, and uneven brightness across the surface
- Touch response is swept across all four edges and the centre, since edge dead zones are the most missed digitizer fault
- Hinges are cycled through the full 360-degree range to confirm smooth motion and correct resistance at every stopping point
- Any unit failing a check is pulled from stock, which is why our replacement rate on fitted assemblies stays low
Package Contents
- HP EliteBook x360 1030 G3 display assembly with panel, digitizer, bezel, and back cover pre-assembled
- Both left and right hinges attached and pre-tensioned
- Display cable, webcam cable channel, and antenna routing already in place
- Protective moulded packaging with corner padding for transport to any Kenyan county
- 6-month Mascom International warranty card
- Fitting notes covering torque points and cable routing, supplied on request for self-installers
Note: this is a service part, not a retail consumer box, so it does not include a manufacturer sleeve, manuals, or tools. Screwdrivers and pry tools are stocked separately at Mascom International.
Warranty
The HP EliteBook x360 1030 G3 screen assembly carries a 6-month Mascom International warranty covering manufacturing defects, including panel failure, backlight faults, and digitizer malfunction under normal use. Physical damage, cracked glass after fitting, and liquid ingress are not covered. Warranty claims are handled directly at our Nairobi CBD service desk, and assemblies fitted by our own technicians are logged against the job sheet for faster processing.
Where to Buy the HP EliteBook x360 1030 G3 Screen Assembly in Kenya
The HP EliteBook x360 1030 G3 screen assembly is available now at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, with your laptop and we confirm the correct part against your service label before you pay. Stocked lid finish is silver, matching the standard EliteBook x360 1030 G3 body.
Order through any of the following:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships this assembly across all 47 Kenyan counties with pay-on-arrival delivery, so you pay only once the part reaches you. Nairobi and its environs receive same-day delivery. All other major cities and towns, including Mombasa, Kisumu, Nakuru, Eldoret, and Nyeri, receive next-business-day delivery. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Every assembly is backed by the 6-month warranty above, with claims handled at our Nairobi CBD service desk.
Send a photo of your service label on WhatsApp and our technicians confirm the right part before you commit a shilling. Buyers across Kenya rely on Mascom International for correctly matched spare parts, honest pricing, and repair work that is tested before it leaves the bench.
Disclaimer: We can not guarantee that the information on this product is 100% correct
Full description here
SOCIAL MEDIA