Payment Methods
1. Lipa Na M-PESA
Paybill No.: 5450522
Account No.: M
2. Cash on delivery
3. Cash on collection
Lenovo ThinkPad X1 Yoga 3rd Gen Screen Assembly | 14-Inch FHD and WQHD Touch Panel, Bezel and Hinges, Machine Types 20LD 20LE 20LF 20LG
Restore a smashed or dark 2018 two-in-one to daily use — every order matched against your factory resolution before dispatch
Condition: New
Note: price and availability are subject to change without prior notice
Lenovo ThinkPad X1 Yoga 3rd Gen screen assembly is now in stock at Mascom International for KSh 26,000, brand new and sealed, covering the 2018 machine types 20LD, 20LE, 20LF and 20LG. The Lenovo ThinkPad X1 Yoga 3rd Gen screen assembly ships as one bonded unit: LCD panel, touch digitizer glass, touch control board, front bezel, rear cover, and both 360-degree hinges seated and aligned. Both factory resolutions are held in stock, 1920x1080 FHD and 2560x1440 WQHD. Buy the Lenovo ThinkPad X1 Yoga 3rd Gen screen assembly over the counter at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD.
A shattered lid does not retire a laptop that still works. This part is ordered most often by independent repair technicians along Luthuli Avenue and Ronald Ngala Street, corporate IT desks in Upper Hill and Westlands, auditors and advocates who dropped a unit while it sat in tablet mode, and NGO field staff coming back from Turkana and Marsabit postings with spider-cracked glass. A healthy X1 Yoga 3rd Gen carrying a Core i7-8650U, 16GB of RAM and a 512GB NVMe drive still fetches KSh 55,000 to KSh 85,000 on Kenya's used-import market. Spending KSh 26,000 on the lid puts that whole machine back to work.
Where most Nairobi electronics shops sell only a bare LCD and leave the bezel, control board and hinges for you to source, Mascom International supplies the Lenovo ThinkPad X1 Yoga 3rd Gen screen assembly whole. Technicians tell us the lid swap runs 30 to 45 minutes against roughly two hours for a stripped-panel rebuild, with far less chance of cracking fresh glass during reassembly. Carry your laptop into our Nairobi CBD store and our staff read the type label and resolution against stock before you pay, or order the Lenovo ThinkPad X1 Yoga 3rd Gen screen assembly for pay-on-arrival delivery countrywide.
Common Questions About the Lenovo ThinkPad X1 Yoga 3rd Gen screen assembly
How do I tell a 3rd Gen lid apart from the 2nd and 4th generation versions?
By the four-character type code printed on the underside label near the rear hinge. The 3rd Gen reads 20LD, 20LE, 20LF or 20LG and was built in 2018. The 2nd Gen reads 20JD to 20JG, and the 4th Gen reads 20QF or 20SA. Cable length, bezel depth and hinge mounting points differ across all three, so a wrong-generation lid will not seat. Send a photo of that label to Mascom International on WhatsApp and we confirm it free.
My display shows vertical lines and half a picture. Will a new assembly fix that?
Usually yes. Vertical or coloured lines that stay fixed on screen, a milky white glow, or an image that survives only on an external monitor all point to the panel or its cable rather than the mainboard. The test is simple: plug in an external monitor through Thunderbolt 3. If the outside picture is clean, the fault sits in the lid. Bring the machine to Kimathi Street and our bench runs that check for you before you commit.
My laptop has the Dolby Vision HDR screen. Does that need a different assembly?
Yes, and this matters. The X1 Yoga 3rd Gen shipped with three panels: FHD at 300 nits, WQHD at 300 nits, and WQHD with Dolby Vision at 500 nits and full colour gamut coverage. The two WQHD versions use a 40-pin connector while FHD uses 30-pin. Fitting the wrong one gives a blank screen. Check Windows Settings, then System, then Display for your recommended resolution, then quote it to us before payment.
Do the ThinkShutter camera cover and infrared face login still work afterwards?
They do, provided the assembly matches your camera specification. The 3rd Gen shipped either with a 720p webcam and the sliding ThinkShutter privacy cover, or with an infrared module for Windows Hello face sign-in without the shutter. The bezel cut-out differs between them. Tell Mascom International which one your laptop carries, or send a close photo of the top bezel, and we match the part number. Windows Hello re-enrols normally after fitting with no driver reinstall.
Can Mascom International fit the assembly for me, and how long does it take?
Yes. Our Nairobi CBD service desk handles fitting for walk-in customers, and a straightforward swap on this model takes 30 to 45 minutes on the bench. Bring the laptop and your charger. We disable the internal battery in BIOS first, transfer the webcam module and display cable where needed, then test touch, pen tracking and all four hinge postures before handing it back. Fitting is quoted separately from the KSh 26,000 part price. Ask when you book.
Is KSh 26,000 sensible on a 2018 laptop?
Run the numbers. A clean X1 Yoga 3rd Gen with a Core i7-8650U, 16GB of RAM and a 512GB drive trades at KSh 55,000 to KSh 85,000 in Kenya. The lid is roughly a third of that at worst. You keep your storage, your installed software and your Windows licence, and you skip the data migration entirely. If the keyboard, battery and mainboard are sound, the repair pays for itself against any replacement machine at the same specification.
Will I need to reinstall drivers or recalibrate touch after fitting?
No, not on a like-for-like swap. The touch controller sits on the assembly itself and reports to Windows through the existing display stack, so the panel enumerates on first boot. Your garaged ThinkPad Pen Pro pairs and writes as before because the pen digitizer layer is bonded into the part. Run Windows Update once after fitting so camera and sensor entries settle. If a touch zone reads badly, our service desk recalibrates at no charge.
How fast can you get the assembly to Kisumu or Mombasa, and how do I pay?
Nairobi and its environs receive the part the same day. Mombasa, Kisumu, Nakuru, Eldoret, Nyeri, Thika, Meru, Kakamega and every other major town receive it within 1 business day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days. Every order travels pay-on-arrival, so you open the packaging, inspect the glass, and only then release payment by M-Pesa or cash to the courier.
Technical Specifications
Panel Options and Picture Quality
- 14.0-inch IPS panel in 16:9 shape, matching the original Lenovo lid footprint and screw pattern exactly.
- FHD version runs 1920x1080 at 300 nits, sufficient for indoor office lighting across Nairobi CBD workspaces.
- WQHD version runs 2560x1440 at 300 nits, giving 210 pixels per inch for sharper document text.
- Dolby Vision WQHD version reaches 500 nits with full colour gamut coverage for outdoor and photo work.
- Anti-reflective and anti-smudge coatings hold up during tablet-mode note taking and direct window glare.
- Viewing angles of 170 degrees keep colour stable when the lid is folded flat for client presentations
Touch Layer and Pen Input Hardware
- Capacitive layer reads 10 contact points at once, so pinch, rotate and multi-finger gestures behave normally.
- Active pen layer supports the ThinkPad Pen Pro that charges inside the chassis silo on this model.
- Digitizer is factory-bonded to the glass, removing the air gap that causes parallax when writing.
- Touch control board arrives fitted to the assembly, so no separate board transfer is needed.
- Pressure sensitivity and palm rejection run from the base chassis and are untouched by a lid swap.
- Windows loads the existing touch stack on first boot after a like-for-like fitting, with no driver work.
Compatible Machine Types and Lenovo Part Numbers
- Fits ThinkPad X1 Yoga 3rd Gen machine types 20LD, 20LE, 20LF and 20LG, all 2018 production.
- FHD assemblies carry FRU numbers 01AY922, 01AY923, 01YT242 and 01YT243 on a 30-pin eDP connector.
- FHD panel models include B140HAN03.1 and B140HAN03.6, both glossy IPS units with bonded touch.
- WQHD assemblies carry FRU numbers 01YT246 through 01YT251, plus 01AY924, 01AY926 to 01AY929 and 02HL922.
- WQHD panel models include B140QAN02.0, LPM140M420 and LP140QH2(SP)(A1) on a 40-pin connector.
- Does not fit X1 Yoga 1st Gen types 20FQ and 20FR, or 2nd Gen types 20JD to 20JG.
Complete Lid Module Composition
- Ships as a bonded panel and digitizer already seated in the front bezel, with no adhesive work needed.
- Rear cover is included, pre-drilled for the hinge brackets and moulded with antenna routing channels.
- Left and right 360-degree hinges arrive fitted and torque-set, holding any angle without drift.
- Bezel carries the correct cut-out for either the 720p ThinkShutter module or the infrared camera.
- Existing Wi-Fi antenna leads route through the supplied cover without cutting, taping or modification.
- Webcam module and internal display cable transfer from your old lid unless ordered separately from us.
Fitting Process and Bench Requirements
- Tools needed are a PH0 Phillips driver, a plastic spudger and roughly 30 to 45 minutes of bench time.
- The internal battery must be disabled in BIOS or unplugged before the display connector is touched.
- Seat the eDP connector fully and refit the retaining tape, since a loose connector causes flicker or blank output.
- Test finger touch, pen tracking and laptop, tent, stand and tablet postures before closing the base screws.
- Run Windows Update once after fitting so camera and sensor entries re-enumerate without errors.
- Mascom International fits the part at our Nairobi CBD service desk for customers who prefer a technician.
Durability and Quality Standards
- Dead pixel handling follows the ISO 13406-2 Class 1 standard applied to all laptop panels sold in Kenya.
- Panel bonding tolerates the dust along Thika Road and Mombasa Road and coastal humidity in Mombasa and Diani.
- Rear cover uses the carbon-fibre-reinforced build Lenovo specified for the original ThinkPad X1 lid family.
- Closed lid thickness matches the 17.05mm factory profile, so the laptop still fits its original sleeve.
- Assembly weight sits close to the factory lid, keeping the machine balanced in tent and stand postures.
- Each unit is bench-tested for backlight, touch response and pen tracking before it leaves Kimathi Street.
Package Contents
Every Lenovo ThinkPad X1 Yoga 3rd Gen screen assembly from Mascom International is packed in anti-static wrap and protective foam, containing:
- Full 14-inch lid with bonded panel, digitizer, touch control board, front bezel and rear cover
- Left and right 360-degree hinges pre-fitted and torque-set
- Mascom International receipt and warranty slip
Note:Webcam module and display cable move across from your existing lid unless ordered separately. Ask our Kimathi Street counter staff to add either item.
Warranty
Mascom International backs this screen assembly with a 6-month warranty on manufacturing defects, covering dead pixels, backlight failure and unresponsive touch zones under normal use. Accidental damage after fitting falls outside cover. Claims are handled directly at our Nairobi CBD service desk, and we ask that fitting is carried out by a competent technician.
Where to Buy the Lenovo ThinkPad X1 Yoga 3rd Gen screen assembly in Kenya
The Lenovo ThinkPad X1 Yoga 3rd Gen screen assembly is available now at Mascom International, located at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Visit Monday through Saturday, 9:00 AM to 7:00 PM, and bring the laptop so our team can read the machine type and confirm your resolution against stock before you pay. The part is supplied in the standard black finish.
Order through any of the following:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships this part across all 47 Kenyan counties with pay-on-arrival delivery, so you settle only when it reaches you. Nairobi and its environs receive same-day delivery. All other major cities and towns, including Mombasa, Kisumu, Nakuru, and Eldoret, receive next-business-day delivery. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Every unit leaves our counter with the 6-month Mascom warranty stated above.
Repair shops and IT departments across Kenya rely on Mascom International for correct part matching, honest pricing, and after-sales backing handled from our Nairobi CBD store.
Disclaimer: We can not guarantee that the information on this product is 100% correct
Full description here
SOCIAL MEDIA