Payment Methods
1. Lipa Na M-PESA
Paybill No.: 5450522
Account No.: M
2. Cash on delivery
3. Cash on collection
Budi 558 Universal Car Mount Holder | Magnetic Phone Bracket | 360 Degree Rotation | Dashboard Mounting | ABS Shell
Hands-free navigation support for Nairobi drivers, matatu operators, and ride-hailing crews who need their screen steady on rough county roads.
Condition: New
Note: price and availability are subject to change without prior notice
Budi 558 Universal Car Mount Holder is now in stock at Mascom International for KSh 1,200, and it solves one problem well: keeping your phone visible while you drive. The Budi 558 ships under manufacturer code CM558B with a magnetic head, 360-degree rotation, and an ABS shell weighing roughly 70 grams. There is no clamp to squeeze, no spring arm to snap, and no cradle to fight with at a traffic light. You can collect the Budi 558 Universal Car Mount Holder from Mascom International at Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD, or order it for countrywide delivery to any of Kenya's 47 counties.
Kenyan drivers running Google Maps through Mombasa Road traffic, ride-hailing operators taking trip requests every few minutes, boda boda riders checking drop-off pins, and sales reps covering Nakuru and Eldoret routes all face the same problem. A phone lying flat on the passenger seat means eyes off the road. A phone wedged into an air vent slides out over the first speed bump. The Budi 558 puts the screen at eye level and holds it there. Because the connection is magnetic rather than mechanical, you attach and detach the handset one-handed, without looking down and without adjusting anything.
Unlike other electronics retailers in Kenya who stock unbranded holders with no model code and no after-sales cover, Mascom International sells the Budi 558 as a traceable CM558B unit backed by a written warranty. Budi has manufactured mobile accessories since 2009 and carries international certifications including CE, FCC, and RoHS. Customers across Nairobi report that the magnet stays locked on Ngong Road potholes and Thika Road expansion joints where suction cradles let go. At Mascom International, we're seeing steady repeat demand for the Budi 558 from fleet owners buying five and ten units at a time. Walk into the shop to test one, or call to reserve stock.
Common Questions About the Budi 558 Universal Car Mount Holder
Is the Budi 558 magnet strong enough to hold a large phone on rough Kenyan roads?
Yes, provided the metal plate sits centred behind the handset. Budi rates the 558 to hold heavier devices, and centring matters more than raw magnet strength. A plate stuck near the phone's edge gives the handset a pivot point, and that pivot is what lets it swing off on hard bumps. Fitted at the centre of mass, drivers report the 558 holds a 230-gram Galaxy S-series or iPhone Pro Max through Ngong Road potholes without shifting.
Will the Budi 558 magnet damage my phone or block my signal?
No. Modern smartphones store data on flash memory, which magnets cannot erase, and the magnetic field on the 558 is static rather than alternating. Your Safaricom or Airtel signal, GPS lock, and NFC tap-to-pay keep working normally. The one real caution is placement of the supplied metal plate: stick it away from the wireless charging coil, usually the upper or lower third of the back panel, so the phone still charges on a Qi pad. Cards with magnetic strips should not sit between plate and magnet.
Where can I mount the Budi 558 inside my car?
Any flat, clean, rigid surface takes it. The adhesive base is designed for the dashboard, the centre console lip, or the flat panel beside the infotainment screen. Textured or heavily grained dashboards hold less reliably than smooth ones, so wipe the spot with alcohol and press for 30 seconds before loading a phone. Give the adhesive a full 12 hours to cure before first use. Mounting low and central keeps the handset out of your forward sightline and away from airbag deployment zones.
Does the Budi 558 work with a phone case on?
Yes, with one condition: the metal plate has to sit between the magnet and the phone. Most Kenyan buyers stick the plate on the outside back of a slim TPU or silicone case, which keeps the phone itself unmarked. Thick rugged cases over 3mm reduce holding force noticeably because magnetic pull drops sharply with distance. If you run an Otterbox-style case, place the plate on the case exterior rather than inside it. MagSafe iPhone cases with built-in magnet rings also attach directly.
How does the Budi 558 handle Nairobi heat and direct dashboard sun?
The ABS shell tolerates the temperatures a parked car reaches in Nairobi and Mombasa without warping or going brittle. Adhesive is the weaker link in any dashboard mount: a car left in full midday sun with the windows closed can push dashboard surfaces past 70 degrees Celsius, which softens adhesive over months. Two habits extend life considerably. Park in shade or use a windscreen sunshade where you can, and remove the phone rather than leaving it baking on the mount.
Who should buy the Budi 558?
Anyone who navigates or takes calls while driving. Bolt and Uber drivers gain the most, since they check trip screens dozens of times per shift and need one-handed attachment between passengers. Delivery riders, sales representatives covering Nakuru, Kisumu, and Eldoret territory, logistics coordinators on the Nairobi-Mombasa corridor, and field engineers with long county drives all use it daily. It also suits ordinary commuters who simply want Google Maps visible on the school run without balancing a phone on their knee.
Is the Budi 558 worth KSh 1,200 compared to cheaper clamp holders?
Clamp holders sold on the street for KSh 300 to KSh 500 use spring arms and plastic hinges that fail within months, usually cracking at the pivot. The 558 has no moving jaw, so the most common failure point simply does not exist. At KSh 1,200 across an expected two-year service life, the cost works out under KSh 2 per day. You also get a named model code, brand certifications, and warranty cover that unbranded market holders cannot offer.
What comes in the Budi 558 retail box?
The holder itself, the metal plate that adheres to your phone or case, an adhesive base pad, and printed fitting instructions. Nothing else is required, and no charging cable or power source is involved because the 558 is entirely mechanical. Mascom International stocks spare metal plates separately if you want to fit plates to two phones and swap between them. Our Kimathi Street counter staff will fit the plate for you correctly on the day of purchase.
Technical Specifications
Magnetic Holding Hardware
- Magnetic head grips through the supplied metal plate, holding the handset without any clamp, jaw, or spring mechanism
- Holding force is strongest when the plate sits at the phone's centre of mass rather than near an edge
- Static magnetic field poses no risk to flash storage, so photos, apps, and contacts remain untouched
- No contact points press against the phone body, which means no scratched frames or squeezed side buttons
- One-handed attachment lets you place and lift the phone at a red light without taking your eyes off the road
- Magnetic connection releases instantly under a straight pull, so grabbing the phone in a hurry never snags
Mounting Surfaces and Installation
- Adhesive base fixes to dashboards, console lips, and flat trim panels beside the infotainment screen
- Smooth surfaces hold far better than heavily textured plastic, so choose the flattest available panel
- Clean the mounting spot with alcohol wipes and press firmly for 30 seconds to set the bond
- Allow 12 hours of curing time before loading a phone onto the mount for the first time
- Installation takes under two minutes with no tools, drilling, screws, or vehicle wiring involved
- Low central mounting keeps the phone clear of your forward view and away from airbag deployment paths
Rotation and Viewing Angle Control
- Full 360-degree rotation switches the screen between portrait and landscape without removing the phone
- Portrait suits turn-by-turn Google Maps directions; landscape suits split-screen ride-hailing trip views
- Angle adjusts to match your seating height, so tall and short drivers both get a readable screen
- Rotation happens against the magnet, meaning you reposition with one thumb while stationary
- Passengers can turn the screen toward themselves to enter a destination without unmounting anything
Device Compatibility
- Works with any smartphone once the supplied metal plate is fitted, regardless of brand or screen size
- Compatible with Samsung, Apple, Tecno, Infinix, Xiaomi, Oppo, and every other handset sold in Kenya
- MagSafe iPhone models and cases with built-in magnet rings attach directly with no plate needed
- Slim TPU and silicone cases pose no problem; rugged cases thicker than 3mm cut holding force
- Also holds small GPS units and portable media players fitted with a plate, useful for fleet vehicles
- No charging function is included, so pair it with a separate car charger for long navigation sessions
Build Materials and Daily Durability
- ABS plastic construction resists cracking and stays dimensionally stable across Kenya's temperature range
- No hinges, springs, or sliding jaws means the usual failure points of clamp holders are absent
- Dust from Mombasa Road and unpaved county routes does not clog any mechanism because none exists
- Coastal humidity in Mombasa, Malindi, and Diani causes no corrosion on the sealed magnetic head
- Sealed body needs no maintenance beyond an occasional wipe of the magnetic face with a dry clot
Size Weight and Cabin Footprint
- Unit weighs roughly 70 grams, light enough that the adhesive base carries it without stress over time
- Retail packaging measures 18 x 9 x 3 centimetres, small enough to post or hand-carry easily
- Low profile keeps the mount below dashboard eye line so it never obstructs your view of the road
- Compact footprint suits small cabins including Toyota Vitz, Suzuki Alto, Mazda Demio, and Probox
- Leaves the dashboard vents unblocked, so cabin cooling is not restricted the way vent clips restrict it
Package Contents
- Budi 558 Universal Car Mount Holder (CM558B, black)
- Metal plate with adhesive backing for the phone or case
- Adhesive base pad for the dashboard or console
- Printed fitting and positioning instructions
Note:Spare metal plates and compatible car chargers are stocked separately at Mascom International.
Warranty
The Budi 558 Universal Car Mount Holder carries a 6-month Mascom International warranty on manufacturing defects under normal use. Adhesive pads are treated as consumable and sit outside warranty cover, but our Nairobi CBD service desk will supply replacement adhesive at cost. Warranty claims are handled directly at our Kimathi Street counter with your receipt.
Where to Buy the Budi 558 in Kenya
The Budi 558 Universal Car Mount Holder is available now at Mascom International, Old Mutual Building, First Floor Room 4, Kimathi Street, Nairobi CBD. Walk in Monday through Saturday, 9:00 AM to 7:00 PM, and test the magnet with your own phone before you buy. Stock is currently black.
Order through any of the following:
- Phone/WhatsApp: +254 708 852 521
- Email: info@mascomintl.com
- Website: www.mascomintl.com
Mascom International ships the Budi 558 to all 47 Kenyan counties with pay-on-arrival delivery, so you inspect the holder and pay only once it reaches you. Nairobi and its environs receive same-day delivery. All other major cities and towns, including Nakuru, Eldoret, Kisumu, Mombasa, Kakamega, and Kisii, receive next-business-day delivery. Mandera, Wajir, Marsabit, Lamu, Tana River, and Turkana receive delivery within 2-3 business days.
Every unit ships with the 6-month Mascom warranty stated above, and fleet buyers ordering five units or more should ask about bulk pricing when they call. Buyers across Kenya rely on Mascom International for honest specifications, current pricing, and support that continues after the sale on every car accessory we stock.
Disclaimer: We can not guarantee that the information on this product is 100% correct
Full description here
SOCIAL MEDIA