Green Lion Prestige MagSafe Case | iPhone 18 Pro Max | 2800GS Magnetic Hold | Hybrid PC and TPU Shell | Metal Side Buttons
Grip that stays clean under sweaty palms, with a raised lip guarding the lenses and screen edge from tarmac.
Condition: New
Note: price and availability are subject to change without prior notice
The Green Lion Prestige MagSafe Case is now in stock at Mascom International for KSh 3,000, cut for the iPhone 18 Pro Max and sold over the counter at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Green Lion builds this shell from three bonded layers of TPU, polycarbonate, and TPU again, weighs it at 118 grams, and rings the back with magnets rated at 2800 gauss. Machined metal side buttons replace the moulded plastic kind. Apple unveils the iPhone 18 Pro Max at its September 9 event, and the Green Lion Prestige MagSafe Case sits on our shelf ahead of that date.
Anyone paying north of KSh 200,000 for a new iPhone wants it covered on day one. The Green Lion Prestige MagSafe Case suits banking staff working Upper Hill and Riverside Drive, consultants who leave a handset face-down on boardroom tables in Westlands, and doctors crossing between wards at Aga Khan and Nairobi Hospital. Those phones live in a hand all day, and a bare back panel turns slippery once palms warm up. The anti-fingerprint coating keeps a dark finish from becoming a smudge map by lunchtime.
Unlike other electronics retailers in Kenya, Mascom International holds the Green Lion Prestige MagSafe Case in stock before the handset itself lands on local counters, so your iPhone 18 Pro Max goes into a shell the same day you unbox it. Buyers throughout Kenya tell us the 2800 gauss magnet ring settles the decision, because weaker cases let a dashboard mount shake loose on the rough stretches of Mombasa Road. Walk into our Kimathi Street store to handle the Green Lion Prestige MagSafe Case yourself, or order it for pay-on-arrival delivery across all 47 counties.
Common Questions About the Green Lion Prestige MagSafe Case
What separates this case from Green Lion's cheaper clear shells?
Material and hardware. The Prestige uses three bonded layers, soft TPU inside, rigid polycarbonate in the middle, and TPU again outside, where a basic clear case is one moulded piece. It also carries machined metal side buttons and a 2800 gauss magnet ring, which the entry-level shells do not. At KSh 3,000 it costs roughly double Green Lion's clear covers. You pay for button feel, magnet strength, and a surface that resists fingerprints.
How strong is a 2800 gauss magnet hold in daily use?
Strong enough for a dashboard mount on Thika Road and for a MagSafe wallet in a jacket pocket. Gauss measures magnetic pull, and 2800 sits in the band Apple targets for its own covers, so chargers, mounts, wallets, and battery packs snap on and stay aligned. Turn the phone upside down and the wallet holds. It will not carry the phone by the wallet alone, and no magnetic case does.
Does the anti-fingerprint coating keep a dark case looking clean?
Mostly, yes. The coating is a surface treatment that stops skin oil spreading into a visible film, so marks wipe off with a dry cloth rather than smearing. On the Black and Midnight Blue finishes you will still see the odd mark after a hot afternoon, but nothing like an untreated glossy shell. Users consistently report the Silver finish hides marks best. A weekly wipe keeps any of the four looking new.
Do the metal side buttons feel different from the phone's own buttons?
Yes, and that is the point. Moulded plastic buttons go soft and vague after a few months because the plastic flexes and never fully returns. This shell uses machined metal caps sitting directly over the side keys, so each press gives a clear click with no mush behind it. The cutouts leave every side control reachable without pressing through a rubber layer. Frequent camera and volume users notice the difference within a week.
Does the raised camera edge protect the lenses on a flat table?
Yes. Green Lion moulds a lip that stands proud of the camera plateau, so the lens glass never touches a desk, counter, or matatu seat when the phone lies face-up. The screen side carries a matching lip, which holds the display clear of tarmac on a flat face-down landing. Neither lip replaces tempered glass or a dedicated lens guard, but both stop the everyday scratching that dulls resale value.
Which other iPhone models does this shell fit?
Green Lion cuts the Prestige for four handsets: iPhone 18 Pro Max, iPhone 17 Pro Max, iPhone 18 Pro, and iPhone 17 Pro. The Pro Max shells carry an M in the product code and the smaller Pro shells do not, so a Pro Max case will not seat on an iPhone 18 Pro. Bring your handset to our Kimathi Street counter and we will fit the correct size in front of you before payment.
Is hybrid polycarbonate and TPU better than silicone in Kenya's heat and dust?
For most buyers, yes. Silicone grips well but attracts lint and road dust, and it stretches at the corners after months in a hot Nairobi car. The rigid polycarbonate mid-layer here holds its shape and spreads impact, while the two TPU layers soak up shock. Dust brushes off the treated surface instead of clinging. Silicone still wins on raw grip, so pick silicone if softness matters more than shape retention.
Is KSh 3,000 justified against a generic cover from town?
A cracked back panel on a Pro Max costs more than KSh 40,000 to replace in Nairobi, so the maths is simple. A KSh 500 street cover gives you a thin shell with no magnet ring, plastic buttons that soften within weeks, and a finish that yellows in months. This case holds MagSafe accessories properly, keeps its button feel, and comes with a Mascom warranty you can claim at a physical counter on Kimathi Street.
How do I clean the shell after months of matatu commutes?
Pop the phone out, wipe the inside with a dry microfibre cloth, and use a slightly damp cloth with plain water on the outside. Skip alcohol, acetone, and household cleaners, which strip the anti-fingerprint layer. Dust trapped between the case and the phone is what scratches a back panel, so a monthly clean matters more than most owners expect. Let it dry fully before refitting. The magnet ring needs no attention.
Technical Specifications
Three-Layer Material Build
- Soft inner TPU layer cushions the phone and stops the shell scuffing the back panel during fitting.
- Rigid polycarbonate mid-layer holds shape and spreads impact force across the shell instead of one corner.
- Outer TPU skin absorbs shock at the edges, where most drops land after a phone slips.
- Full-cover shape wraps all four sides plus the back, leaving only screen and camera openings exposed.
- Total weight sits at 118 grams, adding grip without turning a large-screen phone into a two-hand device.
- Green Lion rates the build for everyday falls, meaning pocket height onto tile or desk height onto concrete.
Magnetic Ring Strength and Charging Behaviour
- Built-in magnet ring rated at 2800 gauss, matching the pull band Apple targets for its own covers.
- Wireless charging runs at normal speed through the back panel, so the case never comes off.
- MagSafe wallets, dashboard mounts, and battery packs snap on and stay aligned over rough road surfaces.
- Magnet ring is sealed inside the shell, so it cannot shift, rattle, or work loose.
- Wired charging stays available, with the port cutout sized for wide third-party cable heads sold locally.
Lens Guard and Display Lip
- Raised lip circles the camera plateau, keeping the lens glass off desks, counters, and matatu seats.
- Matching lip along the screen edge holds the display clear of the ground on face-down landings.
- Cutouts leave the flash and sensor array unobstructed, so night shots keep their colour balance.
- Lip height stops table scratches but does not replace tempered glass or a separate lens protector.
- Camera opening is cut for the iPhone 18 Pro Max plateau and will not align on smaller models.
Metal Side Controls and Port Access
- Machined metal caps sit over the side keys, giving a defined click instead of a soft press.
- Metal holds its feel far longer than moulded plastic, which flexes and softens within a few months.
- Side cutouts leave every control reachable without pressing through a rubber cover.
- Speaker and microphone openings stay clear, so call volume and video audio record at full level.
- Port cutout clears the bulky third-party cable heads common in Nairobi phone shops and matatu chargers.
Anti-Fingerprint Finish and Daily Handling
- Surface treatment stops skin oil spreading into a visible film, so marks wipe away with a cloth.
- Textured sides give grip without dragging on trouser pockets or catching inside a laptop bag sleeve.
- Anti-scratch coating resists the key and coin marks that dull an untreated shell within weeks.
- Finish resists yellowing, a common failure on cheap clear cases after months of direct Nairobi sun.
- Clean with plain water on a damp cloth, since alcohol and household cleaners strip the coating.
Device Fit, Weight, and Colour Options
- Cut for iPhone 18 Pro Max, with the same shell also listed by Green Lion for iPhone 17 Pro Max.
- Separate Pro-sized shells exist for iPhone 18 Pro and iPhone 17 Pro and will not fit the Max.
- Four finishes in the Green Lion range: Black, Midnight Blue, Silver, and one further shade.
- Slim-profile build keeps the phone in a jacket pocket or laptop bag sleeve without forcing a resize.
- All finishes share the same magnet strength, metal buttons, and layer structure, with only colour differing.
- Green Lion product codes for the Max size run GNMXMG18PMBK, GNMXMG18PMBD, GNMXMG18PMBL, and GNMXMG18PMSL.
Package Contents
Every Green Lion Prestige MagSafe Case ships in Green Lion retail packaging containing:
- One Prestige MagSafe Case in your chosen finish
- Green Lion product documentation
Note:Cases ship without screen protectors or lens guards. Mascom International stocks tempered glass and lens protectors for the iPhone 18 Pro Max separately, and our Kimathi Street counter fits them while you wait. MagSafe chargers, wallets, and car mounts are also stocked in store for anyone building a full kit around the case.
Warranty
The Green Lion Prestige MagSafe Case carries a 6-month Mascom International warranty on manufacturing defects, covering magnet failure, button failure, and separation of the bonded layers under normal use. Wear from drops, scratches, and colour fading sits outside that cover. Our Nairobi CBD service desk handles claims directly and issues replacements over the counter once a fault is confirmed.
Where to Buy the Green Lion Prestige MagSafe Case in Kenya
The Green Lion Prestige MagSafe Case is available now at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, to handle the case and test the magnet against your own charger before you pay. Available colours: Black, Midnight Blue, Silver, and one further finish.
Order through any of the following:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International reaches all 47 Kenyan counties with pay-on-arrival delivery, so you inspect the case and pay only when it arrives. Nairobi and its environs receive same-day delivery. Mombasa, Kisumu, Nakuru, Eldoret, and every other major town and city receive it within 1 business day. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Every unit is covered by the 6-month Mascom warranty stated above, with claims handled at our Nairobi CBD service desk. Buyers across Kenya rely on Mascom International for accurate specifications, current pricing, and honest after-sales backing on every phone case we stock.
Disclaimer: We can not guarantee that the information on this product is 100% correct
Full description here

SOCIAL MEDIA