Payment Methods
1. Lipa Na M-PESA
Paybill No.: 5450522
Account No.: M
2. Cash on delivery
3. Cash on collection
UGREEN CM372 38-in-1 Screwdriver Set | 36 CR-V Bits | Aluminium Alloy Handle | Magnetic Extension Bar
Precision repair toolkit for phone technicians, laptop shops, drone owners, and home gadget fixers across Kenya
Condition: New
Note: price and availability are subject to change without prior notice
UGREEN CM372 38-in-1 Screwdriver Set is available now at Mascom International for KSh 2,000, brand new and sealed, carrying 36 chrome vanadium steel bits, a 94mm aluminium alloy handle, and a 60mm magnetic extension bar inside an automatic flip-cover case. The UGREEN CM372 covers Phillips, flathead, Torx, pentalobe, tri-wing, spanner, and star heads in sizes down to 0.8mm. That range is exactly what phone and laptop teardowns demand. Buy the UGREEN CM372 38-in-1 Screwdriver Set in person at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, or order it for pay-on-arrival delivery anywhere in Kenya.
This set was built for people who open devices for a living. Phone repair technicians along Luthuli Avenue, laptop service shops in Nairobi CBD, IT support staff maintaining office fleets, drone and camera owners, and university students studying electronics all face the same problem: the wrong bit size rounds off a screw head, and a rounded pentalobe screw on an iPhone bottom edge turns a 20-minute job into a drilling exercise. Cheap unbranded kits sold in bulk use soft steel that deforms on the second or third use. The UGREEN CM372 answers that with hardened, heat-treated bits sized to the fasteners you actually meet.
Unlike typical accessory retailers in Kenya who stock generic no-name kits with unlabelled bits, Mascom International sells the UGREEN CM372 38-in-1 Screwdriver Set with the full bit chart, verified sizes, and a 6-month warranty behind it. Technicians consistently report that the magnetised handle tip holds a 1.2mm screw steady long enough to start a thread inside a cramped laptop chassis. Handle the UGREEN CM372 at our Kimathi Street counter, press the flip-cover button, and check the bit fit against your own device before paying. Countrywide delivery reaches all 47 counties.
Common Questions About the UGREEN CM372 38-in-1 Screwdriver Set
What screws can the UGREEN CM372 actually open?
The 36 bits cover seven head families found in consumer electronics. Phillips runs 1.0, 1.5, 2.0, 2.5 and 3.5. Flathead runs 1.0 through 4.0. Pentalobe covers 0.8 and 1.2, the two sizes Apple uses on iPhone bottom screws and MacBook bases. Torx spans T3 to T10 plus T15 and T20. Tri-wing offers 0.8 and 2.0 for game consoles and older laptops. A 1.6 spanner bit and two star bits complete the tray.
Will this set open iPhone and MacBook screws?
Yes. The 0.8mm pentalobe bit fits the two screws either side of an iPhone charging port, and the 1.2mm pentalobe fits MacBook bottom-case screws. Tri-point and Phillips 1.2 bits handle internal battery brackets and shields. What the set does not include is a suction cup, opening picks, or a heat pad, so plan on buying those separately for screen removals. Mascom International stocks opening tools at the Kimathi Street counter.
How strong are the bits, and will they round off?
The bits are forged from chrome vanadium steel and heat-treated, which is the same material class used in mid-tier automotive hand tools. Hardness matters most on small Torx and pentalobe heads, where a soft bit twists before the screw moves. Technicians running daily repairs report the CM372 bits holding their edge across months of use. They will still wear eventually. Seat the bit fully, apply downward pressure, and turn slowly rather than fast.
What is the magnetic extension bar for?
The 60mm magnetic extension bar bridges the gap between the handle and screws sitting deep inside a chassis. Recessed screws in desktop towers, DVR housings, projector mounts, and CCTV camera brackets sit too far down for a stubby handle to reach. The bar also magnetises the bit, so a loose screw lifts out instead of dropping onto a motherboard. Total working length with the bar fitted reaches roughly 154mm from cap to bit tip.
Is KSh 2,000 fair for a 38-in-1 set in Kenya?
At KSh 2,000 the cost works out to about KSh 55 per bit, with the handle, extension bar, and case included free at that maths. Unbranded 25-piece kits sell for KSh 700 to KSh 1,200 but use unhardened bits and unlabelled sizes. The Xiaomi and Wiha precision kits run KSh 3,500 upward. The CM372 sits between the two, which suits a technician who needs working tools without a hobby-grade price.
Who should buy this set, and who should skip it?
Buy it if you repair phones, laptops, tablets, consoles, drones, cameras, or CCTV gear regularly, or if you maintain your own household electronics. Skip it if your work is furniture assembly, plumbing, or vehicle repair, where larger drivers and higher torque matter more than 4mm bit shanks. This is a small-fastener tool. Forcing it onto a seized 6mm bolt will twist a bit and void the warranty cover on manufacturing defects.
How does it compare to the cheap kits sold around Luthuli Avenue?
The visible difference is labelling and bit hardness. Generic trays ship with unmarked bits, so you test three before finding the right fit, and the soft tips cam out under load. Every CM372 bit sits in a numbered slot with a printed size. The aluminium alloy handle also spins on a rotating cap, letting your index finger apply pressure while your thumb and forefinger turn. Generic plastic handles usually lack that cap.
Can I carry it in a laptop bag for field jobs?
Yes. The case measures small enough for a laptop compartment or a toolbag side pocket, and the whole kit weighs roughly 270 grams with packaging. The flip cover locks shut with a button catch, so bits do not scatter across your bag during a matatu ride to a client site in Westlands or Industrial Area. Pressing the button opens the lid and stands the case upright on a desk for bench work.
How do I buy it and pay from outside Nairobi?
Order by calling or messaging +254 708 852 521 on WhatsApp, emailing info@mascomintl.com, or ordering through www.mascomintl.com. Mascom International ships the set to all 47 counties with pay-on-arrival delivery, so you inspect the sealed pack and count the bits before releasing payment. Payment is accepted by M-Pesa or cash at handover. Nairobi and its environs receive the set the same day when ordered during store hours.
Technical Specifications
Bit Range and Head Types
- 36 bits total, spanning Phillips, flathead, Torx, pentalobe, tri-wing, spanner, and star fastener families
- Phillips sizes 1.0, 1.5, 2.0, 2.5 and 3.5 cover phone shields, laptop bases, and appliance panels
- Flathead sizes 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 handle terminal blocks, radios, and older hardware
- Torx range T3 through T10 plus T15 and T20 matches hard drives, consoles, and laptop hinges
- Pentalobe 0.8 and 1.2 open iPhone bottom screws and MacBook base panels without stripping heads
- Tri-wing 0.8 and 2.0 plus a 1.6 spanner bit cover consoles, remotes, and tamper-resistant fasteners
Handle Design and Everyday Handling
- Aluminium alloy handle measures 94mm long, sized for a full grip rather than a fingertip pinch
- Rotating cap at the handle base lets one finger press down while the other fingers turn
- Knurled grip pattern keeps the handle from slipping in warm, humid Mombasa and coastal workshop conditions
- Metal body resists the cracking and flexing that plastic handles show after a few months of bench use
- Handle diameter suits sustained torque on 2.0mm Phillips screws without cutting into the palm
- Weight distribution favours control over force, which is what small electronics fasteners actually need
Magnetic Features and Screw Retention
- 60mm magnetic extension bar reaches recessed screws inside desktop towers, DVR housings, and camera brackets
- Magnetised front end of the handle holds bits firmly so they do not drop mid-turn
- Bit magnetisation lifts loose screws clear of motherboards, cutting the risk of a shorted board
- Combined handle and bar length reaches roughly 154mm for deep chassis work in tight spaces
- Magnetism strength is moderate by design, strong enough for M1.2 screws yet safe near circuitry
- Extension bar detaches in one pull, so switching between shallow and deep screws takes seconds
Materials and Bit Hardness
- Chrome vanadium steel bits are forged then heat-treated, raising hardness at the tip where wear starts
- Bit shank measures 4mm diameter by 28mm length, the common standard across precision driver kits
- Hardened tips resist cam-out on Torx and pentalobe heads, the two families most prone to rounding
- Steel composition resists surface rust in Kenya's humid coastal and lakeside climates with basic dry storage
- Bits accept moderate torque only; larger bolts and seized fasteners need a full-size driver instead
- Replacement bits are not sold individually in Kenya, so treat the tray as a matched kit
Device Compatibility Across Repairs
- Handles Android and iPhone teardowns, including screen brackets, battery pull-tabs, and charging port assemblies
- Laptop work covers HP, Lenovo, Dell, and Apple base panels, RAM doors, and keyboard fastenings
- Console repairs on PlayStation and Nintendo hardware use the tri-wing and Torx bits directly
- Drone, action camera, and DSLR body panels fall inside the 0.8mm to 2.0mm bit range
- CCTV cameras, NVR housings, routers, and set-top boxes open with the Phillips and Torx sets
- Eyeglass hinges, watch backs, and small appliances round out household use beyond the workbench
Storage Case and Portability
- Automatic flip-cover case opens at the press of a button and stands upright on a desk
- Fitted tray slots hold every bit in a printed, numbered position for fast size identification
- Button catch locks the lid shut, keeping bits contained during transport in bags and toolboxes
- Case footprint fits a laptop bag compartment or a technician's field pouch without bulk
- Total shipped weight sits around 270 grams, light enough for daily carry on foot or by boda boda
- Closed case shields bits from dust, which matters on dry-season Nairobi sites and upcountry job visits
Package Contents
The UGREEN CM372 retail pack from Mascom International contains one aluminium alloy handle with rotating cap, one 60mm magnetic extension bar, 36 chrome vanadium steel bits seated in the fitted tray, the automatic flip-cover storage case, and UGREEN product documentation. No power tool, suction cup, opening pick, or spudger ships with this kit. Mascom International stocks phone opening tools, anti-static tweezers, and repair mats separately at the Kimathi Street counter for technicians building a complete bench setup.
Warranty
The UGREEN CM372 38-in-1 Screwdriver Set carries a 6-month Mascom International warranty on manufacturing defects under normal use. Cover applies to handle mechanism failure, extension bar magnetism loss, and case hinge breakage. Bit wear from heavy daily use, twisted bits from oversized fasteners, and rust from wet storage fall outside the cover. Our Nairobi CBD service desk processes claims directly.
Where to Buy the UGREEN CM372 38-in-1 Screwdriver Set in Kenya
UGREEN CM372 38-in-1 Screwdriver Set is in stock now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, press the flip-cover button yourself, and test a T5 or 0.8mm pentalobe bit against your own device before you pay.
Order through any of the following:
- Phone/WhatsApp: +254 708 852 521
- •Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships this repair kit across all 47 Kenyan counties with pay-on-arrival delivery, so you only pay once the pack reaches you. Nairobi and its environs receive same-day delivery. All other major cities and towns, including Mombasa, Kisumu, Nakuru, Eldoret, Kakamega, Nyeri, and Garissa, receive next-business-day delivery. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Every unit is covered by the 6-month Mascom warranty stated above, with claims coordinated at our Nairobi CBD service desk.
Buyers across Kenya rely on Mascom International for verified specifications, current market pricing, and direct after-sales backing on every repair accessory we stock.
Disclaimer: We can not guarantee that the information on this product is 100% correct
Full description here
SOCIAL MEDIA